We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan
used
max. turning length: approx. 750 mm, spindle bore 40 mm, max. 1800 rpm, with Multifix quick-release system, coolant device and 3-axis digital display, Fabr. ELESTA
used
max. turning length: approx. 2000 mm, centre height: approx. 300 mm, hollow spindle diameter: approx. 100 mm, with Multifix clamping system
used
Center height: approx. 250 mm, max. turning length: approx. 2000 mm, hollow spindle diameter: approx. 12 mm, with 3-axis digital display, Fabr. HEIDENHAIN, machine light, Multifix quick-release system
used
max. turning length: 3000 mm, center height: approx. 300 mm, hollow spindle diameter: 100 mm, with 3-axis digital angle, Fabr. SONY, 1 three-jaw chuck, Multifix quick-release system and coolant device
used
Description: 80 x LED Panel Recessed 12W - LED SMD - square 6500K (daylight) - 960 Lumen - AC220-240V - Lifespan: 30,000 hours - Driver included - Dimensions: 170mm x 28mm - Mounting diameter: 140mm - Beam angle: 40 degrees - Suitable for indoor use Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 32 kg
used
Description: 80 x LED Panel Recessed 12W - LED SMD - Round - 6500K (daylight) - 960 Lumen - AC220-240V - IP20 - Lifespan: 30,000 hours - Driver included - Dimensions: 170mm x 20mm - Mounting diameter: 140mm - Beam angle: 120 degrees - Suitable for use inside Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 32 kg
used
Description: 80 x LED Panel Surface Mounted 12W - LED SMD - square - 6500K (daylight) - 960 Lumen - Dimensions: 160mm x 28mm - (AC220-240V) 50/60 Hz - Driver included - IP20 - Lifespan: 30,000 hours - Beam angle: 40 degrees - Mounting kit included - Suitable for indoor use Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 32 kg
used
Description: 80 x LED Panel Surface Mounted 12W - LED SMD - Round - 6500K (daylight) - 960 Lumen - Dimensions: 160mm x 28mm - (AC220-240V) 50/60 Hz - Driver included - - IP20 - Lifespan: 30,000 hours - Beam angle: 40 degrees - Mounting kit included - Suitable for indoor use Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 32 kg
used
Specifications: Center height: 220 mm Center width: 1000 mm Spindle bore: 55 mm Bed width: 430 mm Speeds, 2 stages: 18 - 1800 1/min Tailstock mount: MK 4 Quill stroke: 190 mm Feed rate: 0.30 - 3.26 mm/rev Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm Equipment: - Quick-change holder System Multifix - Bed stop - Coolant device -Mudguard - Turning chuck protection with restart protection
used
Article number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories 3-axis digital display SINO New 3-jaw chuck 200mm New Quick release holder size B + 1 insert ...
used
Article number: 04-03-141 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1986 L x W x H: approx. 2000x1000x1700mm Weight: approx. 900kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø340mm Max. turning diameter via support: approx. Ø185mm Max.turning length: approx. 800mm Rod passage: approx. Ø42mm Spindle: Speed range: approx. 30-2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.016-0.50mm/rev Suitable for threads: metric 0.18 – 28 mm inches 80 – 1 gg/" Diametrical – Pitch Thread 200 – 2 3/4 Dp Module 0.1 – 9 Tailstock: MK3 Accessories 3-axis digital display SINO New 3-jaw chuck 160mm New Quick Release Holder Size ...
used
Article number: 04-03-117 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories 3-axis digital display SINO New 3-jaw chuck 200mm New Quick release holder size B + 1 insert ...
used
Article number: 04-03-224 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1987 L x W x H: approx. 1500x1000x1700mm Weight: approx. 600kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø280mm Max. turning diameter via support: approx. Ø160mm Max.turning length: approx. 500mm Rod passage: approx. Ø36mm Spindle: Speed range: approx. 15-3550 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.05-0.80mm/rev Suitable for threads: metric 0.20 – 12 mm inches 80 – 2 gg/" Diametrical – Pitch Thread 160 – 6 Dp Module 0.1 – 4 Tailstock: MK3 Accessories 3-axis digital display SINO New 3-jaw chuck 160mm New Quick Release Holder Size A + 1 Insert ...
