w 100 a used for sale

Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Hours : 138000 h

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

grinding length: 1000 mm grinding width: 750 mm workpiece height: 700 mm Control: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mm table height over floor: 1000 mm table speeds: 3.000 - 30.000 mm/min cross feed of table continual: 5 - 5.000 mm/min cross feed of table intermittent: 0,1 - 65,0 mm vertical adjustment, 1 graduation: 0,002 mm rapid traverse vertical: 0,25 m/min grinding spindle speed: 50 - 2.500 U/min grinding wheel size: ø 400 x 50 x ø 127 mm workpiece weight: max. 1.000 kg table load: max. 1600 kg total power requirement: 33,2 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of Log ...

ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for the highest performance. This range includes all the main characteristics of RF ranges in terms of efficiency, Power factor, ventilation, internal structure (dedicated 3 compartments) and general flexibility. An integrated digital interface with OLED display and integrated USB enables the best and easiest overview/setting of charging parameters, diagnostic and data reports. Main features AC mains voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Setting Type: OLED Display: Current, Capacity and 7 pre-set Charging Characteristics Through PC laptop/USB port: advanced programming Data storage: report on the last 50 charges and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heat sink ...

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

General SKU396U1161 LocationBarneveld MakeAzo TypeVB 800 B Year of construction1996 Main Features MaterialStainless steel Volume2000 Ltr. Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity2000Ltr (1000 Ltr. 2x) Diameter1100 mm Conical bottomcheck Flat topcheck With covercheck Manholecheck Outlet with vibro bottomcheck Outlet with valvecheck Information Extra Specificationsequipped with a dosing screw. Brand Azo. Type DFS100x 650. SilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU398U1175 LocationBarneveld MakeAtlas Copco TypeGV 100 Mach.No.1316839 Pressure Working pressure0.0005 Bar Main Features MaterialMild steel Volume105000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck High vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity105 m³/h With motor2,2 kW Information Year of construction2013 Total height0,35 m CEcheck Floorspace0,7x0,5 m Weight70 kgVacuum pumpsAtlas CopcoPumps > Vacuum pumpsBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU398U1169 LocationBarneveld MakeAtlas Copco TypeGV 100 Mach.No.1423888 Pressure Working pressure0.0005 Bar Main Features MaterialMild steel Volume105000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck High vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity105 m³/h With motor2,2 kW Information Year of construction2014 Total height0,35 m CEcheck Floorspace0,7x0,5 m Weight70 kg Extra SpecificationsUNUSEDVacuum pumpsAtlas CopcoPumps > Vacuum pumpsBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU294W555 LocationBarneveld MakeDan-Process A/S TypeHPLC 300 No.H3001000-125 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,30 m Weight300 kg CEcheck Floor space1,0 x 1,0 m ATEX compatiblecheck Extra SpecificationsVolume 71 l. : : Allowable temperature 0-50°C. : : Allowable pressure 100 bar g. : : Test pressure 143 bar g. : : Diameter 125 mm. : : Max bed length 1000 mm : : This column was part of a system together with SKU: 294W550 and 294W554 : : Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

General SKU050C482 LocationBarneveld MakeMAVAG Altendorf No.91.1923 Year of construction1992 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity100 Ltr. Vessel sizesø 600x400mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck (6x) Outletø 20mm With propellor stirrercheck (bottom mounted, magnetic stirrer) Motor1,5 kW 400 V 1450 rpm (Ex) Information Mounted on legscheck (Mounted on wheels) With switchcheck Floorspace1,0 x 0,9 m Total height1,9 m Weight250 kg ATEX compatiblecheckStirring vesselsMavag AltendorfStirring vessels > Stirring vesselsBrand > Mavag Altendorf What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU337T903 LocationBarneveld MakeKMPT process technology TypeHZ 100/1.6 Si No.60000886 Year of construction2007 Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifugesyphon type Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information Mounted on framecheck Total height3,5 m Weight5760 CEcheck Floorspace5,35x4,5 m ATEX compatiblecheckPeeling centrifugesAndritz KMPTCentrifuges > Peeling centrifugesBrand > Andritz KMPT What you can expect from Foeth: -- Machine is in work ...

General SKU294W554 LocationBarneveld MakeDan-Process A/S TypeHPLC 200 No.H2001000-110 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,30 m Weight300 kg CEcheck Floor space1,0 x 1,0 m ATEX compatiblecheck Extra SpecificationsVolume 37 l. allowable temperature 0-50°C. allowable pressure 100 bar g. test pressure 143 bar g. flow rate 120 l/h. Diameter 200 mm, max bed length 1000 mm : this column was part of a system together wit sku: 294W550 and 294W555 Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU294W559 LocationBarneveld MakeDan-Process A/S TypeHPLC 100 No.H1001000-128 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,50 m Weight250 kg CEcheck Floor space0,80 x 0,80 m ATEX compatiblecheck Extra SpecificationsVolume 9 l. allowable temperature 0-50°C allowable pressure 100 bar g test pressure 143 bar g. flow rate 30l/h., Diameter 100 mm. max bed length 1000 mm. inlet and outlet ball valve this column was part of a system together wit sku: 294W545 Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...

Technical data of the pallet rack stand: Shelving system: Dexion Type: S 4 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Type: H Profile dimensions: 81.7 x 77.21 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 11,050 mm high 1,100 mm deep Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

pulling force - max.: 6.3 t max. ram stroke: 1000 mm max. workpiece diameter: 60 mm Control: Siemens 840 D total power requirement: 99 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4 x 5 x 6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

REF-2705 APV GAULIN 15-3.0 B HOMOGENIZER 1000 LITRES/HOUR Manufacturer: APV Brand: Gaulin Model: 15-3.0 B Serial no.: 1-02.452 Year: 2002 Single-stage homogenizer for liquids Overall dimensions (mm): 1,400 x 900 x 1,600 (LxWxH) Capacity: 1,000 l/h Max. temperature: 50 °C Homogenization pressure: 200 bar Electric motor: 11 kW/3x380 V/50 Hz Inlet/outlet connections: 50/65 mm Made of stainless steel, including some AISI 316 components N.B.: This homogenizer can be purchased separately or as part of an APV complete pasteurization system for fish broth also advertised on this site.

General SKU412W1302 MakeHosokawa Alpine Type100AFG No.13576/1 Year of construction1988 Main Features Vacuumcheck Specified Features - Jet Mill Grindercheck Grinding room sizeDia 100mm With hoppercheck InletDN40 Feeding with rotating valvecheck K-Tron S 200 Motor0,25kW, 380V Speed12.000-22.000rpm Jet Mills MaterialStainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Information Mounted on framecheck LocationBarneveld With switchgearcheck Floor space2x1,2 m Total height1,9 m Weight600 kg Extra Specificationsdata fluidized bed counter jet mill with classifier:grinding chamber diameter: 100mmnozzle diameter: 3x 1.9mmgrinding air flow rate 50-60m³/hfilling quantity molen: 0,8lspeed classifier: 2200-22.000rpmclassifying wheel dia: 50mmfines discharge Ø: 20 mmmotor: 1kW, 220V cyclone data:alpine cyclone GAZ140cyclone diameter: 140mm filter data:alpine filter k ...

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

This 4-axis AWEA AF-1000 vertical machining center was manufactured in 2017. It features a 1020 mm X-axis travel, 550 mm Y-axis travel, and 635 mm Z-axis travel. Equipped with a high-speed 12,000 rpm spindle, ISO 40 taper, and a 24-tool arm changer. Includes a 4-axis continuous table and chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine.

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€.

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine.

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

Ref. no.: 17540 Manufacturer: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBUR ...

General SKU397X1153 MakeEaton LocationBarneveld CEcheck TypeVMDE-0402-AC10-100DX-22SEN-M Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume85 Ltr. Surface0.16 m2 Specified Features - Candle filter Candle filtercheck Filter surface± 0,4 m² (1,6 m ²) Number of candles4 Candle sizesø 200 x 659 Cake capacity185 l. Liquid outletDN100 Max. temperature— 10 / 160 °C Top connectionsDN100 Vessel sizesø 550 x 800 mm MaterialStainless steel 1.4571 (316Ti) Candle filters Capacity185 l. Max. temperature-10°C/+160°C Number of bags4 Information No.V1586.3 Year of construction2017 Mounted on legscheck Weight220 kgCandle filtersEatonFilters > Candle filtersBrand > Eaton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU343T928 MakeAlexanderwerk LocationBarneveld CEcheck TypeG 1/100 Main Features Motor4 KW Specified Features - Roll compactor MaterialStainless steel 1.4401 (316) Roll compactors Granulatorcheck Roll sizesdia. 190x170 mm Number of dies available:1 Die perforation2 mm Number of press rolls1 Motor4,0 kW 230/400 Volt (Ex) With pre-mixercheck With motor0,37 kW With variable speed drive4,2-21 RPM Inlet440x380 mm Outletdia. 100 mm Information No.05132198 Year of construction2001 Mounted on framecheck With switchgearcheck Floorspace1,2x1,2 m Total height2,2 m Weight820 kg ATEX compatiblecheckRoll compactorsAlexanderwerkCompactors > Roll compactorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

Injection moulding machine Arburg 420C 1000-290 BJ 2007

Two pcs turbocharger cartridge for 3516 industrial engines part number 177-1009 /. 0R9809 Perfect machinery international bv + 31 78. 6158040 or whatsapp + 653549259

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

General SKU254S226 LocationBarneveld MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel Information Year of constructionUnknown Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is). MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200  ...

