volvo l 90 used for sale

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: grado 906 -Article No.: 0906 Z2210 S -Quantity: 5 pieces controller available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece

flat gear motor, gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Nord, adjustable gear motor -Type: 3380A-R150U-90L/40 -Speed range: 277 - 43 rpm -Engine: 2.2 kW / 1380 rpm -Hollow shaft: Ø 40 x 140 mm -Design: B14 -Protection class: IP54 -Dimensions: 600/540/H240 mm -Weight: 65 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 510 900 006 1517 222 377 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 3x pumps available -Price: per piece -Dimensions: 220/90/H120 mm -Weight: 5.3 kg/piece

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 510 900 039 1517 222 379 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece

roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: driven, with sensor switch / without control -Drive motor: 0.37 kW -Speed: 18 m/min -Roll width: 900 mm -Roll diameter: 64 mm -Axle distance: 180 mm / adjustable -Conveying length: max. approx. 2630 mm -Total dimensions: 2700/970/H535 mm -Weight: 222 kg

Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shaft coupling, clamping set -Manufacturer: Bikon, clamping set type Dobikon 1012 90x130 -Art.No.: 1031 4163 MKrane -Number: 3x clamping set available -Dimensions: Ø 130 x 86 mm -Weight: 3.4 kg/piece

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=90x244 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece -Dimensions: Ø 90 x 244 mm -Weight: 10.4 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: Baumann, double-acting hydraulic cylinder from electric forklift EVS 25/14 -Stroke: 900 mm -Piston rod: Ø 40 mm -Hole diameter: 25 mm / hole spacing 1170 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 1235/195/110 mm -Weight: 27.8 kg/piece

Digital display, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder, linear encoder, positioner, Balluf switch, position switch -Manufacturer: Marposs, Balluf-Switch Positionnar -Type: 34 05080 903 -Measuring length: 80 mm -Dimensions box: 300/200/H100 mm -Weight: 1.9 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 90JM/25/4/9/24 3S M3AA132MA INT BMLESS -Power: 7.5 kW 1462 rpm -Fan wheel: Ø 900 mm -Number: 3x fan available -Price: per piece -Dimensions: 1140/1140/H610 mm -Weight: 140 kg/piece

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Ferrari, axial fan axial fan -Type: EF 905/I 4S/B A24 -Engine: Ferrari 11 kW 4P 160 50 Hz -Protection class: IP56 -Number: 3x fan available -Price: per piece -Dimensions: Ø 1000 x 675 mm -Weight: 196 kg/piece

1 Qty.1 Second-hand roll grinding machine GRINDER241001-1 Mfc.: Herkules Siegen, min. roll dia.: 250 mm, max. roll dia.: 900 mm, table length: 3,500 mm weight: 20 Tonnes

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - / Contact us at -

Pneumatic diaphragm pump with pressure multiplier. New equipment

Comec FMC 900 3M-I Drill Automatic loading from the magazine Number of spindles 4 4kw main motor Element length max 900mm Element width max 100mm Maximum drilling distance 800mm Drilling capacity depending on the length of the material 500-1100 pcs/h Use in large series of chairs, beds, cots as well as in components of other furniture Net price

Substructure for conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand, frame for roller conveyor -Manufacturer: Soco System, base frame height adjustable -Type: Width 475 mm -Height: 535 to 900 mm, continuously adjustable -Quantity: 1 piece base available -Transport dimensions: 475/180/H535 mm -Weight: 8 kg/pc.

turning diameter over bed: 1790 mm turning diameter over slide rest: 1250 mm turning length: 5000 mm faceplate: 1250 mm workpiece weight: 4500 kg control: Siemens type: System 8 T mm turning speeds: 1,1-300 U/min steady: mm steady: mm total power requirement: 72 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team T ...

General SKU104W505 MakeMorton Machines TypeFKM-900D No.M24052 Year of construction12/´94 LocationBarneveld Pressure Working pressure jacket5.5 Bar Main Features MaterialStainless steel Volume900 Ltr. Motor75 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4401 (316) Powder turbo mixer(1x) Capacity900 Ltr Trough sizesdia. 790x1840mm Top connectionsdia. 150mm + dia. 250mm + dia. 345mm Inspection hatch540x400mm (1x) Outlet160x120mm (2x) + dia. 100mm With jacketcheck Max. temperature162 Degr. C. With adjustable packing glandscheck Motor75,0 KW, 380 Volt (Ex) Speed mixing shaft± 115 Rpm Information ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- Catalysts & fillersFeed additivesDiscountPowder turbo mixersOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals &  ...

