w 100 a used for sale

Key data: 27700 KW, 11000 V

27.7 MW Combined Cycle Gas Power Plant Wartsila 20V34SG 2 x 8.7 MW Wartsila 20V34SG Gas Generators Engine Type: Wartsila W20V34SG Engine output: 9.000 KW Year of built: 2009 Working Hours: 34.000 Hours On average Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 11000 kVA / 9 MW each Speed: 750 Rpm Control System: WECS 4 x Caterpillar 3520C Generating Sets Engine output: 2.000 KW Year of built: 2006-2007-2008 Working Hours: approx. 30.000 hours on average Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 11000 kVA / 2 MW each 2.3 MW Skoda Steam Turbine Turbine manufacturer: GUANGZHOU SKODA-JINMA Model: BN 2.3-17/7/360//190 Turbine output: 2300 kW Turbine type: Steam turbine Year of Make: 2011 Transformer output: 3 MVA Transformer rating: 31,5/6,6 KV Used 2 x YORK HW-14F3-50-C-S-C Absorption Chillers Manufact ...

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6300 mm y-travel: 2200 mm workpiece height: 1835 mm Table area: 6000x1835 mm Rest: 2 Side head: 2 number of T-slots: 7 T-slot - distance: 240 mm T-slot - width: 28 mm bed length: 14650 mm column daylight: 2075 mm feed: 5-60 m/min workpiece weight: 15000 kg total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 14,65x4,37x4,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mm turning length: 4000 mm control: Siemens type: 810 T turning diameter over slide: 700 mm spindle passage: 104 mm bed width: 710 mm turning speeds: 3,55-710 U/min max. workpiece weight between centres: 5000 kg steady: 500 mm Holder Multifix: total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . VDI 40 recordings24 piecesThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm swing diameter: 4000 mm turning height: 3150 mm slide adjustment: 1700 mm table load: 25 t turning speeds: U/min Feed: mm/U digital readout: Heidenhain Rest: 2 Side head: total power requirement: 90 kW weight of the machine ca.: 95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 950 mm turning diameter over slide rest: 569 mm turning length: 2200 mm spindle bore: 90 mm faceplate: 800 mm steady: 500 bed width: 580 mm Rapid travel: turning speeds: 800 U/min digital readout: stepless reg. with elect. turning speeds: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5300 mm swing diameter: 6300 mm turning height: 2800 mm slide adjustment: 1700 mm table load: 50 t turning speeds: 0,3-14 U/min Feed: 0,056-10 mm/U digital readout: Sony Rest: 2 Side head: chip conveyor: total power requirement: 120 kW weight of the machine ca.: 187 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 1000 U/min transmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 1,5 U.min-1 total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 4200 mm y-travel: 3000 mm dimension of the ram: 380x380 mm ram: horizontal adjustment: 500 mm spindle travel: 1200 mm Radial face slide diameter: 780 mm radial face slide travel: 250 mm rotary table:: Defum type: S-1600 Table dimensions: 1500x1500 mm table travel: 1100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial no .: 6749, optional: floor plaates Clamping angle dimensions (WxHxD): approx. 1800x1500x1000 cm, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm Table load: 3000 kg Daylight: 580 stroke: 95-800 mm total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 660 mm grinding length: 2000 mm workpiece weight: 1500 kg grinding wheel diameter: 400 mm control: X-As. Diatos 602 total power requirement: 12/22/30 kW weight of the machine ca.: t dimensions of the machine ca.: m Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 520 mm centre height: 500 mm width: 130 mm quill:: 3 St. diameter of quill: 70 mm bearing diameter: 65 mm width: 20 mm base plate: 415x270 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1320 mm turning diameter over slide rest: 820 mm turning length: 4400 mm Control: faceplate: 1200 mm bed width: 800 mm spindle passage: 167 mm steady: 480 control: IMS total power requirement: 76 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 630 t passage width: 1390 mm stroke: 400 mm table surface area: 1390x1250 mm total power requirement: 75 kW weight of the machine ca.: 36 t dimensions of the machine ca.: BxTxH 3200x2800x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 6 mm plate length: 0-6000 mm speed: 90 m/min material cross-cut: 1200 mm² total power requirement: 6 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 2x 500 kg coil internal dia.: Ø 300-540 mm coil outside dia.: Ø 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 620x500 mm ram surface: 310x260 mm hole in the table: Ø 250 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1200x1900x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ball Bushing Linear Guide, Open Linear Bearing Unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Foot: 81 x 29 mm Hole Spacing: 68 mm Material ( Housing ): Aluminum New ! Dimension: 81 x 58 x 54 mm

3D probe WIDAX 25612114 35910 holder: BT40 Dimensions: 280 x 65 x 65 mm

Hand press pliers WMW Type: PZ 60.1-U with replaceable press jaws for Al and Cu conductors Dimensions: 640 x 220 x 50 mm

INA I09 LKS 08VBG3 V1 ( I09LKS08VBG3V1 )

INA LFKL 52 E SF (205-155) ( LFKL52ESF(205-155) )

Twist drill WMW Ø 68 mm x 335 mm HSS total length: 335 mm spiral length: 130 mm Morse taper shank: MK5 used ! Dimensions: 335 x 70 x 70 mm

Linear guide carriage with linear guide rail INA Linear guide carriage: O4 D4 KWE 35 G3 V2 ( O4D4KWE35G3V2 ) table: 75.5 x 100 mm 4x Threaded hole: M10 x 1.5, continuous Hole spacing: 82 / 62 mm 4x Bore: Ø 7.5, continuous Hole spacing: 80 mm Linear guide rail: B7 TKD 3FG3/0300 ( B7TKD3FG3/0300 ) length: 300 mm, width: 34 mm, height: 23 mm through holes: Ø 9.5 / 15.0 mm, depth: 11 / 12 mm hole spacing: 80 mm used, tested ! Dimensions: 300 x 100 x 48 mm

This 3-axis WEMAS DZ 270 was manufactured in 2002. It features a turning diameter of 300 mm and a turning length of 754 mm. The machine is equipped with a HEIDENHAIN control unit and a 12-station disc turret from DUPLOMATIC, allowing for efficient tool management. If you are looking to get high-quality turning capabilities, consider the WEMAS DZ 270 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details.

; Gross weight [kg]: 1254; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 218

Twist drill WMW Ø 52 mm x 415 mm HSS Use: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 55 x 55 mm

Twist drill WMW Ø 54 mm x 415 mm HSS Usage: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill Bit WMW Ø 56 mm x 415 mm HSS Use: N Vapor Coated Overall Length: 415mm Spiral Length: 220mm Morse Taper Shank: MK5 New ! Dimensions: 440 x 60 x 60 mm