w 100 used for sale

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders, ISO cylinders, micro cylinders -Manufacturer: Pneumax, pneumatic cylinders, ISO cylinders, micro cylinders -Type: 1261.20.100 -Stroke travel: 100 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Pressure: max. 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 220/28/H33 mm -Weight: 0.2 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Afriso, manometer 0-10 bar, unused, original packaging -Type: RF 100 Ch -Item No.: 85215432 -Screw connection: G 1/2B ax. -Number: 2x pressure gauges available - Price: per piece -Cardboard dimensions: 140/140/H115 mm -Weight: 0.7 kg/piece

Pressure gauge, test gauge, pressure measuring device with Bourdon tube, pressure and temperature measurement technology, Bourdon tube pressure gauge, pressure tester, pressure tester, Bourdon tube pressure gauge -Manufacturer: Afriso, Bourdon tube pressure gauge 0-4 bar, unused, original packaging -Type: RCh 100- rFr -Screw connection: G 1/4 A -Quantity: 1x pressure gauge available -Cardboard dimensions: 140/140/H115 mm -Weight: 0.7 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Afriso, Manometer 0-4 bar, unused, original packaging -Type: RF 100 Ch -Item No.: 85213432S -Screw connection: G 1/2B ax. -Quantity: 1x pressure gauge available -Cardboard dimensions: 140/140/H115 mm -Weight: 0.7 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: -100-0 kPa / -1-0 bar, unused, original packaging -Size: Ø 100 mm -Number: 18x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.5 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: 0-60 MPa / 0-600 bar, unused, original packaging -Size: Ø 100 mm -Number: 11x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.7 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: R 100-1 rFr 0-2.5 bar G1/2 A -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 140/135/H110 mm -Weight: 0.6 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: RCh 100-3 rFr 0-1.6 bar G1/2 A -Number: 5x pressure gauges available -Price: per piece -Cardboard dimensions: 140/140/H105 mm -Weight: 0.8 kg/pc.

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: BBC, fuse-switch disconnector, circuit breaker 125 A, unused, original packaging -Type: SLP 100 -Quantity: 1x load break switch available -Cardboard dimensions: 170/110/H180 mm -Weight: 1.0 kg/piece

Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-M -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 22 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 65 mm -Brake -Protection class: IP 54 -Number: 4x motors available Price: per piece -Dimensions: 1150/300/H400 mm -Weight: 180 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-S -Transmission: SEW-Eurodrive type -Speed: 3000 rpm -Power: 18 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Number: 3x motors available Price: per piece -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-K -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 11 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Weight: 150 kg

-Metal Detector -Manufacturer: S+S Separation and Sorting Technology GmbH - Type: Ecoline 750/300/100 -Mains voltage: 230 / 115 VAC - Frequency: 50/60 Hz

Key data: 589 kN, 25 mm

Clamping force: 60t Year of Make: 2001 Injection Unit .../100 Screw diameter: 25 mm Spec. Spray pressure: 2240 bar Spray volume: 49 cc Clamping unit 600/... Clamping force: 60 t Size of the clamping plates: 446 x 446 mm Clearance spar spacing: 320 x 320 mm Tool installation height: 200 mm Opening travel: 350 mm Max. plate spacing: 550 mm Weight: 2440 kg Dimensions(m) LxWxH: 3.6 x 1.6 x 2.2 m Year of Make: 2001 Control type Selogica

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Solideal, 2 pieces of tires with tube and rim -Tire size: 23-5(150/100-13) -Pressure:bar -Bolt circle: Ø 162 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 27 kg/piece

A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible.

Manufacturer: Mazak Model: Integrex 100-4 Year of Manufacture: April 2006 Machine Weight: 6,000 kg Find more here - / Contact us at -

Lifting kneader Kemper F 100 SE Stainless steel kettle and kneading arm 2 gears, 1 time timer Robust technology Connection 400V, 16A-CEE plug Used machine

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - / Contact us at -

We will be happy to visit you and plan your machine. Addition, adaptation of crate bottle conveyors can be carried out by us. We can also manufacture new gripper heads.

We will be happy to visit you and plan your machine. Addition, adaptation of crate bottle conveyors can be carried out by us. We can also manufacture new gripper heads.

