volvo l 90 used for sale

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details.

Work piece handling system manufactured in 2014. This LOHMEIER Schräglademagazin features adjustable material lengths of up to 12,000 mm and can handle materials ranging from 20 to 120 mm. It has a maximum load capacity of approximately 30 kg per meter of magazine length and includes pneumatic material alignment to the machine axis. If you are looking to get high-quality handling capabilities, consider the LOHMEIER Schräglademagazin we have for sale. Contact us for further details.

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A.  ...

Brand: MAN Energy Solutions Model: E2876 LE302 Year: 2006 Type: Gas generator set (CHP / WKK) Engine type: Inline 6-cylinder Cycle: 4-stroke Fuel type: Natural gas Turbocharged: Yes Cooling system: Water-cooled Power: 300 kVA Frequency: 50 Hz Voltage: 400V

pressure: 150 t stroke: mm distance between table / ram: 660 mm table surface area: 1500 x 610 mm table height over floor: mm diameter of seal: 150 mm range L-W-H: 1,7 x 1,5 x 2,3 m weight of the machine ca.: t C-frame press - hole in table Ø 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. №: 4252 Frozen meat block guillotine 2 pcs knives for transverse cutting 2 pcs knives for longitudinal cutting Block cross-section: 520 x 300 mm Processing temperature: > -25 °C Max. throughput: 5000 kg/h Hydraulic lifting device Machine dimensions in cm: Width: 110,0 Length: 240,0 Height: 190,0 Installed power: 6,0 kW Voltage: 400 V, 50 Hz

Consisting of a TBA 8 V110 1000ml Square filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Hydraulic Lehnhoff Lehmatic SW25 SD suitable for 30-45t excavators with 90mm bolts and handle width up to 380mm, for all attachments with MS21 or MS25 mount, Condition New

Consisting of a TBA 8 V110 1000ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 V100 LSC 1500 ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 V100 LSC 1500 ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TTB 19 250 ml base filling machine with a Tetra Pak CBP32 V400 Cardboard Packer and a Tetra Pak Straw Applicator SA 30. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 LSC 1000ml filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Screw Cap TCAP 47 and a Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 200V 125 ml Slim filling machine with a Tetra Pak straw applicator TSA 21 Tetra Pak TrayPacker TCBP 70 Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a REX TR/27 500ml and 1000ml filling machine with a Tetra Pak Cardboard Packer TCBP32. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details.

weight max. in kg: 3000 kg stroke: 4980 mm fork length: 1200 mm Number of working hours: ~ 12.100 h weight of the machine ca.: 4897 kg range L-W-H: 3760 x 1260 x 2240 mm Equipment: - Robust LPG forklift, with gas cylinder Ideal for industry, trade or warehouse logistics - Economical LPG engine Flexible for indoor and outdoor use - Robust super-elastic tires for smooth hall floors and outdoor areas - Load capacity: 3,000 kg - Lifting height: 4,980 mm (triplex) - Fork length: 1,200 mm - Parking brake - Operating instructions Stacker is supplied without gas cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

circular angle saw for cutting logs Type: D9 Duplex+LH8 Manufacturer: StrojCad Year: 2018 Hours: 10000 mth Logs max: 800 mm Max log length: 8000 mm Saw blade width: 500 mm Max. lumber size: 180/180 mm, in the mode of wide boards 310/180 mm 2x discharge conveyors 1x loading conveyor 1x sorting tipping conveyor Automatic sorting of cuts Machine weight: 19500 kg Centralized lubrication system, dispenser, cabin Machine in good condition, fully functional, under power Find more here - / Contact us at -

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 8,190 mm Number of fields per row of shelves: 05 pcs. The scope of delivery includes: 06x Shelving rack stand, used Material color: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 30x Shelves, used Material color: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with equal. distributed load. 120x Shelf Racks, Used Suitable for smooth stands Material color: sendz. g ...

Code: 0365 Brand: LTF Model: SB 25 - CE Standard Pillar drill for wood, metals and various materials – CE Standard Technical specifications: Three-phase motor, 2,5 Kw Safety screen Drilling capacity up to 25 mm Height adjustable work table Table dimensions mm 350 x 350 Spindle taper 3 cm N° 9 speeds N° Spindle speed 230 ÷ 1910 rpm Column diameter 92 mm Table/spindle distance 720 mm Base/spindle distance 1250 mm Column/spindle distance 225 mm Overall dimensions mm 400 x 750 x 1800 h Weight kg 180

