140,933 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to : 500 mm : 6.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 6000 mm : 3000 mm : 43000 kg : horizontal verschiebbar : 2550 mm : 2200 mm : 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Belt dewarper Weber ASB 600/2, with ribbon and open use, 2 speeds, for an extra charge, the belt and the pressure wheels can be renewed, Connection 400V, dimensions LxWxH approx. 85x77x125cm, weight approx. 220kg, very good used condition, fully functional
Ring die new unused. This die is left over from a machine exchange. For CPM Press 7930-4 6.0x95/40mm Original price 5000 Euro
Max. machine speed: 600m/min, min./max. parent roll width: 600mm/1650mm, max. parent roll diameter: 1000mm, max. roll weight: 2000kg, unwind core diameter: 76mm/152mm, min./max. slitting width: 190mm/1200mm, number of winding stations: 6, number of winding stations for slit widths from 600mm: 2, material thickness range for monofilms: 20µm-170µm, laminates: 40g/m²-190g/m², composite materials: up to 200g/m², rewind core inner diameter: 70mm/76mm/152mm. Equipped with shear slitting with upper and lower knives, contact rewinder with individual lay-on rollers, spreader roller, material infeed device, ionization system at the unwinder and rewinder, adjustable guide rollers at the unwinder and edge trim extraction system. Documentation available. Inspection possible by arrangement.
pressure: 13 t box opening: 890 x 600 mm box depth: 400 mm total power requirement: 2,2 kW weight of the machine ca.: 0,765 t dimensions of the machine ca.: TBH 1,4 x 1,3 x 2,15 m for cans, PET, and cardboard MACFAB (distributed by BEMA Verpackungsabfall GmbH). • Pressing force: 130 kN (13 tonnes) • Motor power: 2.2 kW • Voltage: 230 V / 50 Hz (1-phase, AC) • Machine dimensions: H: 2,133 mm | W: 1,040 mm | D: 1,328 mm • Loading opening: H: 890 mm | W: 600 mm | D: 400 mm • Bale dimensions: approx. 650 mm (H) x 400 mm (D) • Typical bale weights: • Cardboard: 40 – 60 kg (depending on material) • Aluminum cans: up to 25 kg (approx. 1,500 cans) • PET bottles: up to 32 kg (approx. 1,000 bottles) • Special feature: Cross-strapping ensures stable bale shapes for cans and plastics. Fast cycle time of 24 seconds. Low operating noise level of 72 dB. The data for this ad wa ...
faceplate diameter: 630 mm daylight: 140 mm height: 120 mm total power requirement: - kW weight of the machine ca.: 120 Kg dimensions of the machine ca.: 800x600x600 mm - Faceplate with 630 mm diameter. - Short taper mount size 11 - Includes storage box The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sell Flame Flashback Arrester for Jenbacher BR 6
• Deckel Maho DMC 63V; Year: 2001; 8200 spindle hours; Very good condition, freshly checked and ready for shipment • DMG DMC 635 V ecoline; Year: 2013; approx. 2800 spindle hours; Very good condition immediately available • Mazak QT 200 MSY built in 2024; Spindle hours: approx. 500h
Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack AS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 160 x 50 mm Truss Type: PAB0336 Design: Head crossbeam Agraffe: 3 HK (hook) Clear width: approx. 3,600 mm 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
2 used injection molding machines are for sale. Enclosed are the desired photos of our used 280t and 650t Demag machines, Robot, conveyor belt and enclosure. The machines are still involved in series production and can be viewed during operation. The costs and organization for dismantling, transport from the hall to the truck, loading and transport to your location are borne by the buyer. The used 650t machine, robot, conveyor belt and enclosure The used 280t machine, robot, conveyor belt and enclosure
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Contactor Power Contactor Original Packaging -Type: 3RT1065-6AP36 -Auxiliary switch: Type 3RH1921-1DA11 -Number: 2x contactors available -Price: per piece -Cardboard dimensions: 270/200/H240 mm -Weight: 6.6 kg/pc.
Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Siemens, fuse switch disconnector 630 A Ovp -Type: 3NP5460-0CA00 -Quantity: 1x load break switch available -Dimensions: 300/280/H270 mm -Weight: 8.0 kg
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)54 NmMax. torque82 NmTool Magazine with30 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System DMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the h Safety Package for Power FailureSafety Package for Pow ...
GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper ...
GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct ...
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 € : 1181.25 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7.5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Strapping machines MOSCA – fully automatic Location: 41564 Kaarst-Holzbüttgen For sale are high-quality fully automatic strapping machines from the German premium manufacturer MOSCA. The machines are ideal for professional use in logistics, shipping, production, printing and packaging. 1. MOSCA SoniXs TR-6 Pro (built in 2014) • Quantity: 1 piece • Dimensions: L 850 × W 1450 × H 1950 mm • Passage: 600 × 550 mm • Band width: 8 mm • Working/conveying height (FOK): 800 mm, adjustable • Voltage: 230 V • Equipment: Automatic strapping machine with hold-down device and touch screen Technical highlights (SoniXs technology): Patented ultrasonic welding system (SoniXs), low-emission and energy-saving. Standard 6-belt path for fast and tool-free maintenance. The Pro model has a modern HMI touch panel with intelligent control and is Industry 4.0 ready. ...
Infeed hopper with mixing arm and touch screen controls., Including drum trolley, extra drum of 10 mm, extra knive and extra squeezing belt., Only 1348 running hours., Drum: 10 mm, Infeed height: 2400 mm, Outfeed height: 900 mm, Power: 3 x 400V, 50Hz, 9.3kW, Dimensions: 1600 x 1650 x 2900 mm, Weight: 1700 kg
Overview This Gernep Labetta 10-640 2SK is a rotary self-adhesive labelling machine for glass bottles, built in 2007 and used in spirits production. It works with a 10-station carousel and two self-adhesive labelling stations for front/body and back labels, at an output of 8,000 bottles per hour (up to 10,000 bottles per hour depending on the format). The machine comes with format parts and format documentation for 0.7 l, 0.75 l and 1.0 l glass bottles. It is dismantled and stored. Technical data Manufacturer: Gernep Model: Labetta 10-640 2SK Year of manufacture: 2007 Machine type: rotary self-adhesive labeller Containers: glass bottles 0.7 l, 0.75 l and 1.0 l Output: 8,000 bottles/h, up to 10,000 bottles/h depending on format Carousel: 10 stations with rotating bottle plates and spring-loaded top centering Labelling stations: 2 self-adhesive dispensers Label positions: front/body label ...
CONTROLS CNC controls SIEMENS SOLUTION LINE WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 510 mm TABLE table surface (left-right): 900 mm table surface (front-back): 560 mm workpiece load (max): 600 kg SPINDLE / HEAD spindle revolutions (min): 20 /min spindle revolutions (max): 12000 /min tool fixture: ISO SK 40 drive power S6 40%: 13 kW drive power S1 100%: 9 kW spindle torque S6 40%: 82 Nm spindle torque S1 100%: 54 Nm AXIS DRIVES traverse velocity X (max): 20000 mm/min traverse velocity Y (max): 20000 mm/min traverse velocity Z (max): 20000 mm/min rapid traverse X: 30000 mm/min rapid traverse Y: 30000 mm/min rapid traverse Z: 30000 mm/min TOOL MAGAZINE number of positions: 30 tool diameter max.: 80 mm - wi ...
