134,063 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter: 780 mm gear width: 130 mm max. module: 8 / 10 table diameter: 510 mm table bore diameter: 160 mm number of strokes (double strokes): 30 - 1500 DH/min Control: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mm table-size: 500 mm total power requirement: 36 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,9 x 3,65 x 3,8 m The machine is suitable for: - Internal and external gear teeth in small quantities - Internal gear teeth in blind holes (non-through holes) - External gear teeth without run-out, as hobbing would not be possible Examples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs... - Siemens Sinumerik 3 CNC control - Chip conveyor Machine was only used sporadically The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.
Second Hand CompAir L55RS 55 kW at 10 bar and 10.31 m3/min. New control system installed. Built in 2016 with around 46,000 hours. Frequency-controlled.
gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.
1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.
1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).
1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.
1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.
We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...
x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...
Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 5,330 mm Number of fields per row of shelves: 04 pieces of 1,295 mm each Number of levels incl. compartment dividers: 04 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 05x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 24x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,295 x 790 x 40 mm Weight | Pcs.: approx. 12.82 kg 48x Freestanding partitions, used Total depth: 765 mm f. Stand depth: 800 mm Total height: 315 mm Usable height: 275 mm Material colour: sen ...
Dosing pump with 90 l/h flow rate Properties: Length 370 mm Width 200 mm Total height 430 mm Volume 90 L Engine power 0.43 kW Manufacturer: LEWA ecodos Manufacturer Serial No. EEK 0090 S11
40,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 40000 L Material V2A (AISI 304) 1.4301 Insulation 100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6300 mm Cylinder height 4500 mm Diameter 3900 mm Number of feet 6 Description: Topsoil: Curved bottom 2 crane eyes CIP ball on the side Level measurement with socket 1/2" Agitator agitator decentralised with 4 paddle stages Manhole Ø DN 440 Breathing nozzle Ø 700 mm with condensation drain 2 x CIP Ball Subsoil: Flat bottom with small cone bottom at the front forward-drawn residual drain pipe with flanges DN80 6 tube feet with spherical plates - height adjustable with base plate
An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.
30,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 30000 L Material V2A (AISI 304) 1.4301 Insulation 60 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3700 mm Diameter 3900 mm Number of feet 4 Description: Topsoil: Curved bottom CIP Ball Guiding Beam CIP Ball Sensor for level measurement Threaded Socket DN65 Stick Agitator Mixer with Propeller Manhole Ø DN 480 Ventilator DN 300 Tank cylinder: Tasting tap Subsoil: Cone base Outlet surround with disc valve DN80 Sensor for level measurement 4 profile feet with domes - height-adjustable with base plates
800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50
10,000 litre storage tank made of V2A insulated horizontal Properties: Volume 10000 L Total length outside 4300 mm Length inside 3150 mm Cylinder length 3150 mm Total height 2600 mm Diameter 2000 mm Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Horizontal design Number of feet 6 Insulation 100 mm Description: Insulation 100 mm Tank crest: 2 connections DN 65 CIP Cleaning In front: Sensor for level measurement Flange DN 50 Manhole DN 500 round Sewage drain DN 150 with butterfly valve Remaining drain DN 50 + DN 65 Below: 6 trumpet feet fixed
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 7,510 mm Number of fields / row of shelves: 05 pcs á 1,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm deep 20x Pallet rack crossbar, used Material colour: orange U-profile: 150 x 50 x 3.00 mm Agraffe: 4 HK (hooks) Design: Head crossbeam Clear width: 1,400 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional ...
Hook mobile mixing plant with Liebherr ring plate mixer R 0.75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Liebherr, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 45 – 50 kW Operation is via wireless handheld transmitter (1st mixer: on/off; 2. Conveyor belt on/off and open/close mixer).
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 7,760 mm Number of fields / row of shelves: 05 pcs á 1,450 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm deep 20x Pallet rack crossbar, used Material colour: orange Truss Type: PNBH0443/1.5 Box profile: 130 x 50 mm Agraffe: 4 HK (hooks) Design: Head crossbeam Clear width: 1,450 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members ...