General SKU079G409 MakeChaudronnerie Tuyauterie Rhone-Alsace Feyzin No.845 Year of construction1996 LocationBarneveld Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity11.000 Ltr Vessel sizesdia. 2400x1500mm Conical bottom(1500mm) Dished top sidecheck Manholedia. 500mm Top connections3x dia. 250mm Outletdia. 150mm Half coil jacketed(335 Ltr), Half coil in Duplex (1.4462) Max. temperature160 Degr. C. With paddle stirrercheck Motor15,0 KW, 220/380 Volt (Ex) Speed mixing shaftvariable Stainless Steel Reactors MaterialStainless steel 1.4539 (904L) Information Floorspace2,7x2,7 M Total height5,5 MCatalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & ole ...

General SKU390T1166 MakeA. Bolz Wangen LocationBarneveld TypeDB-900-M3 Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume9000 Ltr. Motor18.5 KW Specified Features - Conical mixer Conical mixercheck Density1.16 kg/dm³ Capacity9000 Ltr. (Bruto. 18000 Ltr.) Largest cone diameter3330 mm Cone height5205 mm ManholeDN700 With stainless steel armcheck Motor1: 18,5 kW, 2: 2,2 kW With variable speed drivecheck screw speed (nominal): 66 rpm, arm speed (nominal): 0,7 rpm Motor3 kW Bottom bearing pintle bearingcheck Max. temperature100 °C Bottom dischargeDN 250/300 (side) MaterialStainless steel 1.4404 (316L) Information No.M041305 Year of construction2000 Floor space3,6x3,6 m Total height6,5 m Weight7250 kg ATEX compatiblecheck Extra SpecificationsThis conical mixer has also a Bolz product discharge, specifically type NW250/NW300. It can ...

General SKU079G410 MakeADM Chaudronnerie S.A. Vaulx en Velin No.425 A/B / IMM 96679 Year of construction1995 LocationBarneveld Pressure Working pressure4.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity11.000 Ltr Vessel sizesdia. 2400x1500mm Conical bottom(1500mm) Dished top sidecheck Manholedia. 500mm Top connections3x dia. 250mm Outletdia. 150mm Half coil jacketed(415 Ltr) Max. temperature-20/+160 Degr. C. With paddle stirrercheck Motor15,0 KW, 220/380 Volt (Ex) Speed mixing shaftvariable Stainless Steel Reactors MaterialStainless steel 1.4539 (904L) Information Floorspace2,7x2,7 M Total height5,5 MCatalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubrican ...

General SKU390T1165 MakeA. Bolz Wangen LocationBarneveld TypeDB-900-M3 Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume9000 Ltr. Motor30 KW Specified Features - Conical mixer Conical mixercheck Density1.16 kg/dm³ Capacity9000 Ltr. (Bruto 18000 Ltr.) Largest cone diameter3330 mm Cone height5205 mm ManholeDN700 With stainless steel armcheck Motor1: 18,5/30 kW 690/400-415 Volt, 2: 2,2 kW 230/400-415 Volt With variable speed drivecheck screw speed (nominal): 66 rpm, arm speed (nominal): 0,7 rpm Motor3 kW Bottom bearing pintle bearingcheck Max. temperature100 °C Bottom dischargeDN 250/300 (side) MaterialStainless steel 1.4404 (316L) Information No.M041355 Year of construction2000 Floor space3,6x3,6 m Total height6,5 m Weight7250 kg ATEX compatiblecheck Extra SpecificationsThis conical mixer is equipped with a Valve: Bolz product ...

Channel baling press with manual and automatic operation Bale length adjustable 400,600,800,1000mm Year of manufacture 1987 Machine has been overhauled by us, Master cylinder resealed Bonding 3-fold horizontal Instruction manual with electrical and hydraulic plan available, Control Siemens S 5 Filling opening 580mm w x 900 mm l Bale format 500mm w x 600 mm h

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Ex-lights for painting rooms: used 45-degree luminaires, recessed wall lamps, room lamps. with 2 or 3 or 4 x 58 W fluorescent tubes, for installation in painting systems. Please ask.

Laser engraving machine with 30 watts of laser power - Very few operating hours / used demonstration device (approx. 15 hours) - It's worth taking a look - incl. Windows10 PC 64bit (used / incl. monitor/keyboard/mouse) - Fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Fiber laser source with 30 watts for high-contrast and fast Markings with very high resolution (see pictures) - Wobble function, e.g. for cleaning metal components - Depth engraving up to 3mm possible - for engraving on many metals (stainless steel, brass, aluminium, etc.) and a lot of plastics - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 390 x 270 x 350mm (lxwh) - Clamping surface with mounting threads in 50mm increments - LED work area lighting - 50mm pipe connection for smoke extr ...

Key data: 3000 mm, 200 mm, 400 kg

new laser cutting machine with 4kW fiber laser - Ideal workshop machine - Machine without changing table ! - Loading via manual extension table on the 3 meter side - Very space-saving - Extremely energy-saving cutting system - Only 5 x 3 meters installation area - Incl. commissioning / training Instruction in your factory - 4kW laser source - Top quality, arrange a viewing now! Cutting of steel sheet up to 20mm Cutting stainless steel sheet up to 10mm Cutting aluminum sheet up to 8mm Cutting brass sheet up to 8mm - Travel 3000 x 1500mm - Machine control in German - German service and spare parts supply - incl. nesting module - Very easy to use. - Powerful laser cooler The sale is exclusively to tradespeople. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.0m Height: 2.3m Length: 5.5m To ...