: neu : ca. 4 Monate ab Auftragse : Türkei : 59700 € : 1128.33 € : 100 to : 300 mm : 680x420 mm : 1100x600 mm : 500 mm : 17.5 mm/s : 5,5 mm/s : 37 mm/s : 7.5 kW : 1850 mm : 1400 mm : 2650 mm : 5400 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 kN, 25 mm

Clamping force: 60t Year of Make: 2001 Injection Unit .../100 Screw diameter 25 mm Spec. Spray pressure 2240 bar Injection volume 49 cc Clamping unit 600/... Clamping force 60 t Size of the clamping plates 446 x 446 mm Lights spar spacing 320 x 320 mm Tool installation height 200 mm Opening way 350 mm Max. panel spacing 550 mm Weight 2440 kg Dimensions(m) LxWxH 3.6 x 1.6 x 2.2 m Year of construction 2001 Control type Selogica

Very good spiral mixer KEMPER, type: SPL 100 -completely overhauled- - for 100 kg flour or 160 kg dough - completely overhauled - New bearings, rhymes, time clocks, painting - with center rod - 2 speeds in forward or reverse gear - Machine kmplett overhauled, as good as new, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Manufacturer: Boshite Model: TD-100 Type:Quilting Machine Voltage: AC 100-240V Frequency: 50/60 H Find more here - / Contact us at -

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

General SKU095T577 MakeZondervan Sneek No.S-2109-01 Year of construction1989 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) Information With switchcheck Floorspace1,5 x 0,8 m Total height1,4 m Weight430 kg Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the  :turning process. Not during! The same applies to the vacuum Tumbler mixersTea, herbs & coffeeZondervanMixers > Tumbler mixersIndustries > Food & Feed > T ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7400 € : 142.82 € : 100 to : fix : 300 mm : 1070 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2200 mm : 1500 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

180 Degree Belt Curve Conveyor, Transnorm, TS 1500 -100 – used - Price ex location: only 2.500.-€ (net) dismantled, packed and loaded! Manufacturer: Transnorm Type: TS 1500 -100 Year of Make: 1997 Nominal width: 700mm Inner radius 500mm Conveyor winch: 180 degrees Belt Type: KT 94 Dimensions: Incl. feet For further dimensions see sketch (measured without the engine) Condition: good Available: immediately Location: Frankenberg warehouse site

THERMO HAAKE Viscotester 550 Viscometer with PK 100 D Plate-Cone Measuring System Speed Range: 0.5 to 800 min-1 Uncertainty: ± 0.1% CD Mode: < 0.5% min-1 Torque Range (Ncm) up to 400 min-1: 0.01 to 3 Torque Range (Ncm) up to 800 min-1: 0.01 to 2 Uncertainty: ± 0.5% SDF Temperature range: 50 to +250 °C Power supply: 230/115 V (50/60 Hz) With measuring tank for coaxial cylindrical geometry With measuring unit PK 100D with multiple sensors The MV 3 st mobile is slightly damaged Viscotester 550: Typ002-7026 Haake PK 100 D: Typ002-2089

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : fix : 1500 mm : 300 mm : 1520 mm : 680 mm : 10 mm/s : 5 mm/s : 6 mm : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2275 mm : 2500 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand operating panel Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark

Planetary mixer Rego PM 100 EP Boiler size:Â 100 l Storage computer with recipe management Electric speed control Electric boiler height adjustment Digital time and speed display as well as electr. Automatic switch-off Quick tool change system Incl. 2x kettle, 1x whisk, 1x whisk, 1x whisk, 1x flat beater, 1x kneading spiral

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

General SKU255X230 LocationBarneveld MakeHosokawa Alpine Main Features Motor1.5 KW Inlet diameter50 mm Width100 mm Specified Features - Pin Mill Pin disc millcheck Rotor size100 mm Grinding room sizeDia. 180 mm Number of pins on house side:192 Number of pins on door side:192 Pin diameter0,3 mm Without sieve cagecheck Housing dimensions Dia. 180 mm With hoppercheck InletDia. 50 mm Feeding with vibro feedercheck 230 v. (Ex) Motor1,5 kW (400 v., 2835 rpm, (Ex)) Speed17500 rpm Information Type100 UPZ No.62390 Year of construction1998 With switchgearcheck (as is) Floor space0,40x0,60 m Total height0,95 m Weight55 kgPin MillsNew arrivalsHosokawa AlpineMills > Pin MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You  ...

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsNew arrivalsFryma KorumaProcessing vessels > Pro ...

PRESS DESIGN   quick die change system: yes SLIDE   total force (nominal): 100 to   stroke: 20 mm   stroke rate (max.): 80 /min TOOL DIMENSIONS   lower table (left-right): 430 mm   shut height max.: 220 mm Approx. 79 million strokes

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 4 Monate ab Auftragse : Italien : 31200 € : 595.92 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1550 mm : 25 mm/s : 2 mm/s : 2400 mm : 1200 mm : 2450 mm : 1960 kg HORIZONTAL MOVABLE CYLINDER 1.050 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3-100 mm drawing length: 750 mm working speed: 0-20 m/min boring diameter: 10-500 mm cutting speed: 0-20 m/min return speed: 0-50 m/min carrying capacity: 35.000 kg Power connection: 12,27 kW cutting capacity: 40.000 N machine table: 500 x 770 mm total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m Equipment / accessories: Original year of manufacture reconditioned in 2019 and equipped with new controler - dividing head - many accessories (grooving knives, tools, various) - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.