Wire belt with variable adjustable speed., Min speed +/- 4 m/min, Max speed +/- 12 m/min., Belt width: 600 mm, Belt length: 1000 mm, Power: 3 x 400V, 50Hz, 0.37kW, Dimensions: 1050 x 950 x 1400 mm, Weight: 125 kg
Model: ABB IRB 6640 M2004 Variant: IRB 6640-235/2.55 Year of manufacture: 2012/2013 Axles: 6 Load capacity: 235 kg Reach: 2550mm Repeatability: ±0.1 mm Weight: 1310 kg Control: IRC5 M2004 Power supply: 400 VAC, 3-phase, 50/60 Hz
Unit 1: Combination sanding unit Effective sanding width: 650 mm. Sanding belt dimensions: 1900 x 650 mm. Sanding belt motor: 7.5 kW Sanding belt runs over a contact roller and sanding shoe Unit 2: Brush unit / structuring Sanding brush motor: 5.5 kW Brush diameter 240 mm, shaft bore 50 mm Minimum workpiece length: 290 mm. Workpiece thickness: 0.5 – 200 mm. Workpiece feed via conveyor belt, feed speed 8 and 16 m/min Motorised height adjustment with digital electronic thickness gauge Thickness sensor Air Pressure safety device
Key data: 770 KW, 1500 1/min
a used power generator MWM/DEUTZ 604 with AVK generator price engine euro 6.000,= AVK generator price euro 3.500,= ex stock LEENDE - Ned. Tel 0031 653 160178
Wiesheu in-store baking oven Euromat 64 L + S with exhaust hood and ProClean 365. The oven came from a Kaufland store, where it was still in use until 15.10.2026 and was replaced with a new one due to butget allocation. The oven was only inspected by Wiesheu in 8/2026, so the next inspection was 8/2027. The oven is equipped with two tray trolleys, which make it possible to store the trays loaded and, after preheating the baking chambers, to insert them either individually or separately. Due to the closed design, the prepared sheets can be left standing without any problems. The ProClean 365 cleaning system enables the automatic cleaning of the baking chamber without having to refill detergent (1x per year during service). Of course, the water filter 8/2026 has also been replaced More pictures available
The machine is in good technical condition; it can be tested by prior arrangement.
sheet width: 3100 mm plate thickness: 6 mm stroke: 160 mm rear stop: 1000 mm total power requirement: 5,5 kW machine weight ab.: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 375 mm workpiece height: 325 mm grinding height: 325 mm table load: max. 300 kg table longitudinal travel: max. 650 mm table speeds: 1 - 30 m/min grinding spindle speed: 1440/2900 U/min grinding wheel size: 300 x 50 x 76,2 mm grinding spindle drive: 3,7/4,7 kW vertical feed grinding spindle max.: 180 mm/min. cross travel: 350 mm cross adjustment: 1 - 40 mm rapid traverse cross: 1200 mm/min total power requirement: 9 kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 2,75 x 2,10 x 2,05 m - with autom. positioning - Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y- and Z-axis, 1 grinding wheel with flange separate, balancing scale, wet grinding attachemnt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 915 mm, 6000 mm
1 turning and milling center Make: Mazak Model: Integrex 650 H Year of Make: 2004 CNC control. Mazatrol 640 NT-Pro Turning diameter: 915 mm Turning length: 6000 mm Equipment / Accessories: Drill rods Tool measuring device Tool Changer 2 automatic setting sticks diameter 190 – 350 mm 1 automatic setting stick diameter 50 – 268 mm 1 manual setting stick diameter 400 - 610 mm 1 three-jaw chuck diameter 630 mm Cooling lubrication system Coolant tank 1150 l Coolant pump 70 bar otherwise according to the technical data in the appendix. Machine has been regularly serviced and is in very good condition.
CNC Universal Lathe GILDEMEISTER NEF 600 V 3 With Siemens 840 D controller Year of Make: 2009 Circulation Ø over bed: 600 mm Circulation Ø over face slide: 410 mm Spindle bore: 90 mm Flat travel ( X ) : 320 mm Face travel ( Z ) : 1250 mm Speed max. 3000 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver VDI 40 with 6 driven stations Various VDI 40 tool holders Tailstock with quill Collet chuck Hainbuch with 2 collets Foot switch for collet adjustment Coolant spray gun Coolant Setup Chip tray Operating Instructions
CNC universal milling machine HERMLE U 630 T With track control Heidenhain TNC 426 Year of Make: 1998 Travel: X 630 (875) Y 500 Z 500 Speed range: 20 – 7,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 528 mm clamping surface Vertical tool changer with 16 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain Coolant Setup 4 Height Adjustable M
measuring range X-axis: 300 mm measuring range Y-axis: 1 mm Table dimensions: 1 mm tool diameter: 600 mm Control: Pilot 3 measuring range Z-axis: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 600 t, 550 mm
RÖCHER hydraulic press from the site.
