vt used for sale

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Available in stock 1 x Used ESA VT330W Graphic HMI Console (VT330WAPMOO). The unit is used but is in good working conditions.

Recon Z4R212 / II34WE / B80893 / 35000l/min Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Brand: GME Bavelloni Type: Glassdrill + table Model: VT1250 Chassis number: 10.02.007 Construction year: 1995 Length mm: 2200 Width mm: 1000 Height mm: 1900 Transport size L x W x H: 2,5 x 2,2 x 1,9 Condition machine : Overhauled Photos/film available: Photos available Remaining: Equipped with laser Remaining: Stretch works on air Remaining: Double-sided drill, bottom and top

2 generators Cummins Engine Type VTA 28G5 Year 1997 139 hours of operation Price for unite unit price

A large valve terminal from Festo is offered here. It consists of the following parts: - VABE-S6-10L-C-M1 (543414) - VABF-S5-10-P1A6-G12 (676822) - 3 x VABV-S4-1S-G14-2T2 (668449) - 2 x VABV-S4-2S-G18-2T2 (668434) - VABE-S6-1R-G12 (677887) - 6 x VSVA-B-B52-ZD-A1-1T2L-SA (SA235697B) with sockets - 6 x VABF-S4-1-R1C2-C-6 (540152) with pressure gauge. But it still works without any problems) - 3 x VSVA-B-B52-ZD-A2-1T2L-SA (SA235697D) - VABB-S4-2-WT (539213) In addition, 4 large silencers and various push-in fittings. Of course, the connecting cable has to be re-laid in the VABE-S6-10L-C-M1.

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

ThermoRoll oven Heuft VTR 10.12,5.10 Thermo oil -Thermal oil ovens -Manufacturer: Karl Heuft GmbH - Type: VTR 10.12,5.10 -one oven is for 2 rack trolleys of 10 editions each -Sheet size 58x98cm -Furnaces with exhaust hood -Built in 1998

Used Tetra Therm Aseptic VTIS Plant Complete aseptic processing system designed for the sterilization and treatment of liquid dairy products. This Tetra Therm Aseptic VTIS plant is suitable for processing UHT milk and other high-viscosity products, offering reliable and efficient performance for industrial dairy production. Line Configuration The plant consists of the following main components: - Used Tetra Pak Sterilizer / UHT System - Used Tetra Pak Homogenizer - Tetra Pak Sterilizer / UHT - High-performance aseptic sterilization system for continuous processing of dairy products. Technical Details - Manufacturer: Tetra Pak - Model: Tetra Therm Aseptic VTIS F-12 - Year of Manufacture: 2010 - Capacity: 8,000 l/h - Running Hours: 15,284 Suitable Products - White UHT milk - Cream - High-viscosity dairy products Condition - Very good used condition Tetra P ...

Dear Ladies and Gentlemen, we currently have a Mazak VTC 20 B, for sale. It is fully functional and can be visited at any time.

Key data: 381 mm

Victor Victor Vturn A26Y CNC lathe with Y-axis, driven tools and 2nd spindle CNC Control Fanuc Series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 rpm Spindle motor 22/15 Kw Travel X-axis 190 + 69.5 mm Y-axis travel +55 / -55 mm Travel Z-axis: 850 mm Travel of the W-axis (sub-spindle to main spindle) 830 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone VDI 40 Bar Feeder Irco-Breuning ILS MUK Spindle motor-driven tools 4000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

High-performance fan Zenner, type VTZ 710/63/1 Sonder, built in 2014, consisting of control cabinet, frequency converter, cell airlock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Sonder Year of Make: 2014 Volume: 4.72 m³/s Temperature mx.: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg Remark: The fan is intended for transporting paper/cardboard. In the process, the material is also chopped. The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the mac ...

Key data: 1660 mm, 510 mm, 510 mm

Fully functional Used CNC Machining Center MAZAK VTC-200 C Year of manufacture 2001 The machine has a Fusion 640M control system and is equipped with a chip conveyor, partition for pendulum machining and much more. Location of the machine: 97070 Würzburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Key data: 1120 mm, 510 mm, 510 mm

For sale. Mazak vertical machining center type VTC-20B with Kitagwa integrated rotary axis. X-, Y- and Z-axis travels are 1,120 x 510 x 510 mm. Table size: 1410 x 510mm. Table capacity: 800Kg. Maximum speed is 6,000 rpm. SK-40 spindle holder. The number of tool positions is 24 pieces ATC, max. tool Ø / max. tool Ø 80 mm ditto for free places / max. tool Ø with free places besides 110 mm max. tool length 350 mm max. tool weight 8 kg Feed range xy / feed range xy 1-8000 mm/min. Vorschubbereich z / feed range z 1-8000 Mm/min. Rapid traverse X/Y / rapid feed X/Y 30 m/min. Drive power / drive capacity 15 kW Weight of the machine approx. / weight 6500 kg

Engine Brand: CUMMINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219151, , = More information =, , Type: Engine, Type number: VTA28 CPL0680; Transport weight [kg]: 2500

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, and pistons.

