volvo l 90 used for sale

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter -LUCA 12 BL standard control unit: 5 pieces -LUB12 direct starter basic device: 5 pieces -wohner: connection terminal plate -Price: complete -Dimensions: 395/240/H220 mm -Weight: 8.1 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer: Motor Lenze type MDFKARS080-22 -Manufacturer: Lenze gearbox type GST06-2A VCR 080C22 -Voltage: 390 V -Power: 3.9 kW -Speed: 197.4 rpm -Shaft: Ø 30 x 60 mm -Construction: B14 -Protection class: IP54 -with: Lenze fan type 4656EZ -Dimensions: 620/200/H210 mm -Weight: 35 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversing block -LUCA 12 BL standard control unit: 6 pieces -LUB120 direct starter basic device: 6 pieces -LU2MBOBL reversal block: 6 pieces -wohner connection terminal plate: 2 pieces -Price: complete -Dimensions: 440/280/H200 mm -Weight: 12 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

gear motor, electric motor, three-phase motor -Handover: in current condition as viewed -Note: Mounting foot damaged (pictures) -Power: 2.2 kW -Speed: 11 rpm -Shaft: Ø 60 x 120 mm -Torque: approx. 2,000 Nm -Design: B3 -Protection class: IP55 -Dimensions: 745/340/H345 mm -Weight: 119 kg

Safety barriers for work platforms, lifts, scissor lifts, aerial work platforms, lifting platforms, personnel lifts, safety barriers, protective wire mesh barriers, safety roller barriers -Safety grille: wire mesh, for scissor lifts or other uses -Wire thickness: 1.5 mm -4 rolls: Width 2.55 m (Length approx. 15 m) -Price per roll: 520 EUR net -2 rolls: Width 2.01 m (Length approx. 15 m) -Price per roll: 480 EUR net -Overall dimensions: 2850/720/H660 mm -Total weight: 450 kg

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 275-HD-283-112-4 -Manufacturer gear Lenze type: 12 435 28 10 HU -Manufacturer Motor Bauknecht Type: 112M R 4 / 4-75 -Motor power: 4 KW -Speed range: 7.4-42.3 rpm -Motor: adjustable -Number: 1 piece of motors available -Price: per piece -Hollow shaft: Ø 70 mm -Dimensions: 620/600/H560 mm -Weight: 152 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 40 mm -Piston rod: Ø 40 mm -Pipe outer diameter: 55 mm -Stroke: 500 mm -Total length retracted: mm -Hole diameter: 30 mm -Piston rod mount: Ø 44 mm ball head -Ideal for building a hydraulic press -Quantity: 50x available -Price: per piece -Weight: 12.5 kg/piece

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -Handover in its current condition as inspected -2 pieces: Transport trolley as a semi-finished product, still without controls and steering. -All 4 wheels are steerable -Heavy-duty transport trolley, max. load capacity: 3000 kg -Load capacity per wheel: 750 kg -Price: complete -Transport dimensions: 2670/440/H430 mm -Empty weight: 598 kg

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Electric motor, three-phase motor -Electric motor for hydraulic pump and comes from a hydraulic press (ID18710) -Manufacturer: Schoen type UTE/B -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Anzahl: 1x available -Dimensions: 445/360/H300 mm -Weight: 62 kg

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: 12.602.10.1.5 -Manufacturer motor HEW type: EEXF80L/4 -Speeds: 24 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 505/230/H170 mm -Weight: 23.3 kg/piece

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: HAAS LASER -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Q-BW-Driver: 68.11.40 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/500/H135 mm -Weight: 14 kg

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 Screen keyboard -3x cards type: EK-1 MPS 732/015 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/398/H290 mm -Weight: 18 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg

Flat gate valve, knife gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without drive -Connection: DN80 -Width: 50 mm -Nominal pressure: 10 bar -Inner part: stainless steel -Number: 1x valves available -Price: per piece -Weight: 9.5 kg/piece

geared motor, electric motor -Manufacturer of gearbox: Lenze, Type: 52.114.04.20 -Manufacturer Motor Lenze Type: D 71 L4 -Speed: 92 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 20 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 360/160/H200 mm -Weight: 13.7 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot is broken in one place -Power: 3.5/14 kW -Speed: 730/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 620/390/H310 mm -Weight: 130 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of adjustable gearbox Lenze Type: 11.715.03.04 -Manufacturer of gearbox: Lenze, Type: 52.145.04.100 -Manufacturer Motor Hanning Type: EeDF71L/2 -Motor power: 0.55 kW -Speed range: 46-264 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Design: B5 angle -Quantity: 1 motor available -Price: per piece -Dimensions: 480/220/H220 mm -Weight: 25 kg

Gear motor, electric motor, electric gear motor -Manufacturer Motor Hanning Type: 8D4-351 -Manufacturer gear LENZE type: 12.102.05.1.1 -Speed: 150 rpm -Power: 0.55 kW -Construction: B3 -with electrical separation coupling Lenze type 14.127.08.11 -Diameter shaft: 25 mm -Protection class: IP 44 -Dimensions: 580/200/H210 mm -Weight: 25 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 kW -Speed range: 18-88 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Drive shaft: Ø 25 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 430/350/H205 mm -Weight: 31.7 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Lenze type variable speed gear: 155-ZNA0-80-4 -Motor power: 0.75 kW -Speed range: 11.5-59 rpm -Speed: adjustable -height shaft axis: 120 mm -Drive shaft: O 25 mm -Construction: B3 -Number: 1 motor available -Dimensions: 390/400/H215 mm -Weight: 31.9 kg -Function tested

