vr 6 used for sale

EWD GDZ GE 71 high-performance sash gang saw, year 2006, 600 mm stroke. Swing-frame design. Passage width 710 mm, passage height 710 mm, maximum 300 rpm, drive motor approx. 130 kW. Continuous feed through infinitely variable hydraulic transmission with reverse gear and automatic hydraulic overhang adjustment. Hydraulic upper infeed rollers with adjustable pressure, spherical roller bearings, automatic central lubrication, electrical push-button control and shaker chute for sawdust separation. Overhauled and serviced in 2023.

0 hours refurbished by OEM 5.8MW each 50/60Hz mobile (trailer not included) Dual Fuel (Automated Changeover) combustion: water injection Immediately available

turning diameter: 400 mm turning length: 650 mm control: Siemens 840D SL x-travel: 275 mm z-travel: 700 mm spindle turning speed range: 4000 U/min spindle bore: 65 mm turret (x-stations): 16 Pcs. VDI30 tailstock quill taper MT: 4 swing dia.: 600 mm Tools speed: 5000 U/min total power requirement: 37 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: LBH 2,5 x 1,6 x2,0 m - C-axis - 3 driven tools - 4-jaw chuck (Röhm, 250 mm) - Renishaw measuring arm - Chip conveyor - Interface for bar loader - Siemens ShopTurn - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): , mm Number of spindle head vertical: , St. Number of spindles head horizontal: , St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: META Thyssen The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Truss type: HN 120|20 Box profile: 120 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 2,150 kg, with the same distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Conveyor belt SBM 650 20M Year of construction 1992 Conveyor belt center distance 20 m x belt width 650 mm E-motor 7.5 kW + gearbox smooth belt V-Column partly catwalk operational condition Net price ex location € 7,900,-- + VAT Sale from location D - BL Thuringia Code No. Q62

Keyence IM-6225 digital measurement projector including IM-7500 control unit. Works flawlessly and ready to use. Prior sale and errors excepted.

Conveyor belt AA approx. 9 m x GB 650 mm Conveyor belt center distance approx. 9 m x belt width 650 mm E-motor + gearbox Drive drum rubberized smooth belt, troughed + good guide 2 supports operational condition Net price ex location 3,900,-- € + VAT Sale from location D - BL Thuringia Code No. Q58

Keyence IM-6025 digital measurement projector including IM-6600 control unit. Measuring machine works perfectly and is immediately ready for use. Prior sale and errors excepted.

Key data: 800 kW, 600 kg, 500 kW

Sawing area: 6000 x 2500 mm, incl. extraction

Granulator AGRIFON 650 mm x 550 mm for crushing, for example of lumps. Technical data and equipment: • Year of construction: 2022 • Power: 22 kW • Open rotor • Grinder: 650 mm x 550 mm • With control • Unused machine • Spare parts such as sieve and knife can be supplied Condition: mint condition, used and fully functional.

Egli butter reworking line designed for processing and reworking frozen or chilled butter blocks with a core temperature above ± 0 °C. The installation is suitable for industrial butter processing applications where solid butter blocks need to be broken down and prepared for further processing. The line consists of a butter bulk conveyor, Egli, EBSCM 7, V-6000-2, block shredder with a motor of 7,5 kW and Egli, EBW34 reworking silo of 5.000 liter, equipped with 2x augers with a motor of 9 kW and a reduced speed of 6,8 - 27 rpm. The bulk conveyor feeds the butter blocks into the shredder, where the butter is reduced into smaller pieces. The shredded butter is subsequently transferred into the reworking silo, where the twin augers ensure controlled product movement and facilitate further processing. The installation is designed for hygienic food processing and is CIP-cleanable (Cleaning-i ...

Key data: 400 mm, 650 mm, 4000 1/min

Manufacturer: SPINNER Model: TC600 65MC Year of Make: 2022 Control: FANUC Series 32i-MODEL B Programming: FANUC Manual Guide i Tool holder: VDI30 approx. 500h processing hours Processing area Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Bar Passage: 65 mm Travels X-axis: 275 mm Z-axis: 700 mm Rapid traverse X: 15 m/min Rapid traverse Z: 24 m/min Pgjc Esz R Na Ssg S Rrgju Main spindle Max. speed: 4,000 rpm (optional 5,000 rpm) Spindle power: 21 / 27 kW Torque: 201 / 258 Nm Spindle Nose: A8 / DIN Standard chuck size: 250 mm Tool turret 16 tool stations VDI30 Tool Holder Powered tools Max. speed driven tools: 6,000 rpm C-axis available Tailstock NC tailstock MK4 Recording Tailstock stroke: 570 mm Moving centering tip Included in delivery: - Extensive selection of collets of different sizes - Num ...