Main spindle: Speed 4,000 rpm Power 18.5 kW Bar passage 65 mm Sub-spindle: Speed 4,000 rpm Power 11 kW Bar passage 65 mm Ejector: Hydraulic with flushing Travel in Z 520 mm Rapid traverse in Z 30 m/min Tool carrier I (X/Y/Z): Technology 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z 140/70/450 mm Rapid traverse in X/Y/Z 15/6/30 m/min Tool carrier II (X/Z): 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Z 140/450 mm Rapid traverse in X/Z 15/30 m/min Equipment/accessories: CNC Control TX 8i Chip management Chip conveyor Coolant management Mahle coolant plant with paper belt filter Bar Feeder, FMB Turbo 8-80 - 3m Length Precast Removal Hydraulic Parts Gripper with Conveyor Belt Oil mist extraction
Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature ...
Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder -------------------------------------------- Sold on behalf of a client! Working width (min. – max.): 15 – 230 mm Working height (min. – max.): 10 – 150 mm Width and height are motorized/controlled 6 spindles, spindle diameter 40 mm, 6,000 rpm Spindle configuration -------------------------------------------- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: top Spindle 5: top Spindle 6: bottom Technical specifications provided by the manufacturer – no guarantee! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 6300 mm gear width: 1500 mm max. module: 40 min. module: cutter diameter max.: 400 x 500 mm table surface area: 4000 mm table turning speeds: 9 - 63 U/min max. angle of teeth: 45 Grad total power requirement: 47 kW - standard hob head, - tangential hob head - internal hob head - set of change gears - set of plots The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 1.300 mm travel -y axis: 670 mm travel -z axis: 625 mm control: HEIDENHAIN - TNC 620 number of spindle speeds: 12.000 U/min tool taper: SK 40 table dimension (L x W): 1.500 x 670 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software s ...
max.working dia.above the carriage 650 mm. ,max.working length 4000mm., max.working weight 16 ton., P motor 36 kW, weight of lathe 46 ton
AIRCOOLED CHILLER MTA TAE EVO 602 109.43 KW Cooling capacity: 109.43 kW / 31.11 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SZ160T4RC (scroll) + 2 pcs. Danfoss SZ125S4RC (scroll) Type of refrigerant: R407C Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara FHE 40-160/40/P, buffer tank 500 l. Dimensions: 3.3x1.26x2.16 m Weight: 1404 kg Working hours: 2490/3170/2180/3340 h. Condition: Good
Key data: 640 mm, 640 mm, 640 mm
Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530
Key data: 600 mm, 500 mm, 500 mm
Manufacturer: INAXES Model No.: IKC-600FB Year: 2017 Condition: Used Stock number: 9617 Control system: HEIDENHAIN TNC 620 HSCI Switch-on hours: 6656 h Operating hours: 2299 h Work table length: 650 mm Work table width: 500 mm Maximum table load (even): 300 kg Speed: 12000 1/min X-axis travel: 600 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Cone: BT40 Number of all tools: 24 pieces Machine height: 2280 mm Machine length: 2600 mm Machine width: 2840 mm Machine weight: 4500 kg Equipment: Chip conveyor
used
GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperBT 50 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with m ...
ID3894 Schlick 600 Roto Jet year/Year of construction 1996 Sandblasting system Sandblasting machine
used
GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with120 PositionsSpindle taperHSK-A 100 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control w ...
Key data: 2000 1/min, 1500
Jenbacher JMS 612 | Engine and generator with control cabinets | 2,000 kW el. | Year of manufacture 2016 For sale: Jenbacher JMS 612 gas engine with generator (genset), 2,000 kW electrical power, built in 2016. Condition All maintenance was carried out by 2G according to the Jenbacher maintenance plan. The engine is still in its original condition. Scope of Delivery Engine and generator (genset) Control XT4 Control cabinets A1 and M1 with Diane XT4 Control cabinet with higher-level control Documentation, circuit diagrams Viewing on request. The price is on a negotiation basis.
maximum number of results exceeded
please refine your search