Key data: 1660 mm, 510 mm, 510 mm

For sale: Mazak vertical machining center type VTC-20C with a Mazatrol M Plus controller. X, Y and Z axis movement is 1660 x 510 x 510 mm. Table size. 2000 x 510 mm. Speed range 40 -7,000 rpm. Spindle holder ISO-40. The machining center is equipped with cooling by the spindle. Tool changer with 2 x 24 positions. The machining center is still in good condition. Still to be seen under power, intermediate sale reserved

Key data: 2000 mm, 2400 mm, 1500 mm

Stock number: 3988 CNC CAROUSEL LATHE Manufacturer: ALEX TECH VIPER, Type: VTL 20/24 M Machines NO.: 7640901011, Year of manufacture: 2008 Specifications: Face plate diameter 2000 mm Large turning diameter 2400 mm Face plate speeds ( ) 1-73 / 1-200 2 step rpm Large workpiece height 1500 mm Gr. face plate load 20000 kg X- Movement 1800 mm Y- Movement ( Cross Beam ) 800 mm - 5 Sep each 200 mm Z- Movement 1000 mm C-Axis 0.001 degree Ram size 230 x 230 Power 11/15 Driven tool revolutions 30-2000 rpm Tool Changer 18 (9 Turning 9 Milling ) ISO 50 Stations Main motor 45 Voltage 400 volts Einständer. CNC Control: Fanuc Oi-TD Spindle Hours 10453 Accessories: Chip conveyance. New 2025 Cooling water system. Various accessories. Cooling in the Spindle Delivery time August 2025  ...

Vötsch VTSR 7034/S Climate Test Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber capacity: 335 litres Climatic test chamber Temp. range: -70 to +180°C Mains voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Test Chamber Dimensions: Width 580mm Depth 765mm Height 750mm Exterior Dimensions: Width 870mm Depth 1595mm Height 1775mm Year of Make: 2002 TK-11 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1998 TK 09 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1997 TK 08 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1996 TK 07 More items - new and used - can be found in our shop! International shipping costs on request!

Thermo Oil Trolley Oven Heuft VTR 08.19,0.09 - 2 Heuft trolley ovens - Model: VTR 08.19,0.09 - 3-fold deep ovens with 9 shelves - 3 rack trolleys fit each oven in a row - Automatic wagon retraction - With exhaust hood - Door hinge on the right - Year of construction 2003 - Optionally with boiler

BWT VT2000 Pure steam generator Serial: V16010 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock

Manufacturer: Kraintek Model: HX360-W2/OT/LT+VT1/800x1150x850 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022 Technical Specifications: - Overall Dimensions: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket (container) Dimensions: - External: 470 × 850 × 310 mm - Max Load Capacity: 70 kg - Electrical Requirements: - Power Supply: 3-phase + PE, 50 Hz, 400/230 V, TN-S - Max Power Input: 260 kW - Operating Power: 171 kW - Control Voltage: 24 V - Distribution Box Protection: IP55 - Air Pressure Requirement: 0.4 – 0.6 MPa - Steam Extraction: Connect to central exhaust line - Safety Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Kraintek Model: HX360-W3/LT1+VT1/800x1150x650 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022. Technical Specifications: - Overall Dimensions of the Machine: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket Dimensions: 470 × 850 × 310 mm - Maximum Basket Load: 70 kg - Electrical Data: - Power Supply: 3~N+PE, 50 Hz, 400/230 V, TN-S - Maximum Power Consumption: 260 kW - Control Voltage: 24 V - Current: 396 A - Protection (Electrical Cabinet): IP55 - Compressed Air Connection: 0.4 – 0.6 MPa - Steam Exhaust: Connect to central steam exhaust system - Compliance Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Cummins Type: VTA1710 G1 12-cylinder V12 engine 622 hp 400V 50Hz Twin turbocharger Year of manufacture: 1984 Hours: 7567 A video of the engine running available. Complete with control panel and diesel tank.

x-travel: 1660 mm y-travel: 760 mm z-travel: 660 mm control: Mazatrol M Plus table surface area: 2000 x 760 mm table load: 1,0 t rapid traverse: 24 m/min turning speed range: 7000 U/min power capacity - milling spindle: 11 kW tool taper: SK 40 | | no. of tools in the magazine: 2 x 24 Stück weight of the machine ca.: 8,1 t dimensions: 4,2 x 3,2 x 2,8 m Vertical Machining Center traveling coloumn - internal coolant - chipconveyor - ext, hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Cummins Type: VTA1710 G1 12-cylinder V12 engine 622 hp 400V 50Hz Twin turbocharger Year of manufacture: 1984 Hours: 7567 The engine is soundproofed, but is also available without a container upon request. A video of the engine running available. Complete with control panel and diesel tank.

with complete hold-down device, especially for garbage disposal, with screw-on reversible knife

Manufacturer: Cummins Type: VTA1710 G1 12-cylinder V12 engine 622 hp 400V 50Hz Twin turbocharger Year of manufacture: 1984 Hours: 7567 The engine is soundproofed, but is also available without a container upon request. A video of the engine running available. Complete with control panel and diesel tank.

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 905 Kw, Rated Speed: 18000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-vta28-m2-used/157, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: VTA28-M2; Transport weight [kg]: 2000

A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 1174x644x528 mm Weight: 151 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU316W638 LocationBarneveld CEcheck MakeBecker Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity250 m3/h With motor5,5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm MaterialStainless steel General TypeVTLF 250 Mach.No.1408323 Year of construction1996 Floorspace1,10 x 0,65 m Total height0,70 mGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyVacuum pumpsAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMine ...

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

General SKU321U762 LocationBarneveld MakeGea TypeVT 40 DS CDL-C-16 Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface77 m2 Size length1300 mm Sizes width525 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface77 m² Capacity116.31 Ltr. (zone A and B) Number of platens124 Plate sizes615x1016 mm ConnectionsDN100 (4x) Max. temperature100 °C MaterialStainless steel 1.4306 (304L) General No.171/23406 Year of construction07.2020 Floorspace0,53 x 1,30 m Total height1,60 m Weight1135 kgGeneric medicinesOintmentsPlate heat exchangersTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectione ...

General SKU388X977 MakeZirbus TypeVTS 300 No.2152 (typeplate on cooling instalation) Year of construction2006 LocationBarneveld Pressure Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) General With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg CEcheck Extra information Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/h Generic medicinesFreeze dryersFine chemicalsGreen FridayBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIPowdered foodsZirbusIndustries > Pharmaceutical > Generic medicinesDryers ...

General SKU422U1327 LocationBarneveld MakeBucher Guyer AG Pressure Vacuum possiblecheck Working pressure trays2 Bar Main Features MaterialStainless steel Volume5000 Ltr. Surface30 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface30m² Drying chamber capacity5 m3 Drying chamber sizes1991x2080x1420 mm Max. temperature110°C With jacketcheck Max. temperature100°C Number of trays11 Tray sizes1550x2000 mm Distance between the trays100 mm With 2 doorscheck Connection for the vacuum pumpcheck With vacuum pumpcheck Motor5,5kW, 400/690 Volt, 1455rpm MaterialStainless steel 1.4541 (321) With jacketcheck General TypeVTS D7 30m² Machine number5266/1-11 Year of construction2000 With switchgearcheck Floorspace3x2,6 m Total height2,6 m Weight6300 kg Extra information Extra SpecificationsOn ...

This Mazak VTC 300 C Vertical machining centre was manufactured in the year 2004. It is equipped with a spindle and a chip conveyor. The machine is included with 30 tools.

This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.

This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information.

faceplate diameter: 1.600 mm swing diameter: 2.000 mm turning height: 1.400 mm Control: Fanuc max. Torque: 23.863 Nm cutting capacity: max. 3.000 kgf max. workpiece weight: 10.000 kg table:: table diameter: 1.600 mm table speeds: 0,7 - 280 1/min power capacity - table: 37/45 kW C - Axis:: resolution: 0,001 ° Working speed: 0 - 1.200 °/min max. table speed: 3,333 1/min turret slide:: Shank diameter: 32 mm spindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1 power capacity - Tool Spindle: 15 / 18,5 kW max. Torque: 235 Nm ram cross section: 220 mm axis stroke:: x-axis: 1.900 mm z-axis: 900 mm cross rail adjustment: 700 mm Tool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos. max. tool weight: 50,0 kg draw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/min feed speeds: max. 7.500 mm/min rapid traverse of the crossrail: 300 mm/min total powe ...

This 3-axis Mazak VTC 30C was manufactured in 1998. It features a Mazatrol M Plus control, rapid traverse rates of up to 24,000 mm/min in X, Y, and 20,000 mm/min in Z. The spindle speed reaches 7,000 rpm, supporting a table load of 1200 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 30C machine we have for sale. Contact us for more information.

This 3-axis Mazak VTC-200C vertical machining center was manufactured in 2004. It offers robust capabilities for precision machining. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-200C machine we have for sale. Contact us for more information.

This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information.

This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine.

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg