volvo l 90 used for sale

Demolition hammer, chisel hammer, Bosch hammer, mortise hammer, pointed chisel -Length: 900 mm -Width: 40 mm -Hexagon socket -Dimensions: 900/40/35 mm -Weight: 3 kg

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 5549 ...

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction  ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...

wire electrode, welding wire, welding wire -Welding wire: Avesta 904L -EN: 12072 AWS A5.9/SFA 5.9 ER385 -O: 1.00 mm -Dimension: O 300/100 mm -Weight reel: 8.9 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

High Pressure Centrifugal Fan, Pressure Blower, Ventilation Fan, Centrifugal Blower, Blower -Manufacturer: Bauknecht, ventilation fan -Type: P900 02 90S NF 1.1/2-5m -Power: 1.5kw -Speed: 2850 rpm -further data: not available -Dimensions: 360/355/H240 mm -Weight: 29kg

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil

three-phase motor, electric motor -Manufacturer: Dietz, electric motor type DR 90L/4n -Power: 1.5 kW -Speed: 1720 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 325/240/H175 mm -Weight: 18 kg/pc.

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Quantity: 2 available -Price: per piece -Dimensions: 320/198/H220 mm -Weight: 12 kg

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: 22 mm -Design: B5 -Protection class: - -Price: per piece -Quantity: 1 available -Dimensions: 320/200/H225 mm -Weight: 17 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1998

Clamping angle for workpiece clamping, eccentric press -The clamping angle comes from: an eccentric press -Manufacturer Heilbonn Type: REPV60 -Clamping surface: 600 x 720 mm -Plate thickness: 75 mm -Groove: mm -Surface: milled -Dimensions: 735/900/H545 mm -Weight: 532 kg

Transnorm Rising falling Incline with arch belt conveyor GF 6200-800-900-800 RA2180 Technical data: Conveyor length (NL): 7000 mm (6200 mm incline + 800 mm arch) frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7000 ( 6200 + 800 ) Nominal / outside width ...

Gear motor, electric motor, three-phase motor -Speed: 182 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -with electrical separating coupling KEB type Combibox -Dimensions: 620/200/H260 mm -Weight: 38 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 900 mm -Short taper: 11 -Cone: Ø 196 mm -Hole circle: Ø 235 mm -Through hole: Ø mm -Weight: 238 kg

Gear motor, electric motor -Speed: 65 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 470/195/H365 mm -Weight: 29 kg

Piller Blower 63790 KKX 90710 Air blower of 2018, like new, complete with control system, 1 available. 26.5 m3/s, 15 bar, 445 kW Blower Piller 63790 KKX 90710 Manufacturer: Piller Model No.: 63790 KKX 90710 Serial Number: 903736 Type: Air Blower Power [kW]: 445 Flow rate [m3/s]: 26.5 Pressure max [bar]: 15 Year of construction: 2018 Weight [kg]: 8.587

Mixing volume: 900 liters Year of manufacture: 2023 / New machine / Stock machine CE mark: yes 2 paddle shafts Front outlet with pneumatic flap control pneumatic protective cover with safety shut-off incl. mast loading for 200 litre cutter wagon Infinitely variable mixing speed adjustment Mixing time preset Voltage: 400 V / 50 Hz. / 3 phases Connected load: 11 kW Control Voltage: 24V DC Frequency converter / touch control: Mitsubishi approx. dimensions in mm with load Latitude: 2.130 Length: 2.200 Height: 2,750

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Brake -Dimensions: 640/240/H230 mm -Weight: 41 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Brake -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 575/235/H210 mm -Weight: 31 kg

Transnorm roller conveyor 3800-900-855 RA2063 Make: Transnorm Roller width (RB): 855 mm Nominal/outer width (NB): 900 mm Length: 3800 mm Roller diameter: 30 mm Roller distance: 38 mm Drive motor: R32DT71D4 Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) nominal voltage: 380-480 V Conveying length in mm: 3800 Nominal / outside width in mm: 900 Roll width in mm: 855 Roll division in mm: 38 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: including side guides without supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or ema ...

