135,939 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
VWS Nederland – Top/Base Labeling Machine (R → L), Manufacturer: VWS Nederland, Type: Top / Base Labeling Machine (Right → Left), Year of manufacture: 2017, Description, The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines., This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required., Technical Specifications, - Manufacturer: VWS Nederland, - Machine type: Top and bottom labeling machine, - Labeling direction: Right → Left (R → L), - Label positions: Top and base (bottom), - Year of manufacture: 2017, - Application: Automatic labeling of trays, containers, and packaged products, - Integra ...
Used autoclave made by the German company VWR model Vapour Line80-B. New: 2016. Technical specifications: - Chamber capacity: 90 L - Operating temperature: 138 °C - Pressure: 2.8 bar - Chamber diameter: 410 mm - Motor power: 3 kW - Length × width × height: 740.0 × 915.0 × 606.0 - Weight: 165 kg In very good condition with full documentation, all valid UDT inspections, equipped with 2 baskets, an external condensate container and gloves. Does not require direct access to the mains water supply. Medium: demineralised water.
x-travel: 2000 mm y-travel: 1500 mm z-axis: 3000 mm W-axis (spindle longitudinal): mm spindle diameter: 100 mm table surface area: 1.400 x 1.300 mm table load: t spindle turning speed range: U/min power capacity - milling spindle: kW tool taper: MK | dimensions: 6,4 x 3,2 x 3,4 m weight of the machine ca.: 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Connecting shaft ZIMM - Austria VWZ - 60 - LA 1680 ( VWZ-60-LA1680 ) Shaft: Ø 60 mm Length: 1680 mm Bore: Ø 14 mm New ! Dimensions: 1680 x 60 x 60 mm
Vaillant aroTHERM VWL 85/3 A230V Auction-ID: A7-49228-1011
No power cord present. Auction-ID: A1-41279-613
Including 2x Integra Pipetboy 2 Auction-ID: A1-49790-1009
Including 1x Severin microwave Auction-ID: A1-49790-1444
Including 2x Integra Pipetboy 2 Auction-ID: A1-49818-1009
Including 1x Severin microwave Auction-ID: A1-49818-1444
Packed per 12 a box, on and including 1 pallet Auction-ID: A1-48959-729
Packed in 10x box, on and including 1x pallet Auction-ID: A1-48959-737
Mains choke Manufacturer: Schneider Type: VW3A4565 NEW and fully functional. From stock. For more details, see pictures.
Cooling Unit Cooling Water Recirculating Cooler ARO Type VWK 31/1-SFabr. No. 0705384 year of construction 2007Cooling capacity 3500 wattsAmbient temperature max. 32CRefrigerant R407CCrefrigerant Capacity 0.98 kgOperating overpressure Refrigeration compressor max. 29.5 barWater tank capacity approx. 8 litresFlow volume Circulating pump 27 litres/min. (1620 litres/h)Water connections Quick-release coupling Rectus Type 26Mains connection 230 volts, 50 Hz, 2.2 kW- temperature setting via DANFOSS thermostat controller- built-in circulation pump (250
adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöberi type R47/VW3-1028-S170-220-4 -Engine manufacturer: Loher type ABCA-100LB-04C -Engine power: 2.2 kW 1405 rpm -Speed range adjustable: 12-70 rpm -Hollow shaft: Ø40 x 160 mm -Dimensions: 880/270/H310mm -Weight: 88 kg
Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, Crane control resistor unit, original packaging -Type: Dematic VWID2-B00 -Item No.: 52896484 -Cardboard dimensions: 135/85/H40 mm -Weight: 0.1 kg
Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg
Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use
Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation
A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.
-Fully hermethic motor compressor -Mech. Thermostat Cooling Capacity: 0.8kW Voltage: 230V/50Hz Pump power: 0.12kW Water tank: 6l
maximum number of results exceeded
please refine your search
1.800 € 
