w 100 used for sale

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100|50|13 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Drive: . kW Capacity: . kg/h material: . 8 pieces For manipulator A5.1 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 UNITS OF 25,000KG/HR PACKAGED BOILER F&A 100 DEG. C [GAS STEAM BOILERS ARE POWERED BY NATURAL GAS TO CONVERT LIQUID TO GAS]

1 piece used FULL MOBILE CONCRETE MIXING PLANT SBM / SIMEM SMM 100 Year of construction 2007 Performance: 100 kbm/h Mixer unit Mixer SIMEM MSO 3000/2000 Additive dosing unit 2X 12.5l Cement scale 1200kg water dosing unit 600l Row silo / aggregate storage unit / compartment batcher Weighing belt 5000kg Aggregate/aggregate boxes: 4 X approx. 38.5 kbm Cement silos 4 X approx. 80 ton Fully automatic Dorner control Installed in a container Additive storage Installed in a container System is in a technically well-maintained and fully functional condition. Location: Austria Available: IMMEDIATELY Price: on request price net , ex location without guarantee and/or warranty, mistakes and/or false representations reserve, selling in current state – standing or recumbent, subject to prior sale

Offer 24820 Specifications: - Infinitely adjustable cutting current 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - max. cutting thickness - steel approx. 32 mm - Alu approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing plant - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 tons CNC control : AMADA OPERATOR II 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 415 mm Stroke: 200 mm Working height: 960 mm Crowning Engine power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools

Manufacturer: DIMA Model: HS-100 This device is known for its high precision and versatility, thanks to its robust construction and motor-driven printing head, which moves on linear bearings. All printer settings can be precisely adjusted using an intuitive Windows-based interface, allowing for perfect configuration for every type of printed circuit board. The self-learning feature ensures quick and easy determination of the correct board position, simplifying operations and speeding up the production process Find more here - / Contact us at -

Automatic feed via Diethei PD 100 control To the extension on the right Max. feed length: 2000 mm

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Analog Densitometer Macbeth RD-100, in exception good condition for its age, transistor lamps, in working condition.

Rubbel master RM 100 stone crusher, built 2010, overhauled this year, new radiator, regular serviced motor and newly repainted shell. Available immediately. Grid unit OS 100 from 2011. Ca. 7,524 working hours. Test and presentation possible can also organise transport inside EU with our own trailors. More photos on request.

Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

material width:150 mm material thickness:2,5 mm feed length:100 mm compressed air:6 bar clamping force of fastening pincer:2000 N clamping force of moving pincer:2000 N feeding force:1200 N weight:0,1 t Dimensions (WxDxH):0,35 x 0,85 x 0,5 m

material width:70 mm material thickness:0 - 1,5 mm feed length:100 mm material cross-cut:60 mm² feeding force:400 N clamping force of feeding pincer:1300 N air pressure - required:3 - 6 bar Weight:0,01 t Dimensions (WxDxH):0,4 x 0,4 x 0,7 m

PART NUMBER: 7552 Specifications: - dimensions of the hobs 2550x1350mm - number of batches 2 - electrically heated shelf - total ground clearance 400mm - Clearance between shelves 280mm and 100mm - Number of cylinders 4 - cylinder diameter 90mm - 1.1kW pump motor - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – very good condition – used press Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

SAPI Buffalo 100 blasting cabinet with YASKAWA robot Year of production: 2020 Serial Number: 20648 with industrial robot YASKAWA YR-1-06VX-A00, serial number: K18777-473-1 Control: YASKAWA Eras-1000-06VX8-E10

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Lifting kneader extendable Kemper Model: F 100 ASL for max. 160 kg dough/TA 160 (rye mixed bread dough) Stainless steel kettle 240 litres Dough machine with flour dust hood according to HACCP 2 tank cars Stainless steel kneading arm 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty + Spare parts service Option: Delivery & Floor Fastening Maintenance contract E-Box Service Package Instruction & Commissioning Many more lifting kneaders in stock!

pressure: 100 t punching cross-cut in cmm: -- stroke: 100 mm throat: 510 mm work height max.: 1100 mm Twist power: 31 Durchm. in 25 mm channels - flange: 100-400 mm Number of ventilators: 80-400 mm : 100-400 mm : 100-550 mm punch stroke: bei 20 mm Hub: 60 p.Min sheet thickness max.: bei Luftbiegung: 10 mm total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,7 x 0,9 x 2,3 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: RAL5015 sky blue Stand Type: PNFB 12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Drf2Qd Footplates The stands are pre-assembled (screwed truss) Frame height: 1,750 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

: neu : 2025 : 00774 : prompt, Zwischenverkauf v : Deutschland : 523.41 € : 1 : 100 mm : 32 mm : 12 kg Vice [felix] 2.0 100 Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Taper mandrel B18/MK II Reducing sleeve MK II/MK I The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tank crest: Airlock DN50 Front: Clapper bottom Manhole 350x450 mm oval Tasting tap Nozzle Flap Size 37 DN100 forward-drawn outlet surround with DN32 disc valve Properties: Volume;: 2100 L Material: V2A (AISI 304) 1.4301 Design: horizontal Last Use: Food Length: 1750 mm Cylinder length: 1000 mm Diameter: 1400 mm Surface inside: 2B=IIIC ground Surface outside: 2B=IIIC ground Important: Tanks are without a base. On request base or feet in V2A - for an extra charge.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: K The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Frame height: 2,000 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

for 100-600 g , 350 - 1000 g

for 100 - 600 g, 350 -1000 g

scoring and folding machine for integral covers. Machine for production of integral covers in two steps 1 x Petratto SAB 100 1 x Petratto SC 10 tipo 700 1 x Petratto 90 Belt feeder Antistatic device Side lay Scoring Movable control panel with touch screen Hotmelt gluing Format : 100 x 100 cm - 8 x 8 cm Max. speed : 120 m/min Max. copies/hour: 18 000 Weight : 150 to 500 g

Technical data of the pallet rack stand: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: creamy white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Column height: 9,000 mm Stand depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 60 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 470 mm   lower table (front-back): 470 mm   upper table (left-right): 500 mm   upper table (front-back): 470 mm   shut height max.: 277 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 180 ...

The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,