table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 911 kg traversing speed: 80 m/min dimensions of the machine ca.: 5600 x 2260 x 1960 mm 1. BodorPower 6 kW laser source 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Bodor oxygen control valve and nitrogen control valve 7. Bodor Lightning perforation technology 8. 21.5-inch touchscreen monitor 9. Automatic cutting gas pressure adjustment 10. Active anti-collision function 11. Intelligent vibration protection 12. Burn-resistant mineral cast housing 13. Bodor Mango® ergonomic remote control 14. Gas-saving nozzles with stable flow 15. Smart maintenance reminder 16. Wi-Fi internet connection 17. Smart alarm for anomalies 18. Water cooling 19. Wear parts kit 20. Exhaust system 21. Nitrogen p ...

tube diameter: 8 - 230 mm workpiece weight: 300 kg weight: 2450 kg dimensions of the machine ca.: 9374 x 1872 x 2285 mm Technical Specifications: Max. diameter of round tubing (mm): 8 - 230 Max. diameter of square tubing (mm): 8 - 230 Rectangular tubing (mm): 8 - 230 Profile (mm) Angle steel: 30 - 140 Channel steel: 50 - 140 I-beams: 100 - 140 H-beams: 100100 - 140140 Max. pipe material length (mm) 6500 Max. cut pipe length (mm) 3000 Max. workpiece weight (kg) / (kg/m) 300 / 46 Max. acceleration 1G Shortest remaining material (mm) 70 Positioning accuracy (mm) 0.05 Repeatability (mm) 0.03 Max. material thickness, carbon steel (mm) 16 Max. material thickness, stainless steel (mm) 12 Configuration 1. BodorPower laser source, 6 kW 2. BodorGenius T high-precision laser head with autofocus 3. BodorThinker Tube control system 4. Pneumatic chuck 5. Bodor Lightning perforation technology 6. Adapt ...

Hammel VB 650 E fully overhauled and reconditioned

Hammel VB 650 D Year 2019, only 3880 Hrs, fully overhauled and reconditioned. by Hammel Factory Germany !

TECHNICAL SPECIFICATIONS Description: Haldenband Design: stationary, swivelling Wheelbase: 34,000 mm Strip width: 650 mm Drive power: 11 kW Conveying capacity: approx. 180 t/h Drive type: V-belt drive Idler rollers: 3-part trough stations (Obertrum) Support: V-Column Catwalk: single-sided Handover: Baffle plate Belt tension: tension slide Drive drum: 450 mm Tensioning drum: 350 mm Top Strap Cover: No Galvanized version: no

TECHNICAL SPECIFICATIONS Description: Land conveyor belt system Wheelbase: 91,000 mm Strip width: 650 mm Drive power: 15 kW Drive type: V-belt Conveying capacity: approx. 180 t/h Discharge height: approx. 1,500 mm Handover: Transfer hood Belt tension: tension slide Top Strap Cover: No Galvanized version: no Segment length: 6,000 mm

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Control: Heidenhain 430 ITNC tool taper: SK 40 voltage: 400 V control voltage: 24 V weight of the machine ca.: 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deburring press , Table size 680 x 480 mm , Installation height 600 mm , Capacity 30 to

Ref. -No.: 10564 Manufacturer: TOYODA Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 0.001° Machine can be inspected under power by arrangement.

Ref. -No.: 10617 Manufacturer: KELLENBERGER Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 164300 € : 3105.27 € : 400 to : 6050 mm : 4 (Y1, Y2, X, R) : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 120 mm/s : 8 mm/s : 100 mm/s : 1000 mm : 350 mm/s : 300 mm/s : 250 mm : 1220 mm : 154 mm : 250 l : 37 kW : 7500 mm : 2110 mm : 3810 mm : 34660 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correc ...

Ref. -No.: 10618 Manufacturer: KELLENBERGER Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-40 ...

Ref. -No.: 10619 Manufacturer: KELLENBERGER Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The m ...

The machine is in good technical condition and can be tested by prior arrangement. It includes a chip conveyor or a separate chip tray, a Renishaw probe, a large number of SK40 tool holders (housed in a separate cabinet, as shown in the photos), and a Heidenhain TNC426 control system. Complete documentation for the machine is included.

Ref. -No.: 10396 Manufacturer: KELLENBERGER Year of construction: 1988 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-4 ...