Manufacturer: Morn Laser Type of Machine : PROFILE STEEL LASER CUTTING MACHINE Condition : New Model : MT-H4510 / MT-H50120 HD Series Advantages: - Stable cutting of large-size profile steel - High-precision bevel cutting Parameters: - Profile Steel Processing Range (Customizable): 450×1000mm / 500×1200mm - Laser Power: 12000W–20000W Find more here - / Contact us at -

Manufacturer: Morn Laser Type of Machine : INTELLIGENT THREE-CHUCK TUBE FIBER LASER CUTTING MACHINE Condition : New Models: MT-6000 / MT-9000 / MT-12000 X Series & L Series Advantages: - Innovative 3-chuck technology - One-click clamping technology - Extremely short tailing Parameters: - Laser Power: 1500W – 20000W - Tube Diameter: φ20mm – 160mm / 200mm / 350mm / 500mm - Tube Length: Standard 6m / 9m / 12m

Manufacturer: Morn Laser Type of Machine : HEAVY DUTY TUBE LASER CUTTING MACHINE Conditon : New Models: MT-6000 / MT-9000 / MT-12000 X Series & L Series Advantages: - Intelligent 4-chuck technology - Truly zero tailing - Auto loading and unloading system Parameters: - Laser Power: 1500W – 20000W - Tube Diameter: Ø20mm–160mm / 200mm / 350mm / 500mm - Tube Length: Standard 6m / 9m / 12m Find more here - / Contact us at -

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

Gear Motor with Brake ORIENTAL MOTOR 5GU12.5KB / 5RK90GU-CMF2 ( 5GU12.5KB /5RK90GU-CMF2 ) 1250 / 1500 rpm 200 V Dimensions 300 x 160 x 120 mm

Energy chain, energy guide, 9000 mm, Master L60, Kabelschlepp, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part comes from a spare parts warehouse at a manufacturing plant, has never been used, is new and has only very minor signs of storage. Energy chain, energy guide, Kabelschlepp company, as good as new, Master L60, KR135 /300x90mm open, inside 270x60mm, total length 9000mm, Includes 3 connecting parts, Various separating elements in the cable guide that can be removed.. Material: plastic and aluminium 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Al ...

Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, stable fan -Manufacturer: Multifan, built-in fan suction fan type 6E63 -Engine: 0.60 kW 900 rpm -Conveying volume: 12020 m³/h -Fan: Ø 630 mm / Ø 640 mm -Protection class: IP 54 -Number: 2x fan available -Price: per piece -Dimensions: Ø 630 x 340 mm / Ø 640 x 340 mm -Weight: 13.1kg / 13kg

Jump pads, crack rescue unit System Lansang, used Size 1, type 10 Manufactured by Ziegler not tested without pressure bottle Price: 500.00 Excl. 19% VAT

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

Light curtain Photocell Make: Leuze Electronic Type: SD4R30-1050E 4 pairs, 4x receivers, and 4x transmitters Condition: used but fully functional Only to traders is sold. All information without guarantee

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

From a current recycling we offer you an exclusive lens set. These are 3 CANON lenses "rehoused" by TLS True Lens Services. In detail, they are: 20mm nFD f/2.8 (1990) Serial Number 43174 24mm FD 1:1.4 L (1983) Serial Number 18574 35mm nFD 1:2 (1979) Serial Number 15437 The serial numbers were queried and confirmed from TLS. Year of manufacture: see brackets Condition: good Asking price: VHB Factory Price: Location: 10553 Berlin Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Control: Max.travel range: X mm Y mm Z mm Wave length: um Average power: Watt Max. peak pulse power: kW Laser crystal: the beam source is damaged Made in Germany

Laser cutting machine from our exhibition with 150 watts of laser power Delivery time: immediately available ----- Turn it on and get started ----- ----- machine with only about 50 operating hours ----- ----- Year of construction: March 2022 ----- professional machine ----- - incl. Windows10 PC system / monitor / keyboard / mouse - Manufactures installed cutting and engraving software in German - Coordinated and immediately ready for use - Machine masters very fine engraving as well as precise cutting of thick wood or acrylic glass. - very versatile cutting machine. - Cutting wood up to 20mm thick - Cutting of arcyl glass and many other plastics - cutting fabrics, plastic fleeces, etc. - Cutting rubber mats - Engraving on wood, concrete, stone, many plastics - Production of stamps - Heavy industrial quality - Travel 1300 x 900mm - Drives with hybrid  ...

Key data: 460 mm

Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added

:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long

Haas Laser HL 1203D Optics Construction: 22-31-21-BX Laser class 4 1500 W 1064 nm More items - new and used - can be found in our shop! International shipping costs on request!