Gear motor, electric motor, electric gear motor -Manufacturer motor Lenze type: 8F4-996H -Manufacturer gearbox Lenze type: 52.122.05.00 80L/4-H-TH -Speed: 70 rpm -Power: 0.75 kW -Construction: hollow shaft -Diameter shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H190 mm -Weight: 20 kg

Gear motor, electric motor -Gearbox Lenze type: 12.623.12.3 80S/4-H-TH -Motor Lenze type: 8D4-998H -Speed: 10 rpm -Power: 0.55 kW -Construction: B14 -Shaft diameter: Ø 30 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 525/150/H280 mm -Weight: 23 kg

Gear motor, electric motor -Gearbox Lenze type: 12.623.12.3 71L/4-H-TH- -Motor Lenze type: 7KC4-063H -Speed: 13 rpm -Power: 0.37 kW -Construction: B14 -Shaft diameter: Ø 30 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 475/175/H220 mm -Weight: 21.5 kg

Gear motor, electric motor, electric gear motor -Manufacturer gearbox Pujol type: LBC-87 -Manufacturer motor VEM type: KPER80K4 -Speed: 22 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 35 mm -Protection class: IP 54 -Number: 4x motors available -Price: per piece -Dimensions: 450/230/H290 mm -Weight: 33 kg

Elevator motor, gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer Motor Flender Type: LUGA-160LD-04Y -Manufacturer gearbox Wittur type: SRP3100 -Power: 22 kW -Speed: 59.4 rpm -Construction: B3 -Diameter shaft: Ø mm -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 1060/660/H830 mm -Weight: 668 kg

Elevator motor, gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer motor Flender type: LUGA-160LQ-04Y -Manufacturer gearbox Wittur type: SRP3100 -Power: 25 kW -Speed: 59.4 rpm -Construction: B3 -Diameter shaft: Ø mm -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 1060/660/H830 mm -Weight: 668 kg

Hydraulic motor, oil motor, hydraulic pump -Motor: unused -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 62 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 360/150/H150 mm -Weight: 23 kg

Servo motor, geared motor, electric motor, three-phase motor -Handover in its current state as shown in the pictures -Cable connection is loose -Manufacturer Motor Lenze Type: MDFKARS080-22 -Manufacturer of gearbox: Lenze, type: GST07-2NVCK2E -Power: 3.9 kW -Speed: 70 rpm -Shaft: Ø 40 mm -Design: B5 -Protection class: IP 55 -Number: 1x motor available -Dimensions: 720/200/H245 mm -Weight: 53 kg

Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -comes from an Alberti drilling rig -max.: 18x drill -Admission: -alternately turning right/left -Distance drill: 50 mm -Distance drill: 25 mm -Number: 2x drilling heads available (1x left/1x right) -Price: per piece -Dimensions: 1090/380/H580 mm -Weight: 210 kg/piece

Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: GST04-1MVBR071-31 -Manufacturer motor Lenze type: MDXMA42M071-31 -Power: 0.25 kW -Speed: 825 rpm -Shaft: Ø 20 mm -Construction: B3 -Protection class: IP 55 -Brake -Number: 3x motors available -Price: per piece -Dimensions: 430/205/H150 mm -Weight: 14.3 kg

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm -Weight: 108 kg

Trusses, trade fair construction, trade fair trusses, lattice masts, partition walls for trade fair stands -Quantity: 4x transport trolleys with partitions and lamps -Equipment: 3x frames, each with 2 pieces lamps size 1500 x 2500 mm -Accessories: see photos -Transport dimensions: 1350/950/H900 mm -Weight: 120kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gear Lenze type: GSS06-2MHAR080-32 -Manufacturer motor Lenze type: DERAXX080-32 -Speed: 14 rpm -Power: 0.75 kW -Construction: hollow shaft angle B3 -Diameter hollow shaft: Ø 40 mm -Protection class: IP 55 -Dimensions: 355/160/H220 mm -Weight: 48 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outside saw blade: Ø 250 mm -Height: 4 mm -External cutter: Ø 237 mm -Height: 18 mm -Take: Ø 80 mm -1x: right -1x: left -Price: complete -Weight: 9.1 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Hanning type: 8F4-083 -Motor power: 0.75 kW -Speed range: 35-189 rpm -Motor: adjustable -Height shaft axis: 115 mm -Drive shaft: Ø 25 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 400/450/H220 mm -Weight: 31 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: D48L -Motor power: 0.75 kW -Speed range: 21-118 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 390/400/H250 mm -Weight: 31 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox Lenze type: 11.431.10.08.1 -Manufacturer Engine ATB Type: ERFY 0.55/4-7 -Engine power: 0.37 kW -Speed range: 111 to 617 rpm -Motor: adjustable -height shaft axis: 50 mm -Quantity: 1x available -Price: per piece -Drive shaft: Ø 16 mm -Dimensions: -Weight: 22 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Lenze Type: 11.512.03.00.0 -Manufacturer engine: Hanning type: 7A8-271 -Motor power: 0.18 kW / 380 volts -Speed range: 82-490 rpm -Design: adjustable -Design: B3 -Height of shaft axis: 78 mm -Drive shaft: Ø 14 mm -Quantity: 3 engines available -Price per piece -Dimensions: 360/204/H190 mm -Weight: 18kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 180 mm -Piston rod: Ø 125 mm -Pipe outer diameter: 210 mm -Stroke: approx. 350 mm -Pressure force at 180 bar: approx. 45 tons -Total length when retracted: 860 mm -Hole diameter: Ø 65 mm -Ideal for building a hydraulic press -Number: 2 cylinders available -Price: per piece -Dimensions: 200/280/H860 mm -Weight: 150 kg/piece