w 100 a used for sale

Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Woodward / Wärtsilä LinkNet 6 CHANNEL 4-20 mH INPUT in original packaging ! See photos !

Shared oven Quail Piccolo I-2 - Electric shared oven with steam function - 2 floors each 60x80 with visible glass - with digital strain gauge control - each floor with upper and lower heat separately adjustable - each floor with its own steam box for steam - with program memory -can be driven on castors - Floor entrance height: 16.5cm -Height of castors adjustable -Year of construction 12 / 2006 -Electrical power supply: 9.6 kW External dimensions: Width: 97cm Depth: 144cm Height: 169cm (adjustable)

Shared oven Quail Mini Piccolo 4 Floor oven Quail Mini Piccolo 4 electric with 4 floors each 60x40cm with steam function for each floor separately. The oven is immediately available for sale in the warehouse with fermentation chamber and exhaust air hood including vapour condenser. Inspection of test baking and delivery possible. - 4 floors for 4x sheets 60x40cm - with guest cabinet - with hood incl. capacitor - DMS 3 Master Timer control - Upper and lower heat separately adjustable - Power: 16.5 kW - 400V / AC /3Ph / N / PE / 50 Hz -Floor entrance height 14cm -Year of construction 08 / 2007 Dimensions: Height: approx. 210 cm Width: approx. 98 cm Depth: approx. 100 cm

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1950 kg Total power requirement: 13,5 / 17,5 kW kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1650 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 50 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

Cooling cell with quail cooling motor Year of construction 2011 Coolant: R134a 2207 Height: 250cm Width: 90cm depth: 225cm

Quail shared shop oven Type: Piccolo II-6 Floor 120x80cm DMS 3 Master Control Year of construction 2005 Electric oven 50.4kW with hood Height: 235cm Width: 155cm Depth: 130cm

Expanded In rotating condition due to new motorization wirt sold and pictured

Motor output: 3 kW Filter capacity: 6 m² : 3500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 870 kg Motor output: 15 kW : 12,500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048

Cutting height: 145 mm weight of the machine ca.: 480 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 8500 m³/h Motor output: 11 kW Filter capacity: 47 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor output: 7,5 kW Weight: 450 kg : 6500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

output: 18,5 kw number of blades: 28 Weight: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mm Total pressure: 400 to weight of the machine ca.: 12000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 280 kg Motor output: 4 kW : 4000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MW MEAN WELL fdsfged

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: 125 liter fuel tank capacity; Water Tank Volume [l]: 125

WIMAG coil scissor gripper type SG 3 - 1.1, load capacity 3000 kg, coil outer diameter 1,100mm, coil height 800 mm, weight 582 kg

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

0: 10000 kg height of stroke: 130 mm Total height: 290 mm weight: 21 kg dimensions: 190 x 260 x 290 mm Hydraulic machine jack Foot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/Pu fork arm (length x width x thickness): 1150 x 155 x 50 mm weight of the machine ca.: 0,068 t dimensions: 1,5 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5000 kg height of stroke: 120 mm Total height: 243 mm weight: 15 kg dimensions: 170 x 230 x 250 m Hydraulic machine jack Foot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 900 mm table width: 600 mm table height: 700 mm groove width: mm : mm weight of the machine ca.: 90 Kg dimensions: 0,9 x 0,6 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 400 mm Cutting height: 200 mm cutting width: 350 mm Motor output: 1,5 kW Table dimensions: 400 x 500 mm Table tiltable: 45 Grad saw band length: 2950 mm machine weight ab.: 150 kg Dimensions (L/W/H): 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a saw band. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

Used dough portioner W&P KEMPER, Type: Relaxer S - Dough strand length: up to 850 mm - Dough string size: H 110 x W 165 x L 850 mm - Power: 4 strands per minute (240 pcs/h) - TA 50 - 80% (50-80ml water on 1kg flour) - Hopper capacity: approx. 160 kg dough - Funnel size: L 720 x W 600 mm - Dimensions: 1.830 x 750 x H 1.500mm - refurbished, excellent condition - Warranty: 6 months The machine has been completely overhauled and is in excellent condition. Viewing and test run are possible by arrangement.

Table dimensions: . mm Motor output: 9 kW Spindle diameter: . mm reus: U/min Weight: kg Year: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VSA 38 L Feeder Feeder VSA 38 L 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz 2-stage gearbox Weight 85kg G&STÜ-5114500

I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.

VSA 38 TB Feeder 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz projection 1050mm Suspension travel of the castors 25mm 2-stage gearbox Weight 65kg G&STÜ-5114501

Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available

Gebr. Confectioner's oven Quail Mini Piccolo 4 ECO, overhauled, 4 floors for sheets 60 x 40 cm, on stone, stove height 14 cm, DMS 3 Master Timer, with cooking chamber, Fabr.-Nr. 19486, 17.8 kW, 400 V, 50 Hz