A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

IXION AUERBACH TL 1004 deep hole drilling machine was built in 2004 in Germany by Ixion Auerbach Maschinenfabrik GmbH. The machine is designed for precision drilling of deep holes with a maximum depth of 1000 mm. Workpieces made of various types of material are machined fully automatically by means of precisely guided tools, which keeps the hole perfectly straight. All machining parameters are programmed in an advanced control system with many useful functions. The offer also includes an extensive equipment, consisting of, among others, a measuring probe, gun drills and a chip conveyor. The IXION TL1004 deep hole drilling machine weighs 3500 kg. Technical specifications of the IXION AUERBACH TL 1004 deep hole drilling machine - maximum drilling depth: 1000 mm - maximum hole diameter: 32 mm - minimum hole diameter: 6 mm - drilling capacity in 1.2312 steel (carbide gun drill): fi 25 ...

This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details.

weight max.: 1000 kg workpiece length: . mm work piece width: . mm Drive: elektr. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,1x2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load capacity 1000 kg Total height B – 260 cm Free space under the boom – 230 cm Column height – 250 cm Flange – Diameter 61.5 cm Hole pattern – 53 cm, 8 holes, diameter 30 mm Boom A – 300 cm I-profile 300 Flange width – 15 cm Rotation range – 270° Crane with Abus electric chain hoist and manual chassis Total weight – 500 kg Colour – RAL 6018 Year of manufacture – 1992 – after overhaul – Documentation

An Arburg plastic granulate dryer with integrated material conveying is available. Hopper volume: 100l, max. drying temperature: 150°C, heating capacity: 4.5kW, air capacity: 90m³/h, conveying height: approx. 3000mm, machine dimensions X/Y/Z: approx. 950mm/600mm/2000mm, weight: approx. 150kg. An on-site inspection is possible.

General SKU223Y099 LocationBarneveld MakeAlpine Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck Jet Mills MaterialStainless steel 1.4541 (321) Magento base g_extra_specificationsWith filter (mounted on wheels) and a red metal crate filled with many spare parts. Information TypeAFG-100 Year of construction1985 Mounted on wheelscheck With switchgearcheck Floor space1,70 x 1,10 m Total height2,40 m Extra Specifications With K-Tron dosing screw, type T20A, 0.25 kW: Becker vacuum pump: Alpine stainless steel filter, type K6R, 2.4 m²: with spare rotors and parts:Jet MillsAlpineMills > Jet MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working con ...

type ABUS VS - 1000/5,0 (406) Overall height 3.65 m Lower edge height 3.30 m Column diameter stlpa 406 mm Projection 5,000 [mm] Hook travel 2,900 [mm] Btto 941 [kg] Swivel 360 [°] Chain hoist ABUS GM 3, lifting speed 1/4 m/ min, cat motor. Powered Original crane book with inspections Last test 2025 new paint job Column RAL 7038 light grey Boom RAL 1007 - daffodil yellow current price - new 10.580 eur -without packaging, transport and VAT. - Pictures - original condition before overhaul

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Afriso, capsule pressure gauge, unused OVP -Type: KP100 0/100 mbar -Art.-No.: 35119301 -Screw connection: G1/2B rad. -Number: 3x manometers available -Price: per piece -Dimension box: 140/110/H55 mm -Weight: 0.5 kg/piece

Container turning device, welding turning device, roller block, rotators, pipe straightening system -Roll diameter: O 160 mm -Electronic drive: adjustable -Manufacturer: APS Typ -Load capacity: max approx. 3000 kg -Speed: min. 80 mm / min -Speed: max. 2000 mm / min -Foot switch -Admission of pipes to be welded min .: O 250 mm -Acceptance of pipes to be welded max .: O 2000 mm -Laterally adjustable castors: 400 mm - 805 mm -Counter bearing length adjustable on: Rail system -Transport dimensions: 2070/2000 / H1110 mm -Own weight: 1219 kg