60,000 litre service water tank UTH made of V2A insulated horizontal Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry
3,000 litre agitator tank made of V2A Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 3500 mm Cylinder height 2000 mm Inner diameter 1350 mm Width 1500 mm Number of feet 3 Vertical design Last use of additives Description: Topsoil: Inclined cone base Level measurement Filling line pulled down Thermometry CIP Ball Manhole Ø 450 mm Agitator with propeller Ventilator Ø 350 mm Tank cylinder: CIP ball at the bottom of the agitator propeller Agitator type R132S - 8/4 PRG motor. No. 82/495 Flow breakers around propellers Perforated Pipe Tube Subsoil: forward-drawn residual drain pipe with disc valve Thermometry 3 trumpet feet with dome height adjustable with stiffeners on the legs and bottom
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally refurbished in 2020 Fill capa ...
Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.
Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg
Key data: 2100 KG, 19540 mm, 8200 mm
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,540 mm Number of fields per row of shelves: 07 pcs á 2,700 mm Number of levels plus ground level: 04 pcs. Technical data on the volume: Pallet spaces per field: 15 pcs. Pallet spaces per row of racks: 105 pcs. Total pallet spaces: 105 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700 kg The scope of delivery includes: 08x Pallet rack stand, used Material color: blue Profile dimensions: U 80 x 60 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) 8,200 mm high 1,050 mm deep 56x Pallet rack crossbar, used Material ...
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 16,760 mm Number of fields per row of shelves: 06 pcs á 2,700 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 54 pcs. Total pallet spaces: 54 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700 kg The scope of delivery includes: 07x Pallet rack stand, used Material color: blue Profile dimensions: U 80 x 60 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) 3,200 mm high 1,050 mm deep ...
Technical data for the pallet racking system: Shelving system: Vogelsang Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 13,920 mm Number of fields per row of shelves: 05 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, new Material colour: sendzimir galvanised Profile dimensions: P 70 x 80 x 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,200 mm Depth: 1,100 mm 20x Pallet rack crossbar, used Material colour: orange Box profile: 110 x 50 mm Agraffe: ...
Tol measurements: - 0 weight max.: - t range L-W-H: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tol measurements: - 0 weight max.: - t range L-W-H: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1500 mm width: 800 mm drawer block: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. temperature: 800 Grad size of opening: Durchmesser 430 mm depth of chamber: 630 mm dimensions of the machine ca.: 2 x 1 x 1.6 m weight of the machine ca.: 530 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Type: KUX750VAC Serial number: 12110 Year of construction: 2007 Bowl capacity: 750 litres Knife speed: variable, 60 - 3300 RPM Mixing speed: 150 RPM Bowl speed: 4, 7, 10, 14 RPM Power: 3 x 380V, 50Hz, 273kW Compressed air: 6 - 10 Bar Water: 2 - 6 Bar Dimensions: 4330 x 3700 x 3050 mm (open lid) Weight: 7900 kg With double lifter for 200L tote bins and unloader
Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...
Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...
x-travel: 3.000 mm y-travel: 1.000 mm z-travel: 860 mm Control: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mm T-slots: 7 x 18 T - slots distance: 125 mm distance table - lower edge spindle: 25-366 mm table weight: 4.200 Kg b-axis: +-105 ° c-axis: +-360 0 rapid travel x/y/z: 30.000 mm/min rotary table: Durchm. 1.000 mm max. turning diameter: 1.400 mm number of spindle speeds: 9.000 U/min/rpm tool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kW max. torque on the spindle: 240 Nm tool change unit: AITEK, 40 fach : 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bar total power requirement: 65 kW weight of the machine ca.: 24,8 t dimensions of the machine ca.: 8.056 x 5.496 x 3.790 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used tank with anchor agitator, capacity 300 liters. Water jacket heated by heaters. Made of stainless steel. Electric drive with gear motor. Control cabinet.
Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg
LBBC Autoclave Internal dimensions 1000mmx1500mm Type: Quicklock Thermoclave Heat rating 30kW 6 Vacuum bags Heating ramp 5°C/min, 218psig, 220 Kgs combined materials, Year 2001 Complete with material trolley, associated piping, control panel
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 40,300 mm Number of fields per row of shelves: 14 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 21 pcs. Pallet spaces per rack row: 294 pcs. Total pallet spaces: 294 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 400 kg The scope of delivery includes: 15x Pallet rack stand, used Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 168x Material colour: RAL 1007 d ...
Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.
The scope of delivery includes: 01x Lightweight water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Robust, 3-layer construction Weight: 2.60 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
maximum number of results exceeded
please refine your search
