w 100 a used for sale

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Used centrifuge (with base) Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: ST52-3N Weight: 5600 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 11,500 kg not ready for operation (major overhaul extra charge!)

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 14.000 kg not ready for operation (major overhaul extra charge!)

Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!)

ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg overhauled, ready to use

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating Tubs No 2/3/4: in good condition Coating Tub No 1: used Motor 7,4 kW New electrical panel: starting by electronic variator Concrete base 2 exits at the front Voltage 380 V Dimensions (L x W x H) 2500 x 2100 x 1200 mm Weight approx. 3 T MACHINE IN OUR STOCK IN FRANCE.

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available

MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50

Used centrifuge Performance speed: 2200 rpm Drum diameter: 900 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg Maximum operating temperature: 50°C Maximum operating pressure: 1 bar not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg not ready for operation (major overhaul extra charge!)

Used centrifuge semi mobile (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 19.400 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1120 mm Drum wall thickness: 23 mm Drum material: 1.7382 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 22,000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Drive motor: 11 kW Type hydraulic: Replacement C11 - 40Z Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: 1.4571 Max. Density: 1.5 kg / dm³ Weight: 7200 kg completely overhauled, Stainless steel, ready for use

Compressor Worthington in very good condition, incl. dryer Description in the annex!

Used centrifuge Semimobil (with base) Hydraulic: B/C 55-180 KE Speed performance: 1130/RPM Drum diameter: 1120 mm Drum wall thickness: 20 mm Drum material: ST52-3N Weight: 17,000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Speed performance: 3040 U/min Drum diameter: 552 mm Drum wall thickness: 12 mm Drum material: StE 460 Max. Density: 1.3 kg / dm³ Max. Item material temperature: 10 - 50°C Weight: approx. 5220 kg not ready for operation (major overhaul extra charge!)

Marine Gear boxes Ratio 5.042:1 551kw@1800

Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...

Marine gear box Reintjes Model WAF 340 Ratio 4:1

Wohlenberg VARIO S perfectbinder Technical Details No. 82298 Year: 1988 Size: max- 305 x 460 mm min- 105 x 140 mm Ticknes: max- 60 mm min- 2 mm Open size: max- 655 x 470 mm min- 210 x 140 mm Speed: 7000 tact/h Equipment: 26 clamps, central adjustment for clamps ect Additional Information Typ: Wohlenberg Year of man. 1988 Condition: very good Available: immediately Description Wohlenberg 460 gathering machine Format: max- 320 x 460 mm min 70 x 105 mm Speed: 7000 tact/h, 16 automatic stations Wohlenberg trimmer 44 FM Uncuted size: max - 315 x 460 mm Cuted size: max 300 x 440 mm min- 70 x 80 mm Speed: max - 3000 tact/h min - 1200 tact/h Wohlenberg ZS 12 (booklet stacker) Size: max 410 x 10 mm min 145 x 90 mm Ticknes: max 60 mm min 5 mm Speed: 12.000 tact/h

MAsson gear Box Marine W 8000 C Ratio 1.98:1 power 1410 KW @1000 rpm Building year 2005 low hours

Cylinder head for Wärtsilä 22/26 Reconditioned, ready for dispatch. Info by request. Part no: 120020 Drwg. No: 0V12A82

32 solid single flails

Various vibrating pans, sorting and feeding units, etc.

3-spindle line boring machine

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE WARTSILA DIESEL 16V25 ENGINES AT OUR STOCK. ENGINES ARE IN GOOD WORKING CONDATION. ENGINE CRANK SHAFTS HAS STANDART SIZE HARD MARKING ON IT. ENGINES READY TO INSPECTION AND READY TO TRANSPORT. PLS FIND ENGINES DETAILS ON BELOW TYPE 16V25 ENGINE SERIAL NO. 4062 & 4063 POWER 3230kW RATED SPEED 900 RPM RUNNING HRS 27402 & 24816 YOB 1997 IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration machine in mint cond ...

HWS 720 K Tilting circular saws Electric motor with direct drive Saw blade diameter: 700 mm Speed: 1400 1/min 400V 50 Hz Working height: 850-1150 mm Rocker pad: 735 mm Dimensions: 1270 x 730 x 1130 mm Weight: 100kg G & PIECES 5965721

Liquid pumps, sold as mixed lots of approx. 10 tons. Various capacities and brands

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL

TO WHOM IT MAY CONCERN; WE'VE 2 PCS COMPLETE WARTSILA 8L 38B ENGINES AT OUR STOCK ENGINES WERE USED AS PROPOLSUION ENGINES AT PAST TENSE PLS FIND ENGINES DETAILS ON BELOW. ENGINES USE HFO DURING RUNN?NG ENGINES CRANK SHAFTS HAS STANDART SIZE CLASS HARD STAMPS ON IT . YEAR OF BUILT 2006 TYPE 8L 38B ROTATION CW & CCW kW 5000 RPM 520 ENGINES NO. PAAE027120 & PAAE027119 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Watson Marlow 323S/D Peristaltic Pump Factory price 9890 The 323 Series pumps feature a chemical-resistant ABS top and IP31 protection, as well as a membrane keypad to control the pump and a digital LCD to display the speed. 323S High Performance Pumps with Manual Control Universal pump for precise dosing or transfer tasks Flow range: 0.1-2000mL/min. Speed range: 3 to 400 rpm (adjustable in 1 rpm increments) Display Type: LCD Reversible yes The 323 Series pumps feature a chemical-resistant ABS top and IP31 protection, as well as a membrane keypad to control the pump and a digital LCD to display the speed. Dimensions (L x W x H) 230 x 230 x 132 mm Condition: used You can find more laboratory equipment - new and used - in our shop! International shipping costs on request!

Now available: NEW Wartsila 8 cylinder L20 crankshaft available from stock (ex Warehouse Bengi NL) Class certificate Price upon request

Now available: Wartsila 8 cylinder L32 crankshaft RECON All main journals ground to -1,00 mm undersize, crankpins to remain standard size with counterweights with drive gear with Class certificate (DNV) Available from stock (ex. Warehouse Bengi NL) Price upon request

our Ruvac WAU1001 roots vacuum pump is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty After refurbishing, our LEYBOLD RUVAC WAU1001 roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.

Crankshaft

Hammer mill Fa. Wery

Dimensions and weights Length approx. 2200 mm Width/depth approx. 1330 mm Height approx. 1300 mm Weight approx. 362 kg Dressing Dressing table width 260 mm Dressing table length 1120 mm Chip removal max. 4 mm Suction connection Extraction nozzle diameter milling machine 100 mm Suction nozzle diameter saw blade guard 30 mm Suction nozzle diameter thickness 100 mm Thickness Table length 545 mm Table width 258 mm Working height min. 5 mm Working height max. 225 mm Chip removal max. 4 mm Electrical Data Saw input power 2.2 kW Input power planer 2.2 kW Input power table milling machine 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Milling spindle Mandrel diameter 30 mm Effective length 105 mm Height adjustment 110 mm Speed(s) 1400/4000/6000/9000 rpm(s) Milling tool diameter max. non-lowerable 160 mm Noise emission Sound pressure level no-load 80 dB(A)  ...

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.