M. No.: VD 09.16.1408 Commission No.: 25.150.71 Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Typical applications Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection

Used vibratory screening machine Manufacturer: Allgaier Type D 600 Masch.-Nr. 597 Screen diameter: 600 mm

EDM machine Sodick AG 60L BJ 2020

Offer 26218 Defective working platform Technical data: - Working height up to approx. 12 m - Lifting height min / max. 10 m - Load capacity 450 kg - Platform dimensions L 2300 x W 1400 mm - Extendable platform - 8 Defective traction batteries 6 V / 225 AH - Space requirement approx. W 2800 x H 2700 x D 1700 mm - Weight approx. 3600 kg

Reciprocating compressor, Gea V600, medium NH3, freezing applications 25 bar – used - : Price from location: 29.500.-€ (net) dismantled, packed and loaded! Manufacturer: GEA Type: Grasso V 600 Package Year of Make: 2022 Serial Number: 220725-6417 PT: 38 5 bar PS LP 25 bar HP HP 25 bar TS Zone A: -60/+150 C TS Zone B: - 10/+170 C TS Zone C: +15/+45 C Flow rate (m³/h): 580 Number of cylinders: 8 Speed range: (rpm/min): 500 – 1,500 Former new price: 45.000.-€ (net) Condition: good Available: immediately Location Bünde, NRW Manufacturer's text: The GEA Grasso V 600 Package is an industrial reciprocating compressor unit from GEA for refrigeration and heating technology, which is designed for the natural refrigerant ammonia (R717 / NH₃) as standard. Package features: Pre-assembled complete units including compressor, drive motor, oil management, sens ...

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of Make: 2013 Working area: 2,000 x 6,000 mm 1 x Plasma torch with power source HiFocus 161i with automatic gas console and Contour Cut Extraction table

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible.

clamping plate: 595 x 445 mm drawing length: 400 mm stroke: 400 mm serial number: 890402 weight of the machine ca.: 1.600 t dimensions of the machine ca.: 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 765 mm z-travel: 520 mm control: FANUC I-Series c-axis: 360 x 0,001 ° b-axis: +30/-120 ° spindle turning speed range: 12000 U/min spindle drive: 22 / 18,4 kW workpiece weight: 500 kg table-size: dia. 630 mm distance spindle nose and table: 210 - 730 mm dimension of workpiece: 730 x 500 mm total power requirement: 54 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,2 x 4,5 x 3,3 m Vertical 5-axis machining centres The VC630/5AX enables high-precision, simultaneous 5-axis machining of your complex workpieces. equipped with: - CNC control FANUC I-Series - NC swivel rotary table ø630mm - 500kg - tool changer 60-fold (BT/ISO 40) - Coolant system / Through Spindle Cooling - Chip conveyor 2745h switch-on hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 300 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed range: 1 - 20.000 mm/min rapid traverse: 36 m/min coolant: IKZ 30 bar voltage: 400 V total power requirement: 25 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 2,35 x 4,15 x 2,95 m chip conveyor: 2,60 x 1,65 x 1,20 m Oil cooler: 0,50 x 0,70 x 1,45 m water cooling unit: 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction The data for this ad was created with ModulMWS - the software solution of Lo ...

travel -x axis: 620 mm travel -y axis: 520 mm travel -z axis: 420 mm control: HEIDENHAIN - TNC 620 number of spindle speeds: 12.000 NC rotary indexing table Ø: 650 mm table: swivelling: -90 / +110 Grad table load: 300 kg numbers of positions in the tool changer: 32 tool taper: SK40 5-axis simultaneous machining center | SPINNER - U5 - 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to the offer for further technical details. Documentation is available! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U5 620 | U5-620 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x EDM machines Charmilles Robofil 6020 built in 1997 and 1999

Optical free-fall sorting system for automated detection and sorting of foreign bodies and defective products in food processing. Manufacturer: TOMRA Sorting NV Type: NIMBUS M 640 Machine Type: Optical Sorter / Freefall Sorter Year of manufacture sorting machine: 2015 Serial Number: HE919 Sorting width: 640 mm (model class) Sorting method: Optical detection with pneumatic rejection Power supply three-phase current: 3 x 400 V / 50 Hz Connected load three-phase current: 2.5 kVA AC power supply: 1 x 230 V / 50 Hz Connected load AC: 3.8 kVA Compressed air supply: 6–10 bar Compressed air consumption: Max. 400 m³/h Water supply: 1–4 bar Water consumption: Max. 500 l/h Nitrogen supply: 0.5–1.5 bar Nitrogen consumption: max. 0.1 m³/h Machine weight: Max. 990 kg (nameplate specification) Operation: TOMRA touchscreen control panel Components: TOMRA NIMBUS M 640 sorti ...

