vr 6 used for sale

Used cone mixer Vrieco Nauta mixer Type 100-RV-5 Material: Mild steel Max product weight 7,000kg Previously, gelatin was mixed with this mixer The mixer is in an uninspected condition. Revision work is also offered at the sale. See pictures

General SKU014G031 MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Mach.No.52624 Year of construction1978 Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor15 KW Specified Features - Conical mixer MaterialStainless steel 1.4541 (321) Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120 degC Outlet with sliding valvecheck Information LocationBarneveld Floorspace3,0 x 3,0 m Total height4,3 m Extra Specifications-- RECONDITIONED -- Catalysts & fillersFeed additivesPaper & otherDiscountOther pharmaceuticsSugarAnimal feedOther feedSolid pharmac ...

Mas VR4A Mk4 Admission in drilling-spindle (morse): Mk4 Max drilling capacity: 50/60 mm Longitudinal travel drilling-head (X-axis): 945 mm Height-travel arm (Y-axis): 710 mm Min dist. round column--drillingsp (X-axis): 310 mm Max dist.round column -- drillingspindle: 1255 mm Dia spindle: 40 mm Max drilling-depth: 310 mm Speeds: 40 > 2000 rpm Power on the spindle: 3 kW Height: 2240 mm Weight: 910 mm ACCESSORIES: 2860 mm Cooling system: 2,55 ton

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

General SKU271X310 MakeLiftVrac Mach.No.1401 Year of construction2014 Main Features Motor1.5 KW Length6000 mm Width350 mm Specified Features - Conveyor belt MaterialStainless steel Elevator beltcheck Trough type conveyor beltcheck Belt width350 mm Belt length6000 mm With motor1,5 kW, 380-415 volt, 1485 volt With variable speed drivecheck Belt speed57 rpm Outlet height1600 mm Information LocationBarneveld Inclined on framecheck Mounted on wheelscheck With switchcheck Floorspace6,20x1,50 m Total height2,40 m Weight700 kg CEcheckConveyor beltsLift VracConveying systems > Conveyor beltsBrand > Lift Vrac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

General SKU397M459 MakeV.R.V. s.p.a. Milano Italy LocationBarneveld CEcheck Type4/20 Main Features MaterialStainless steel Volume250 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryerFlash dryer Continuouscheck Capacity± 250 Ltr ( bruto) Trough sizesdia. 400 mm Inletdia. 100 mm Outlet+/- 190x100mm With jacketcheck Motor15 KW 380 Volt MaterialStainless steel 1.4306 (304L) Information No.B 205 Year of construction1996 Mounted on framecheck Floorspace3,8x1,7 M Total height1,5 M Weight2600 KGCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIPaddle dryersMinerals & inorganicAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsVRVIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed ad ...

Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!

1 piece NAUTA mixer MBX 20s -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of standard steel Virgin -Mixing screw steel Virgin -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 20-R -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixer N.M. Holiness B.V.. spare parts Second-hand machine You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Our product range includes not only new mixer 3-75,000 litre mixing volume, but also machine, which partially or completely be overhauled. In addition we offer transmissions, swing arms, Auger gladly at any time use and Generalüberholten different mixer types (including V-mix, NAUTA - and Vriecomischer) with a comprehensive range of services and spare parts available.

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Eyebolts with wrench RUD 10 pcs StarPoint with wrench VRS-F 1.5t M16 7982215 Load capacity: 1.5 t New ! Dimensions: (box) 220 x 150 x 110 mm

Eyebolts with wrench RUD 8 pcs StarPoint with wrench VRS-F 1.5t M16 7101314 (with plunger) Load capacity: 1.5 t New ! Dimensions: (box) 220 x 150 x 110 mm

Eye bolts with wrench RUD 4 pcs StarPoint with wrench VRS-F 1.5t M16 7982215 Load capacity: 1.5 t New ! Dimensions: (box) 220 x 150 x 110 mm

Pair of Knoll Maschinenbau VRF MT industrial control/operator panels with membrane keypad and display. Auction-ID: A7-46756-495

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

New machine Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Stored in working condition. Auction-ID: A3-44486-16565

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

cantilevered mixer 120l when filled with water approx. 100l usable volume with control box with stud work with ball segment valve as outlet 0 operating hours at the end customer

Equipped with yellow crane bridge, electric chain, rails/ crane track, 2x 21m rails, cabling and control Auction-ID: A1-45845-12

equipped with: Metzeler 120/70ZR19 front tire, Metzeler260/40VR18 rear tire, 1247CC 2-cylinder engine, Toxic Pipes exhaust system, 2x immobilizer, alarm system, Auction-ID: A1-42017-5