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Transnorm inclined inlet Rejector Rejector Roller spiral 45°/90°-900-800 RA2236 Year of construction: 2008 Conveying angle (WZ + WR): 45° + 45° Mean length (ML): 1150 mm Nominal/outer width (NB): 900 mm Effective width (NUB): 800 mm Conveyor speed: please contact us Roller diameter: 50 mm steel + conical plastic-coated rollers Drive: SEW geared motor Electrical data: 0.55 kW, 380-480 V Center distance: 75 mm Overall height: 120 mm, 450 with motor Overdrive with chain Optionally available: Supports Lateral guide on one and both sides Frequency converter for infinitely variable speed control Ball roller table for infeed and outfeed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Construction year: 2008 angle: 45°, 90° nominal voltage: 380-480 V Nominal / outside width in mm: 900 Roll width in mm: 800 Roll division i ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 1.5 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 530/230/H210 mm -Weight: 35 kg

CALIBRATING SANDING machine SANDINGMASTER SCSB2-900 second hand machine max. working width mm.900 composed by n.2 belts ( 2 separate motors ): 1° belt . calibrating roller in rubber diam.mm.260 . motor power Hp 15 2° belt . pneumatic pad . motor power Hp 10 belt dimension mm. 1900 x 920 volt. 380/50 weigth kgs. 2000

Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg

We are selling here a Menger from the manufacturer Stork u. Herrmann, type KM 90D in a very good used and functional condition. The machine runs on 400 volts, built in 2020, rollable, completely stainless steel, 90 litres, workshop tested, ready for immediate use, dimensions W/D/H 80/110/120 cm, others on request.

Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller, servo module -Manufacturer: Bosch, servo module -Type: SM 4.7/20-GC16 T161-902 -Un: 325V DC -Dimensions 250/60/H260 mm -Weight: 2.3 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E -Power: 1.5 / 1.8 kW 1400/2850 rpm -Plate diameter: 835 mm -Transport dimensions: 1200/1000 / H1260 mm -Weight: 81 kg

Metrohm 904 Titrando with 815 XL Sample Processor Metrohm 904 Titrando with 20 ml burette and 815 robotic sample Processor and 805 Dosimat High End Titrator Potentiometric Titrator, Dynam. (DET) Endpoint titration ,monotonous (MET) Titration.Ion Selective Electrode

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: 610 to 900 mm -Dimension: 1320/670/H1700 mm -Own weight: 287 kg

Wall jib crane, indoor jib crane, indoor crane, workplace crane, wall mount, helmet rail mount, wall mount for swivel arm -Wall mount: for wall jib crane boom helmet rails or similar -Total height: 900mm -Dimensions: see photos -Transport dimensions: 900/200/140 mm -Weight: 17 kg

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Key data: 3 KW, 4 kVA, 10000 V

Technical data engine: Engine manufacturer: Leitner Engine Type: LTE16V4900 Engine power: 3,280 KW Cooling: Water-cooled Tempering: Electric 24 V DC / 2 x 11 KW Speed: 1500 rpm Fuel: Heating oil EN 590 Technical Data Generator: Generator manufacturer: Mecc Alte Generator Type: ECO47HV-1L/4 Generator power: 3900 kVA Voltage: 10 kV Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation / ÜSY Delivery: Built-in Tank: on-site, external Dimensions of the aggregate: Width approx. mm: 2,438 Height approx. mm: 2,700 + silencer Length approx. mm: 12.192 Weight approx. KG: 34,000 Stock number: 1412 Condition: New Year of construction: 2024 Shipping time: 24 KW from AB Hours: New Location: Verl - Germany Scope of delive ...

Contactor, semiconductor contactor, contactor, power contactor, time relay, motor contactor, auxiliary contactor -Manufacturer: Dold, time relay energized with delay, unused in original packaging -Type: MI 907 -Voltage: AC50Hz 230V 0.05-1s -Dimensions of box: 130/85/H40 mm -Weight: 0.1 kg

Transnorm conveyor belt GF 13900-900-800 RA2211 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): please contact Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 scop ...