w 100 a used for sale

wire diameter 10-16 mm feed legth 100-250 mm pitch 5x dia. output pieces/min 25-50

wire diameter 0,5-2 mm spring diameter 20 mm flange length 80x120 mm working width 90 mm output - pieces/min 70

wire diameter 0,8-3 mm spring diameter 50 mm feeding length 14450 mm output pieces/min 125

wire diameter 0,2-1,8 mm spring diameter 35 mm feeding length 1.500 mm

overhauled wire diameter 2,0-9,0 mm spring diameter 10-120 mm feeding length unlimited output pieces/min 90

wire diameter 0,2-0,9 mm spring diameter 1 - 20 mm feeding length 4 - 1280 mm output pieces/min 11 - 420

wire diameter 0,1-0,5 mm spring diameter 1-5 mm feeding length 1000 mm output - pieces/min 70

for torsion springs wire diameter 0,5-2 mm spring diameter 20 mm output pieces/min 70 spiral length 80 x 120 mm

wire diameter 0,2-0,8 mm spring diameter 20 mm feeding length 3910 mm output pieces/min 220

wire diameter 0,5-6 mm spring diameter 20 mm feeding length  output pieces/min 80

wire diameter 0,2-0,9 mm spring diameter 1 - 20 mm feeding length 4 - 1280 mm output pieces/min 11 - 420

wire diameter 0,5-6 mm spring diameter 20 mm feeding length  output pieces/min 80

wire diameter 0,5-2,5 mm flange length max 80 x 120 output pieces/min 80

wire diameter 1-5 mm feeding length 2400 mm output pieces/min 150

wire diameter 0,8-4,0 mm spring diameter 70 mm feeding length 1500 mm output pieces/min 200

wire diameter 2-10 mm spring diameter 120 mm legth of springs 10 - 240 mm

wire diameter 2,4-4 mm spring diameter 42-55 mm output - pieces/min ca. 32 m

bushing cut-off , PKO diameter range 16 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 160 mm shaft length under head 125 mm output - pieces/min 150

turning diameter: 720 mm turning length: 3000 mm control: Siemens 805 turning diameter over slide: 430 mm turning speeds: 1800 U/min tailstock quill taper MT: 6 steady: 3 Stück main drive motor: 36 kW z-axis: 3050 mm x-axis: 410 mm swing diameter over slide rest: 430 mm spindle motor: 28 kW workpiece weight: 3000 kg spindle passage: 106 mm 3-jaw-chuck diameter: 305 mm chip conveyor: faceplate: mm total power requirement: . kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines  ...

Geared motor, electric motor, electric geared motor, aseptic motor -Manufacturer: SEW-Eurodrive, geared motor aseptic motor type WAF30 DAS80K4/TF/IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm, built-in shaft Ø 15 x 30 mm -Flange: Ø 120 mm -Recess: Ø 80 mm Protection rating: IP66 -Number: 2x geared motors available Price: per piece -Dimensions: 385/150/H210 mm -Weight: 14 kg/pc.

Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg

Reflective light barrier, light barrier, reflection light scanner, reflex scanner -Manufacturer: Wenglor, reflex sensor with background suppression unused OVP -Type: HN55PA3 -Scanning range: 500 mm -Supply voltage: 10 ... 30 V -Number: 5x buttons available -Price: per piece -Dimensions: 100/55/H30 mm -Weight: 0.1 kg/piece

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm -Weight: 284 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2240/760/H520 mm -Weight: 278 kg

Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers, isolation converters, signal converters -Manufacturer: Weidmüller, Signal converter 8795890000 -Type: WAS5 PRO Bridge -Price: per piece -Quantity: 9 pieces -Dimensions: 95/15/H110 mm -Weight: 0.1 kg/piece

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Walter & Sohn, frequency converter from the BRANDT KM 35 edge banding machine -Type: 501921522 / FU5 / 6 / 132LJD / 60 -Input: 380 V 50 Hz -Output: 220 V 200 Hz -Power: 5 KVA -Protection class: IP54 -Dimensions: 510/325 / H260 mm -Weight: 63 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63/86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / Thread Ø28 x 25 mm -Cylinder: outer Ø 75 mm -Mounting: Bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 370/140/H145 mm -Weight: 11 kg/pc.

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Sliding support, linear drive, clamping plate, unit carrier, milled surface, welding table, welding table -Spare part of: a Wotan table boring machine -compatible with: clamping plate ID 21339 -Width at the top: 80 mm -Width at the bottom: 270 mm -Length: 2200 mm -Height: 215 mm -Number: 2x available -Price: complete for both -Transport dimensions: 2200/600 / H300 mm -Weight: 556 kg

Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -teeth of tearing -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 190 kg

Servo motor, electric motor, DC motor -Geared motor comes: from a plasma cutting machine -Manufacturer: SATO -Type: SATRONIK -Max. Speed: 3000/96 rpm -Power: 0.21 kW -Torque motor: Nm -Shaft: Ø mm -Construction: B5 -Gearbox manufacturer: alpha Getriebebau -Type: TP 010-MF2-31 -Translation: 1:31 -Dimensions: 380/118/H130 mm -Weight: 7.5 kg

Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR, paint pump -Roles with: Airles technology (without rollers) -Piston pump manufacturer: Wagner -Type: professional scooter -Material volume: max. 1.8 l/min -Max. Pressure: 12 bar -Material temperature: max. 35 °C -Number: 2x pumps available -Price: per piece -Dimensions: 270/145/H225 mm -Weight: 7.1 kg

Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -Design: stable -Drive: electric -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 2150 mm, adjustable -driven: via timing belt -Dimensions: 1600/1750/H2150 mm -Weight: 500 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 31 rpm -Power: 0.37 kW -1x Type: FZOD044S -3x Type: FZOD71N13-4 -Design: B14 -Shaft diameter: 25 mm -Protection class: IP 33 -Number: 2x geared motors available Price: per piece -Dimensions: 380/170/H120 mm -Weight: 15 kg

Automatic drill, drill, plate drill, row drill -Automatic drill: for advertising signs -Spindle mount: 12 mm (can be changed according to customer requirements) -Automatic drilling -Table size: 1200 x 1000 mm -Spindle stroke: 200 mm -Speed: 2800 rpm -Feed: via gear -pneumatic workpiece clamping -Pneumatic workpiece ejection -Dimensions: 1360/1520/H2180 mm -Weight: 450 kg