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralHorizontal machining centre - Horizontal milling head - Chip trough with integrated Coolant tank 300 l / 130 gallo; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross1050 mmLongitudinal800 mmVertical1000 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BAdditional T-slot pallet 630 mm x 630 mmAdditional T-slot pallet 630 mm x 630 mm / 24.8 in x 24.8 in T-slots 14 mm / 0,55 in, clamping surface following DIN 55201-A2Clamping hydraulics 2/4 channe ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 52500 € : 992.25 € : 60 to : 250 mm : 500x430 mm : 750x500 mm : 450 mm : 26 mm/s : 8,5 mm/s : 47 mm/s : 7.5 kW : 1820 mm : 960 mm : 2400 mm : 4000 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 59700 € : 1128.33 € : 100 to : 300 mm : 680x420 mm : 1100x600 mm : 500 mm : 17.5 mm/s : 5,5 mm/s : 37 mm/s : 7.5 kW : 1850 mm : 1400 mm : 2650 mm : 5400 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55600 € : 1050.84 € : 30 to : 200 mm : 500?800 mm : 600x1000 mm : 450 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1750 mm : 2650 mm : 4700 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Manufacturer: SMI Model: LSK 45 T Machine type: Shrink wrapping machine (film packer) Year of manufacture: 2002 Capacity: approx. 45 packs per minute Packaging type: Shrink film (with film discharge) Application: Packaging of beverage multipacks Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2 ...

bar material dia.: 32/38 mm spindle passage: 44 mm turning length: 320 mm turning speeds: 200-8000 U/min c-axis: 0,001 Grad gripping station: 32/38 mm turning length: 120 mm turning speeds: 200-8000 U/min c-axis: 0,001 0 number of tools: 13 fix number of milling stations: 4+5 driven control: Mitsubishi Meldas M70 Number of axles: 5+2 St. total power requirement: 7,5 kW weight of the machine ca.: 2850 kg dimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB m bar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

Manufacturer: F. and M. Lautenschlaeger Model: Magnocert 12 STE (Type 12417) Year of manufacture: 2015 Includes vacuum pumps Unit 1 - Total cycles: 19160 - Last service: February 2026 - Test run passed, vacuum test 0.0 mbar/min Unit 2 - Total cycles: 20273 - Last service: January 2026 - Test run passed, vacuum test 0.0 mbar/min Unit 3 - Total cycles: 18402 - Last service: January 2026 - Test run passed Find more here - / Contact us at -

CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: 2016 Control: Fanuc X: 1270 mm Y: 635 mm Z: 610 mm Spindle taper: SK40 Table: 1420 x 610 mm Max table load: 1000 kg New spindle in 2025 4-axis GSA with tailstock Internal cooling 20 bar Machine in good condition, fully functional, under power Find more here - / Contact us at -

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Roll diameter: 600 mm; Column projection: 580 mm; Cutting depth: 370mm; Swivel table: yes -0 to + 20Â; Table size: 810 x 580 mm; Belt speed: 1660m/min; Motor power: 2.2kw/400V; Engine brake: yes / automatic; Extraction port: 2 x 120mm; Machine length: 1190 mm; Machine width: 800 mm; Machine height: 2063 mm; Weight: 295 kg;

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

working width: 630 mm; working height: 220 mm; cutter head: Tersa; number of blades: 4; height adjustment: electric; read out workpiece thickness: digital; feed speed: 4 / 6 / 12 m/min; infeed roller: steel; outfeed roller: rubber; table roller: yes; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1000 mm; weight: 1000kg;

working width: 500 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2800 mm; table adjustment: lever; read out table height: scala; sourface fence adjustable: yes; motor power: 5,5 kW; machine length: 2800 mm; machine width : 1000mm; weight: 900 kg;

Velati Salami Line existing • Grinder BBTMR 220 • Salt-Band/Spice • Vacuum paddle mash EEC1 • Year 1999

Band width: 150mm; Band length: 2400mm; Veneer sanding device: no; Oscillation: yes; Roll diameter: mm; Grinding unit swivel: yes / 90Â - 0Â; Work table: 730 x 300 mm; Additional table: 420 x 400 mm; Belt speed : 14 m/sec. m/sec.; Suction port: 120mm; Motor power: 1.8 kW / 400V; Machine length: 1480 mm; Machine width: 680 mm; Weight: 160 kg;

PRESSTATION STV1000 FOR SALE OR FOR RENT! Installation STV 1000 Year of manufacture 2016 Dimensions (length x height x width): 3360 x 1561x 1165 mm Pressing force: 300 kN Inlet opening: 1180 x1405 mm Power: 7.5 kW;