Auction-ID: A1-46617-68

Featured; Sale storefront; 2X Future pan; 5X cooling; Crane; Power supply; Extendable; Lighting. (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-42018-90

Machine type: Kieserling VRM 20 Flow Direction: Right to Left Target speed with 3-speed manual transmission, m/min 37.5 / 50 / 75 Main operation 1.5KW Make Kieserling, type VRM 20 Location: Solingen NRW Length 2,200 mm Width 500 mm Height 1,700 mm Weight approx. 600Kg Country of origin: Germany Delivery condition Ex-works Solingen, free loaded truck

KNOLL VRF 900/6000 Coolant system GENERAL Project No.: 905738 Quantity: 1 pcs. Manufacturer: KNOLL Type: VRF 900/6000 Year of Make: 2006 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION GENERAL TECHNICAL DATA Mains fuse 200 A Total power requirement 88 kVA Machine dimensions (LxWxH) approx. 3667x2338x4000 mm REMARK The system supplied three multi-spindle milling machines in one processing line. We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

Arburg A10VSO 18 DFR1/31R-VRA12KB2-S2761 Rexroth Axialkolbenpumpe Hydraulikpumpe Hersteller: Arburg / Rexroth Teilenummer: MNR: R902475215 Type: A10VSO 18 DFR1/31R-VRA12KB2-S2761 Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 3100218

PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction: Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35 Year of construction Refurbished in 2023 Location: Solingen Weight approx. 2,000 kg with substructure and drives Country of origin: Germany Delivery terms ex works

Machine Type: Kieserling Six Roll Straightening Machine Working range from Ø 18 mm to Ø 100 mm Flow direction: from left to right Speed 37.5 / 50 / 75 m/min. Make Kieserling, type VRM 75 Location Solingen Length 1,970 mm Width 980 mm Height 1,900 mm Weight approx. 3,900 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is completely overhauled by our specialist company.

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 3 to Ø 20 mm Flow Direction Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 000 Weight approx. 800 kg Country of origin: Germany Delivery time approx. 8 weeks

Machine Type: Kieserling Six-Roll Straightening Machine Working range Ø 6 to Ø 60 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 60 Weight approx. 3,800 kg Country of origin: Germany Delivery time approx. 12 weeks

Machine Type: Kieserling Six Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35/45 Location Solingen Weight approx. 2,800 kg Country of origin: Germany Delivery time approx. 12 weeks Delivery condition ex works Other: Important: the machine is currently being overhauled by our company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

LWB Steinl Injection Machine Type VREFE 1600/1000/170 Heating platen size 500 X 510 X 63 mm Sliding platens Top and bottom ejectors Clamping force 1600kN Opening force clamp 100kN Clamping stroke 395mm Injection volume E 1000 ccm Max. Injection Pressure E 2200 bar Injection volume EF 170 ccm Max. Injection Pressure EF 1800 bar Hours: 700 since new Year 2009 Weight 6000kg

MAS VR5A, Radial drill, 1500mm arm, MT 4, low price, Can be inspected under power in our warehouse, Arm : 1600mm, Weight : Weight 3,7 Ton, Spindelmotor: 4 kW - 28 - 2500 RPM, Clamiping area : 1800 x 1000, Max dia in steel : 50mm, Max dia in cast iron: 60mm, Max threading in steel : M30, Max threading in cast iron : M42, Distance table spindle nose : 1600 mm

Kovosvit VRM 50A Admission in drilling-spindle (morse): Mk 4/5 Max drilling capacity: 50 mm Longitudinal travel drilling-head (X-axis): 1200 mm Height-travel arm (Y-axis): 1250 mm Min dist. round column--drillingsp (X-axis): 1170 mm Max dist.round column -- drillingspindle: 2070 mm Dia spindle: 70/75 mm Max drilling-depth: 350 mm Speeds: 16 > 800 rpm Power on the spindle: 4 kW Weight: 6,5 ton

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

Bosch VRM 6040 Lid Screwdriver Condition: very good (used) Description: Capper, Can Capper, Can Capper, Can Sealer The machine is high performance and has 4 heads. It can be driven up to 120 pieces per minute, but we drove it to 30 pieces per minute. Currently the machine is set to 400 ml cans from Obeck with (I think 89 mm lid), but the setting can also be changed. The machine has always been serviced and it works perfectly. Capacity: 120 cans per minute The machine is in perfect working order and can also be viewed on site. The only reason for the sale is to change the packaging of our product.