ID3904 Used multi-level storage system with handling equipment / Gebrauchte Stockanlage mit Handling SR STICK SYSTEM MEGA 6000-B Year/Baujahr 1999 Designed as a high-performance machine for bush-hammering concrete blocks of varying heights (50–300 mm) with a working width of 1050 mm. This is a standalone continuous-feed system featuring a conveyor belt approximately 7.4 m in length (approx. 2.5 m at the infeed, 1.3 m for the support section, and 3.6 m at the outfeed). It includes a support structure for the hammer assembly, which features an oscillating lateral movement with an adjustable lateral stroke of up to 60 mm. The machine is equipped with one set of rotary hammers and includes a protective cover. Technical specifications: connected load approx. 10 kW at 400 V, 50 Hz; air consumption approx. 80 l/h at 8 bar. Feed speed: infinitely variable from 0.5 to 3 m/min. System weight ...

EMCO HYPERTURN 665MCPLUS Turning center with C/Y axis Gantry loading system and bar loading magazine Turning-milling machining completely in one clamping Year of construction 2003 Control SIEMENS SINUMERIK 840D Equipment: Gantry loading system with 20 basic pallets automatic bar loading magazine make IEMCA type MASTER 880 MP 2 tool turrets each approx. 12 stations Main spindle with C-axis Sub-spindle with C-axis Chip conveyor make KNOLL Refrigeration unit make KELVIO Included in delivery: VDI Recordings Powered tools Tool cabinet Drawer cabinet Operating Instructions/Documentation Machine parameters on storage medium Technical data and equipment – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes and errors. All other accessories visible in the photos and video are not included in the ...

Metal Band Saw manufactured in 2018. This Pilous ARG 640 DCT SAF features a cutting range of Ø 640 mm for round materials and 550 mm for square materials at 90°. It offers continuous angle setting for miter cutting from 90° to 60° left. With a robust design and a total weight of approximately 4200 kg, this machine is ideal for various cutting applications. If you are looking to get high-quality cutting capabilities, consider the Pilous ARG 640 DCT SAF machine we have for sale. Contact us for further details.

Ref. -No.: 10719 Manufacturer: MAZAK Year of construction: 2010 Type of control: CNC Control: MAZATROL MATRIX Storage location: Halberstadt Country of origin: Japan Machine-No.: 21xxxx X-Travel: 1.000 mm Y-Travel: 650 mm Z-Travel: 4.000 mm Max. Workpiece Weight: 7.000 kg Tool Taper: CAPTO C8 Numbers Of Tools In Magazin: 84 Turning Speeds: 10.000 RPM Drive Capacity - Spindle Motor: 37 / 45 kW Weight Of The Machine Ca.: 32,31 t Operating hours: 46.000 H Further information: EQUIPMENT & ACCESSORIES Machine working light Signal light Operating manuals C-axis scale Linear axis scales Tailstock load indicator and load monitoring system Electronic handwheel Preparation for through-spindle coolant Chip conveyor Oil skimmer The machine is offered including the equipment and accessories listed above.

CONTROLS   electronic controls PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   number of suspensions: 1   number of slide actions: 1 PRESS FORCES   total force (nominal): 25 to PRESS TABLE   table surface (left-right): 645 mm   table surface (front-back): 535 mm SLIDE   slide force: 25 to   table surface (left-right): 500 mm   table surface (front-back): 430 mm   stroke: 400 mm SLIDE (HYDR. PRESS)   return force: 4 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 500 mm STRIP-FEEDER   feeder type: grip feeder   sheet width max.: 76 mm   sheet thickness max.: 3 mm ELECTRICAL SPECIFICATIONS   total power consumption: 7.5 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 4000 kg Machine in like-new condition (lightly used) Optional with convey ...

Feed table used Manufacturer: Strunck Type DST 600 Serial No. 6936 Feeding table (rotary table) for feeding or removing containers into Filling and labeling lines.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 120 x 50 mm Truss type: PNB 0442 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,000 kg at the same distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

CNC Lathe Okuma LU 3000 EX 2PC-600 224197 Control: OSP-P300LA Year of construction: 06/2019 Internal machine no. 84 Turning length: 600 mm Turning diameter max: 410 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system Blum 3D touch probe - Reinforced coolant pump 80 bar Interlit Drum trough filter with additional water tank and high-pressure pump 80 bar - Hainbuch Spanntop Kombi 100 - Door automation - Touchsetter