used
Article number: 04-03-218 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories 3-axis digital display SINO New 3-jaw chuck 160mm New Quick Release Holder Size A + ...
used
Article number: 04-03-165 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø475mm Max. turning diameter via support: approx. Ø270mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 13-2000 rpm Spindle nose: A 2-6 Drive power: approx. 7.5kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.014-1.00 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories 3-axis digital display SINO New 3-jaw chuck 200mm New Quick release holder size B + 1 ins ...
used
Article number: 04-03-147 Manufacturer: Weiler Very good general condition Machine geometrically overhauled Delivery time: on request - subject to prior sale Year of construction: as good as new L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 3.8kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: metric 0.30-10mm inches 80 – 2 3/4 gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories 3-axis digital display SINO New 3-jaw chuck 200mm New Quick release ...
used
Article number: 04-03-110 Manufacturer: Weisser Heilbronn Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 3500x1000x1700mm Weight: approx. 3500kg Digital display: 2-axis digital display Heidenhain Dimensions: Max. turning diameter over bed: approx. Ø425mm Max. turning diameter via support: approx. Ø240mm Max.turning length: approx. 2000mm Rod passage: approx. Ø58mm Spindle: Speed range: approx. 28-2500 rpm Spindle nose: A 2-5 Drive power: approx. 5.5kW Tailstock: MK4 Accessories 3 – jaws – chuck Schunk Ø 250 mm Quick-release steel bracket + 4 inserts Electric feed protection Work light Complete machine documentation NOT – Off Various tension wrenches Coolant device L+Z spindle cover Machine feet Various turning steels ...
used
Article number: 04-03-118 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1987 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories 3-axis digital display SINO New 3-jaw chuck 200mm New Quick release holder size B + 1 insert Bed stop Work light Coolant Device New ...
used
Article number: 04-03-220 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories 3-jaw chuck 160mm New Quick Release Holder Size A + 1 Insert Bed stop Work Light New Coolant Device New Complete documentation N ...
used
Article number: 04-03-226 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1994 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories 3-axis digital display SINO New 3-jaw chuck 160mm New Quick Release Holder Size A + ...
used
Capacity: 5.9/5.6 m3/min, pressure: 1.5/1.7 bar, Connections: 110 mm tube
used
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
used
Key data: 315 mm, 630 mm, 10 U/min
Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,
used
Manufacturer : Sidel Model: 99000863608 Power supply: 220 V Cutting capacity: ? 60 - 160 mm Maximum length 400 mm Maximum number of simultaneous cuts: 4
used
Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W
used
Manufacturer: VWR VWR Model: INCU-Line 68R Type : Refrigerated incubators Temperature stability (time) (?C) ?0.1 at 37 ?C Temperature uniformity (?C) ?0.3 at 37 ?C Capacity 68 L Temperature range +3...70 ?C Type of convection: Forced convection Maximum chamber capacity 20 kg W?D?H int. 470?300?430 mm W?D?H ext. 570?680?600 mm Power rating (W) 250 Weight 41 kg Maximum load per shelf (kg) 10
used
Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift ...
used
Description: control: SIEMENS Simatic HMI Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
The intended use of the LOGOMATIC 906 II B90 is the printing and application of labels to products. Continuous labelling requires a distance between the products Printing process: direct thermal and thermal transfer Power: 6,0 - 7,0 bar Operating pressure: 5.5 - 6.0 bar Connection: Plug-in screw connection (e.g. Festo, KD 1/2 and KS P6) Consumption: approx. 100 l/min for LOGOMATIC B 90 approx. 300 l/min
All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de
new
Three Chucks Laser Tube Cutting Machine Suitable for heavy-duty processing and pipes of various shapes For pipe diameters from 20 to 350 mm Minimal to no waste Upload up to 12m long pipes Unloading up to 9m Powerful servos with high speed and precision in positioning Automatic uploading and unloading of tables CW fiber laser 1000-6000W CAM software for managing the machine Optional: Weld seam detection Laser swivel head
Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...
used
faceplate diameter: 0 mm turning diameter over slide rest: 900 mm turning length: 1.000 mm total power requirement: 25 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine ...
used
turning diameter over bed: 920 mm turning diameter over slide rest: 720 mm turning length: 4000 mm turning speeds: 1,4-280 U/min digital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm spindle bore: 38 mm spindle turning speed range: 80 - 2000 (18) U/min upper slide-adjustment: 100 kW longitudinal feeds:: 0.052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm threading WHITWORTH: 58 - 8 TPI total power requirement: 1,1 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 1,6 x 0,75 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Laser Prima Industrie Model Platinum 9000L 3000x1500 2500W Year 2000 PRIMACH 9000 CNC Pallet change 19,021 hours Generator hours 25.719
used
Chipconveyor 2 steadies - max workpiece weight without steady: 3500 kg - max workpiece wieght with steady: 5000 kg Swing over bed: 920 mm Swing over cross-slide: 550 mm Distance centre tot centre: 5000 mm Spindle cone: ASA 11 Dia of spindle bore: 130 mm Power on the spindle: 22 kW Number of speeds: 8 > 1500 rpm Command: Heidenhain Manual Plus Total power needed: 65 kW Weight: 9100 kg Chuck: dia 800 mm
used
Tecna Saima Vortec Cook Quench Chill System – Vortex D1 Mono 900 3 Beautiful condition. Fully automatic system Suitable for pasta, rice, noodles, pulses, grains, potatoes, vegetables, seafood etc. 90 litre baskets system
used
Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...
used
Number of working hours: 3336 h : 55kW/2400 rpm serial number: 8CU4465 bucket: Klappschaufel 0,75m³ : Gabelträger : . weight: 5630 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Turning diameter : 670 mm Maximum turning diameter : 330 mm Maximum turning length : 551 mm X axis movement: 160 mm Z axis movement : 425 mm Double chuck Single turret C-Y axis Machine is in excellent condition
used
Artec line Artec Model 900 extrusion line Model 900 125mm auger
used
Description Very well-preserved high-performance roller lathe WALDRICH SIEGEN. Refurbished in 2012 for € 595,000.00, with R&D control and functional guarantee. Details Type WKDF 900/15 Kop. Machine number 14183 Built in 1971 Bed width 1,610 mm Bed height 670 mm Bed length 7,670 mm Headstock center height 600 mm Face plate Ø 920 mm Clamping range 200 - 630 mm Support max. copying depth with largest turning diameter 250 mm Tailstock quill adjustment 100 mm Quilles Ø 300 mm max. workpiece length 4,000 mm max. workpiece weight 15 tons Additional Accessories Copying Device incl. documentation
used
This STYLE 750 (900 dbc) Lathe was manufactured in the year 2020 in the Netherlands and has 413 production hours. The machine has a spindle speed of 2000 rpm. The Original PDF of the machine is attached. See below for further details.
used
Manufacturer GEMINIS Model GHT-5 G2 1000 x 9000 Year 2.007 CNC HEIDENHAIN 4110 MANUAL PLUS Capacities and feeds Max. swing over Bed Ø 1.000 mm. Max. swing Ø 1.000 mm. Max swing over cross slide Ø 680 mm. Center height 500 mm. Distance between centres 9.000 mm. Rapid feed (X/Z) 8 m/min Main Spindle Turning speeds 0-1400 rpm Quill travel 102 mm. Spindle nose DIN-55026 -B11 Spindle automatic ranges 4 Main spindle power 37 kW Turret Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tools power 5.5 kW Tailstock Tailstock quill travel 300 mm Ø tailstock quill 140 mm Max weight between centres Without steady rest 4.800 kg With 1 steady rest 5.500 kg With 2 steady rests 6.200 kg Extra Equipment C Axis and driven tools INCLUDED 1 Axial driven toolholder INCLUDED 2 radial driven toolholders INCLUDED 25 tool holders (VDI 50) INCLUDED 10 set of Jaws ...
used
Crate nailing machine Bohm and Kruse Type: III 12/900 Machine No. 812 Working width 900 mm Working height adjustable from 0 - 700 mm 12 nail feeders 7 hammers (12 hammers possible) 2 shaker box Motor power 2.2 kW Weight 2,200 kg Dimensions 2000 mm x Depth 1800 mm x H 2200 mm
used
Reflective light barrier, light barrier -10-40 V DC -Price: per piece -Number: 5x available -Weight: 0.3 kg
used
Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses