vt used for sale

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Handover/Price: in current condition as viewed -Gearbox housing: Damage see photos -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, its ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information.

Horizontal turning machine manufactured in 2019. This Victor Vturn-NP20 was moderately used, with only 3,000 real operating hours, and is in very good technical condition. It features a standard turning diameter of 206 mm and a bar capacity of 52 mm, making it suitable for machining small and medium-sized parts. Consider the opportunity to buy this Victor Vturn-NP20 horizontal turning machine. Contact us for further details.

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

This EMAG VTC 250 was manufactured in 2013. It features a chuck diameter of 250 mm and can handle workpieces up to 140 mm in diameter. The machine offers an X-axis travel of 300 mm and a Z-axis travel of 740 mm. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

This EMAG VTC 250 was manufactured in 2015. A vertical turning machine featuring a chuck diameter of 250 mm and maximum workpiece diameter of 140 mm. Axis travel includes 300 mm on the X-axis and 740 mm on the Z-axis. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.

VACUUM MASSAGE AND SALTING MACHINE, SUHNER AG TYPE: VT1500E Technical description: Power supply: 380-440V/50-60 Hz Machine No: 931 500 247 Power: 4,7 Kw Dimensions: 1900 x 1500 x 1900 mm

General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180°C Number of compartments:1 Capacity45 l Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 kW, 230 V Number of doors:1 MaterialAluminium General With switchcheck Floorspace0,6x0,7 m Total height0,5 m Weight50 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyAnimal feedOther feedConfectioneryDrying ovensSolid pharmaceuticsDyes & pigmentsBiopharmaceu ...

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU316W639 LocationBarneveld CEcheck MakeBecker Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity250 m³/h With motor5.5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm MaterialStainless steel General TypeVTLF 250 Mach.No.1563199 Year of construction1999 Floorspace1,10 x 0,65 m Total height0,70 m Weight350 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchVacuum pumpsOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmace ...

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

Manufacturer: Opelka Model: MB 50 VTEI Year of Manufacture: 2016 Machine Type : Deep Fryer Power: 9 kW Voltage: 3 x 230V Oil / fat tank capacity: 52 litres Weight: 220 kg Dimensions (L x W x H): 1200 x 900 x 1650 mm Construction: Stainless steel, on castors Find more here - .ucymachines/ Contact us at - sales@ucymachines

Schuster VTM 350 Year of manufacture 2005 see pdf on the for specifictions The machine is in working, good condition The 2005 Schuster VTM 350 is a vertical turning lathe designed for precision machining of medium-sized components. This machine integrates advanced features to enhance productivity and accuracy in various industrial applications. Key Specifications: - Maximum Turning Diameter: 200 mm - Maximum Workpiece Height: 350 mm - X-Axis Travel: 200 mm - Z-Axis Travel: 400 mm - Spindle Speed: Up to 8,000 rpm - Tool Turrets: Two turrets, each accommodating 12 tools - Spindle Motor Power: 20 kW - Machine Dimensions (L x W x H): 3,000 mm x 1,700 mm x 3,350 mm - Machine Weight: Approximately 6,000 kg Features: - CNC Control System: Equipped with the Rexroth Indramat System 200 BTV 20, providing precise control over machining operations. - Stepless Feed Rates: Allows feed rates up ...

Rotational arm mixer ARTOFEX, Sold with 1 tank of 600 liters, about 400 liters usable, Mixing arm: 3, Tank dimensions (mm): Diameter: 1135 H 600 mm , Tank capacity (Liters): 600 Litres , Dimensions (mm): 1850x1200 H 166 mm , Elec: 380 V , Number of tanks: 1, Weight (kg): 1860 Kg

suitable for 5 t excavator

Drum: 300 litres, Tilting height: 1100 mm, Power: 3 x 400V, 50Hz, 2kW, Dimensions: 1600 x 1450 x 2000 mm

General SKU098F495 LocationBarneveld MakeProvatech GmbH (Waldner) TypeVakuum Trockenschrank VTP 700/930 :Ex: Pressure Working pressure0.025 Bar Vacuum possiblecheck Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume260 Ltr. Surface1 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing(1.4571) Stainless steel traysMirror polished Heating surface1,0 m² Drying chamber capacity260 Ltr Drying chamber sizes700x445x930mm Max. temperature80°C. With jacket27 Ltr. Max. temperature80°C. Number of trays4 (+ bottom) Tray sizes500x400mm Distance between the trays150mm With 1 door, With electric (water) heating Connection for the vacuum pumpcheck With vacuum pumpmake SIHI Motor± 0,25 KW MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Year of construction1997 With switch(as is) Floorspace1,9x1,2 m Tot ...

A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripher ...

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg

Suitable for lifting two EURO pallets in one stroke, Load capacity 2,000 kg Useful stroke 3,500 mm Connection 400V/ 16A/ 3.0 kW Dimensions 1,500 x 1,800 x 3,700 mm Weight approx. 1,300 kg

4 x Heuft VTR oven All ovens for 2 trolleys 10 tier trays 60x80 Furnace after general overhaul in 2026 Furnace with separate exhaust hood including display with digital control There are 2 rack trolleys per oven each stove is for 2 rack trolleys crosswise with 10 supports 60x80 cm optionally, additional rack trolleys can be purchased I oferiere ofen: With boiler possible 2 boilers in tandem with mounting me all containers With pipes insulation With transport

This 3-axis PORTIC VTEC gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 1,300 mm and a maximum workpiece weight capacity of 8,000 kg. If you are looking to get high-quality milling capabilities, consider the PORTIC VTEC gantry milling machine we have for sale. Contact us for further details.

Sand traps are essential for optimizing your pumping system during well dewatering projects. These robust units efficiently capture sand and other solid particles from the groundwater., , The BBA Pumps sand trap offers more than just filtration. Thanks to its smart design, the unit also functions as an air vent, contributing to a more stable and efficient operation of your system. The fully galvanized settling tank features a special recess for easy integration of a Handy water meter, enabling accurate monitoring immediately., , Equipped as standard with forklift pockets, safety grilles, and logo panels, this sand trap is designed with ease of use and safety in mind. Furthermore, the unit is perfectly stackable with our mobile pumps, making transport and storage efficient and organized., , Applications:, Well dewatering, Soil drilling, Horizontal drainage, Water metering, , Suitable for  ...

This HWACHEON VT550R was manufactured in 2008. It features a hydraulic chuck diameter of 500 mm, a maximum turning diameter of 650 mm, and a spindle speed up to 1,500 RPM. The machine includes a 12-position turret and a chip conveyor, ensuring efficient operation. Consider the opportunity to buy this HWACHEON VT550R turn-mill centre. Contact us for more information about this machine.

Year of manufacture: 2026, Connector size: 4 Cardan, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible.

- X Stroke 1835 mm - Z Stroke 1000 mm - Table load 20 Ton - Ram size 230 x 230 mm   - Stroke crossrail 800 mm  - Stroke crossrail in 5 steps each 200 mm - Live tools 2000 Rpm - Power live tools 15 kW - ATC 18 station max L = 450 mm - Taper BT50 BIG PLUS - Full C-Axis 360.000   - Under power in AEROSPACE precision plant - 2020 Table bearing replaced - 2020 Ram bearing replaced - 2025 new chip conveyor

VTT Sand Trap, VTT sand traps optimize your pumping system during well dewatering projects. They capture and separate sand carried along with the groundwater, while simultaneously acting as an air vent for accurate water measurements., , Applications:, , Well dewatering, Horizontal drainage, Construction pit dewatering, Water measurements, pH-neutral water 0 - 45 °C, , Water meter option, The VTT sand trap is prepared as standard for the installation of a 4-inch Handy water meter. This integrated preparation ensures simple and reliable water measurement within your dewatering system., , Max dirt passage: 100 mm, , = More information =, , Year of manufacture: 2026, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer informa ...

1-deck stainless steel vibratory tumbler screen with a screening area of 0.7 m² and a screen diameter of 950 mm. Incl. 1 piece sieve insert (without covering), incl. base frame and drive: 1.1 kW, 230/400 volts, 1,300 rpm. Suitable for dry screening of almost all bulk materials in the fine, medium and coarse grain range as well as for wet screening.

Iron Removal Container – The Efficient Solution for Iron-Free Water!, Are you looking for a reliable and efficient solution to remove iron from your water?, Discover the Straw / Iron Removal Container – a mobile and flexible solution specially designed to improve your water quality, wherever and whenever you need it!, , Why choose our iron removal container?, ✅ Plug & Play system, Easy installation saves time and effort with a user-friendly design., ✅ Durable and robust, Made from high-quality materials that can withstand harsh conditions, ideal for your iron removal projects., ✅ Flexible deployment, Suitable for temporary or permanent solutions – perfect for locations without fixed infrastructure., ✅ Cost-saving, Reusable systems and low maintenance costs make this a smart long-term investment., How does it work?, By allowing the water to seep into the container from above ...

VTT Pipe racks ideal for storing all types of pipes and tubes., The frame is fully galvanized., If you have any question dont hesitate to ask them., Dimensions: 4600 x 1160 x 1170, , = More information =, , Year of manufacture: 2026, Colour: Grey, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p ...

