w 100 a used for sale

pdf attached

Shared oven Wiesheu EBO 5-124 Year: 2011 -Floor shop oven electric from Wiesheu GmbH -Oven is with 5 floors -each floor 120cm and 40cm deep -Year of construction 2011 -36.35 kW -with IS 600 control -top floor is with own control display -lower floors are each 1 control for 2 floors -Oven is mobile on rolls -Furnace with exhaust hood and vapour condenser

In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008

Used in-store oven Wiesheu B8E2 IS600, for 8 trays 60x40 cm with exhaust hood and proofing cabinet from year of construction 2007. The oven is with fixed water connection for swathing and can be driven on wheels.We have a large selection of in-store ovens in the warehouse to visit at any time. Shipping and trade-in on request. Wiesheu in-store oven -Type: B8 E2 IS 600 -for max. 8 sheets -for 60x40 cm sheets -digital IS600 controller -can be driven on swivel castors -400 V - 50 Hz - 18.4 kW-26.6 A With proofing cabinet GS2_ED60/40_Gärschr._230V50Hz -20 runs for 60x40 cm sheets optionally also 10 runs for 60x80 cm - Dimensions Height: 217 cm Width: 93 cm Depth: 97 cm -Technical data proofing cabinet -Year of construction 2007 -2.1 kW 230 volts 9.1A

Progressing cavity pump Manufacturer: Wangen Type: KL 505S-50.4 Item #: 900,588 Year of construction: 1995 Pressure: 4-10 bar very good condition with plug & on-off button LBH: 2800 x 300 x 320 mm

Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3,2 m -Weight: 3,0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Number: 2x hose package available -Price: per piece -Length: 6.3 m -Weight: 5.4 kg

heavy-duty castors, heavy-duty wheels, tires, forklift drive wheels -Manufacturer: Wicke- Topthane heavy-duty wheel -Wheel size: Ø 230 x 90 mm -Bolt circle: Ø 95/13 mm -Price: per piece -Quantity: 2 pieces -Weight: 7.5 kg/piece

Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg

Control cabinet and distribution board, busbars, busbar supports, busbar adapters -Wöhner item no.: 01 508 -Rated current: 690 V/630 A -Quantity: 16 pieces available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/25/H50 mm -Weight: 0.2 kg/piece

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Transport frame wheels defective, see picture -Motor: 2.8 kW -Vibrating bottle: length 360 mm -Hose length: 5 m -Dimensions: 1150/520/H690 mm -Weight: 116 kg

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens -Pump: 440 V 0.105 kW -Number: 1 x pumps available -Price: per piece -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.

pressure: 25 t stroke: mm table surface area: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: WP Capacity: 25 T Distance between columns: 760 mm Distance between cylinder and table: 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg

Gear motor, electric motor, three-phase motor -Speed: 22 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP54 -Construction: B5 angle -Dimensions: 325/240/H155 mm -Weight: 9.8 kg

Roll-out machine Kombi WLS Jewel Model: 16 CW for all doughs for rolling out and touring Infinitely variable roller adjustment Pull-out table left and right Active pressure plate with manual adjustment with long roller / long knitter below with tow for wrapped products Dough roll-out machine can be driven with locking device With flour container Connection 400V, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center.

turning diameter over bed: 1100 mm turning diameter over slide rest: 780 mm turning length: 4100 mm Control: Siemens type: 840 D bed width: 710 mm faceplate: 1000 mm turning speeds: 1110 U/min total power requirement: 4,79-69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Wabco Westinghouse, compact cylinders -Stroke travel: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

Bezel, steady rest, lynette -steady rest: from lathe WMW DLZ 800 -Max. Passage: Ø 260 mm -Tip height: 495 mm -Technical drawing: in the photos -Dimensions: 670/130 / H785 mm -Weight: 98 kg

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, swivel castor, track roller, pallet truck rollers -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 80 mm -Inside: Ø approx. 20.3 mm -Price per piece -Quantity: 1 piece -Weight: 1.4kg

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 85 mm -Inside: Ø approx. 11 mm -Price: per piece -Number: 3 piece -Weight: 1.5 kg/piece

Moving bezel, bezel, setting stick, lynette -Bezel. Moving, from WMW DLZ 800 lathe -Max. passage: Ø 210 mm -Technical drawing: see photos -Dimensions: 440/430/H700 mm -Weight: 66 kg

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...

Weipert Crankshaft Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 4300 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Manufacturer: WMW, collets, 12 pieces, with plastic box -Sizes: Ø 3-18 mm, see photos -Sale/Price: complete -Box dimensions: 260/330/H80 mm -Weight: 2.2 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -wöhner: QCB NH00 160A switch disconnector -Price: per piece -Number: 2 pieces -Dimensions: 200/110/80 mm -Weight: 1.2 kg/piece

Synchronous motor, MAC117D-0-FS-4-C/130-B-1/WI522LV, R911232504, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The synchronous motor was completely reconditioned by Bosch Rexroth and is therefore in mint condition. - Synchronous motor, permanent magnet motor - 600 V / 3 pol. - 4000 rpm - 23 Nm - 53,2 A - 29 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Synchronous motor, MAC071C-0-US-4-C/095-A-2/WI517LV, Rexroth, refurbished-mint condition, R911247491, Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Synchronous motor, permanent magnet motor - 600 V - 2000 rpm - 10 Nm - 12 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg

Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.

Westfalia MSD 60-06-076 | Clarifier | Y.O.M 1992 | Max Output : 30,000 L/H Condition : Good & Complete Tools Controls Manuals Contact us for more information

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch -Manufacturer: Weidmüller, surge protection switch -Type: PU 1+1 C Class II -Number: 6 pieces available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg

New Tesla experimental set from Wassermatix

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece