w 100 a used for sale

Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor

table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A

Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Key data: 600 mm, 200 mm

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-

Control Heidenhain TNC 355 Spindle diameter Ø 130 mm Horizontal Spindle Travel (W) 800 mm Taper ISO 50 P.D.B. Table 1,600 x 1,800 mm Max. load 12 Ton Cross travel (X) 3,500 mm Vertical travel headstock (Y) 2,000 mm Longitudinal travel (Z) 1,250 mm RPM 5 – 1,100 kW 32 Volts 400 Cycles 50

: 6 St. range L-W-H: 720 x 580 x 800 mm weight: 100 kg : 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray Figure with 8 drawers. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 710 x 510 x 900 mm weight: 52 kg : 5 St. Professional drawer cabinet for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

Packing: ? mm Shipping weight: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 colors flexo central cylinder machine + 1 rotogravure printing machine. Year 1982 but overtaken 1999 Material foil = 20 my – 150 my, paper up to 120 g/m2 Max web width = 1135 mm, Repeat = 300 -800 mm, Diameter unwinder = 1000 mm, (sleeve 76 mm) turnstile. Diameter rewinder = 1000 mm, (sleeve 76 mm) turnstile. Speed 200m/min Tooth pitch 5mm, Accessories: Orbit Observation Track Control = Futec, Oil cylinder system, Printing cylinder = 67 thou x 127 – 112 thou x 22, Air expansion shafts = 7, 7 pneumatic pumps 

Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7919 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1986 Parameters: Rolling force: 12 5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Vacuum sealer Webomatic Supermax Wersktatt, with shelves, 55cbm/h vacuum pump, 2 parallel welding bars, External dimensions LxWxH approx. 78x76x96cm, Inner dimensions approx. 72x52x19cm, good condition, fully functional

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Bread Ribbon Rounding and Long Forming Machine WP Globus U -Bread round and long knitting machine -Werner & Pfleiderer Globus U -with 2 flour shakers -Mobile on castors Dimensions: 180x73x169cm (WxDxH)

tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min : ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 mm weight approx. 50 kg 3 x EPPINGER 4.200.231 drilling and milling head 3 x EPPINGER 4.200.289 drilling/milling head 1 x Drill- Milling head WTO 4 1 06 1 6006 - 40 1 x COROMANT 410 1200 72 - 40 drilling and milling head 1 x 2-jaw chuck KH 1-40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 6000 mm width: 2500 mm height: 2650 mm weight of the machine ca.: 7,5 t 20” workshop container - seaworthy Various equipment - Roof hatch Weight approx. 7.5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. size= 45 x 45 cm, Availability= 062024, numbering-perforating-scoring-slitting-systems Max. Size 45.7cm x45.7cm Min. Size 7.6cm x 12.7cm Paper Weight 45-300gsm Feeder Friction Drive Unit Type Pneumatic Numbering Heads 2 Microprocessor controlled, easy programming Electrical 220V/50Hz/5A Dimensions 1.73×0.69×1.17m Weight app 90 kg LOT Loaded in truck or container

Combined blower oven with two floors and a fermentation chamber Dimensions: 90x150x210cm Electric power: 15kW Capacity: 4 trays x 60x40cm

Baking oven with 4 floors, hood and stand Dimensions: 165x155x215cm Electric power: 10.5kW

Bakery Oven with 4 floors and a fermentation chamber Dimensions: 115x120x200cm Electric power: 42kW Capacity: 2 trays x 60x80cm

Bakery oven with 4 levels and a fermentation chamber Manufacturer: Wiesheu External dimensions: 95x140x210cm Internal dimensions: 60x80cm Capacity: 8 trays (2x4) Electric power: 4.85kW Voltage: 400V 50Hz

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----------------------------------------- Machine will be cleaned and completely checked Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw --------------------------- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ---------------------------- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 32 ...

Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net

tool taper: VDI 40 DIN 69880 number: 22 Stück A range of tool holders in good condition. Tool holder size: VDI 40, DIN 69880 Were used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holder, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Only sold in a package! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SW BA600-2 CNC machining center with swivel table / built in 1999 / Siemens 840C control / incl. chip conveyor, coolant lubricant preparation and extraction

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Offer 24402 Specifications: - Drilling capacity in steel 50 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. – distance: - Spindle – base plate 350 - 1250 mm - Vertical stroke of the boom 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drilling spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Dice table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Cross-cut line Opticut 150 -4 4 ejections built in 2004

Panel length: 3,500 mm Panel width: 1,300 mm Workpiece thickness min: 11 mm Workpiece thickness max: 60 mm Crkikw9B Input length min: 300 mm Cycle time: 200 s Capacity m2/ 8h: 720 High Frequency Press: Yes Power HF generator: 30 kW Gluing unit: Yes Joint gluing press: Yes

- Tool measuring probe RENISHAW TS-23R - Rapid Traverse (X x Y x Z): 36 / 36 / 36 mm/min - Spindle taper: BBT40 - Travel (X x Y x Z): 1.000 x 560 x 600 mm - Number of tool stations: 30 (automatic) - Control: HW F i Series - Max. spindle speed: 12

Motors: no - Pneumatic axes Gripper rotation: Yes together with Z-axis Clamp tilting: No Clamp sprue : Yes Vacuum pupms: 1 Clamp control : Yes Euromap 12 - Stroke (Y): 700 mm - Stroke (X): 100 mm - Stroke (Z): 45-90 mm

plus A-C servo axis only 3 year old, not used payload 5-7 kg with A-C payload 20 kg without A-C - Stroke (Z): 3.500 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Driving method: plus A-C servo axis

- Pneumatic axes - Gripper rotation: 90 ? - Interface: EUROMAP 12 - Stroke (X): 300 mm - Stroke (Y): 1.000 mm - Stroke (Z): 1.500 mm

- B axis: 0 ? -270 ? electric - C axis: 0 ? - 90 ? pneumatic - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Interface: EUROMAP 12 - Compatible machine: up to 350 t - Stroke (X): 900 mm - Stroke (Y): 1.600 mm - Stroke (Z): 3.000 mm - Payload: 5 Kg - Driv

Used machine in good condition. Available for immediate delivery. - Spindle taper: BBT40 - Max. tool length: 300 - Number of tool stations: 30 - Spindle power : 18.5/11 kW - Rapid Traverse (X x Y x Z): 36 x 36 x 36 mm/min - Travel (X x Y x Z): 900 x 460 x 520 mm - Control: FANUC - Max. workpiece weight: 600 kg - Max. spindle speed: 12.000 rpm - Max. tool diameter: 80 mm - Chip extractor: YES - Internal cooling: YES - High pressure pump: 20 Bar - Axes: 3 - Dimensions (long x wide x high): 2.805 x 2.180 x 3.026 mm - Weight: 5.500

- Tooling rotation: 0 ? -90 ? - X axis: 800 mm pneumatic - Y axis: 1000 mm pneumatic - Z axis: 2000 mm three-phase electric with inverter - Interface: Euromap 67 - Compatible machine: up to 150 t - Payload: 3 Kg

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Compatible machine: up to 350 t - Stroke (Z): 3.000 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Payload: 5 Kg - Driving method: 380 volt async

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Weight: 255 kg - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Payload: 10 Kg - Driving method: servo

Buchdeckenrundemaschine - Book cover rounding machine Wilhelm Wolk BDRM Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Zusammentragmaschine / Broschürenfertigung Watkiss - SlimVac Vario 10 Booklet Maker / Brochure Finishing Watkiss - SlimVac Vario 10 Zusammentragmaschine / Gatherer Watkiss SlimVac Vario 10 collator Baujahr / Year 2003 - Serial-No. ASF 1092 Format / Size min. 120 x 160mm Format / Size max. 364 x 520mm Paper weight: 40 to 240 gsm. Geschwindigkeit / Speed 2.500 - 5.000sets/hr. Auslage / Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

A conveyor belt from the company Schöne from Berlin is offered. Technical data: Manufacturer: Schöne Transportbänder GmbH Model: Conveyor belt CNW-5E white FDA Dimensions: 2,100 x 878mm wide, endless, spiral connection V55MO + edge verse The belt is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer

Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Year 1990 - Serial-No. 538 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Year 1986 - Serial-No. 469 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test