Diameter of the table: 3000 mm turning diameter: Max. 5500 mm column travel: 1000 mm table turning speeds: 82 U/min table load: max. 25 t turning height: 2000 mm weight of the machine ca.: 75 t dimensions of the machine ca.: m Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoT ...

x-travel: 1040 mm y-travel: 510 mm z-travel: 640 mm control: Mazatrol type: M Plus Tool changer: 24 Pos. spindle taper: ISO: spindle turning speed range: U/min table surface area: mm Table load: kg spindle power: kW total power requirement: KVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ...

x-travel: 1120 mm y-travel: 510 mm z-travel: 510 mm control: Mazatrol 640 M total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mm y-travel: 510 mm z-travel: 510 mm control: Mazatrol 640M total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU226Y115 MakePerinox Serial05.107.41.1 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume600 Ltr. Surface2.4 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface6x 0,4 m² Drying chamber capacity600 l. Drying chamber sizes500 x 1120 x 680 mm Max. temperature-20°C/+150°C Number of trays6 Tray sizes400 x 1000 mm Distance between the trays100 mm With 1 doorcheck With vacuum pumpcheck Motor5,5 kW, 380 V., 1420 rpm MaterialStainless steel 1.4301 (304) General TypeVTS Year of construction1993 revision 2005 Mounted on framecheck LocationBarneveld With switchgear(as is) Floorspace1,30 x 1,40 m Total height2,10 m Weight1450 kg CEcheck Extra information Extra SpecificationsWith steam heating condenser,  Regloplas temperature control unit, type P140,  Siem ...

General SKU222Y094 MakeAllgaier Serial11486 TypeVTS 600/1 Main Features MaterialStainless steel Surface0.28 m2 Sizes diameter600 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0.28 m² Number of sieve decks:1 Sieve sizesø 600 mm With covercheck Inletø 470 mm Outletø 140 mm Drive vibro motorcheck Motor0,3 kW (380 V, 1460 rpm) Sieve perforation4 mm MaterialStainless steel 1.4571 (316Ti) General Year of construction2011 LocationBarneveld Mounted on stainl. st. framelegs Floor space0,95 x 0,90 m Total height1,45 m Weight220 kg CEcheck Extra information Extra Specificationswith bag dump station Powdered foodsGeneric medicinesTea, herbs & coffeeStarchRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedOther feedCon ...

Ulma VTC 840 Technical Specifications Model: VTC 840 Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 90 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for mono PE film ✅ Motorized film roll holder (max. film width 830mm) ✅ Headspace Vacuum Version (Tigth Bag) ✅ Format tube for bag width 240 & 310mm ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 830mm) ✅ Cross sealing beam with Easy Teflon Change ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt Documentation & Operation Language (documentation & ...

Labeler Manufacturer: NERI Type BL 400 VTEXL Series No. N 3110017 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal 1 vertical labeller for vignettes Label roll min. 40 mm max. 400 mm. Serialization make Systech (product tracking) Printer make Wolke M 600 Incorrect cardboard ejection

Labeler Manufacturer: NERI Type BL 400 VTEXL Series No. N 3110018 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal 1 vertical labeller for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Mettler Toledo YOC 2019 Printer make Wolke M 610 Incorrect cardboard ejection Documents available

Labeler Manufacturer: NERI Type BL 400 VTE Serial No. M.BAA 137.01 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal Label roll min. 40 mm max. 400 mm. Incorrect cardboard ejection Documents available

Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Mint (fully functional) Year of Make: 2025 Capacity: Up to 20 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for laminated film ✅ Machine prepared for MAP ✅ Format tube for bag width 300mm ❌ Label dispenser ✅Videojet 6330 Printer ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Automatic foil centering ✅ Quick-change system for film with vacuum gluing table and knife ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt increasing ✅ Volume pneumatic filler with tank 200 – 300 litres Documentation & Operation Language (documentation & HMI): German (other languages on request)  ...

Labeler Manufacturer: NERI Type BL 400 VTE Serial No. M.BAA 138.01 Labeller for boxes max. 400 pieces/min. Box dimensions length 20-180 mm x height 15-120 mm x width 70-200 mm 2 Sides Labeling Tamper Evident Labels Horizontal Label roll min. 40 mm max. 400 mm. Serialization make Systech (product tracking) Printer make Wolke (XMV Garvens Wolke Druckstation) Incorrect cardboard ejection Documents available

Key data: 3000 mm, 820 mm, 720 mm

48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining

x-travel: 1660 mm y-travel: 510 mm z-travel: 510 mm Control: M+ Mazatrol Table dimensions: 2000x510 mm table load: max. 1.000 kg number of spindle speeds: 7.000 UpM tool taper: SK 40 tool piece magazine with: 48 Stück weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1740 mm, 760 mm, 660 mm

Mazatrol PC Fusion CNC 640 M Control 30-fold tool changer SK-40 Tool holder according to DIN 69871 Automatic tool length measurement Cooling by the spindle Chip Conveyor, Right Discharge Detachable handwheel Rapid traverses X/Y/Z: 36 m/min CE mark

Mazak VTC 800/30SR CNC Bearbeitungszentrum (2009) Hersteller: Mazak Typ:VTC 800/30SR CNC Bearbeitungszentrum Baujahr: 2009 Zustand: gebraucht, unter Strom in Produktion Betriebsstunden: 34.000h Spindeldrehzahl 18.000 U/min Werkzeugmagazin 48 Werkzeuge Weitere Informationen folgen.

Key data: 1120 mm, 510 mm, 510 mm

CNC vertical machine center. Control unit - MAZATROL M32B Dimensions: 4000x3000x3000mm Table: 1460x510mm Max material weight: 800kg Automatic magazine: 24 tools Tool holder: CAT 40