volumetric used for sale

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

Side channel blower EG&G ROTRON DR068DJ9Y Volumetric flow: 21.6 m3/h 75 watts 110 / 220 V (luminous flux) Dimensions: 220 x 190 x 180 mm

Manufacturer: KIPSZER Type: CK 31/4 Volumetric flow: 690-1100 m3/h Power: 0.25 kW speed: 1400 rpm voltage: 220-380 V frequency: 50 Hz used, tested !

Manufacturer: VEM Type: LRH 90/1 Volumetric flow: 0.03 - 0.11 m3/s Total pressure increase: 5120 - 2060 Pa Power: 1.1 kW Speed: 2800 rpm Voltage: 220-380 V Dimensions: approx. 800 x 800 x 450 mm used, tested !

Welding fume extraction LINCOLN NORWELD SP-3M Volumetric flow: 300 m3/h motor: 2.2 kW 380 V Dimensions: 1200 x 630 x 870 mm used, tested !

Welding fume extraction KEMPER 91710110 built: 1996 Operating hours: 12880 h Volumetric flow: 240 m3/h 1,1 kW 230 V Dimensions: 620 x 350 x 640 mm used, tested !

Welding fume extraction LINCOLN NORWELD DF-500 Volumetric flow: 500 m3/h System pressure: 1000 mm/Wg ( millimeter water column ) - approx. 0,0,098 bar Fan speed: 9200 rpm operating voltage: 380 V 3AC Power consumption: 5.5 kW Connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm Engine: ATB 132S 5,5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm

Hydraulic power unit, universal power unit, with tank, mobile HANSAFLEX pump: VICKERS VVA20FR C D WW20 Operating pressure: 100 bar Volumetric flow: 19 cm3/U 1br />Tank: approx. 250 l Operating voltage: 400 V 3AC 50 Hz Engine: SIEMENS 1 LA5113-4AA21 4,0 kW

Compressed air microfilter, compressed air sub-microfilter, with automatic float arrester and wear indicator PARKER, DOMNICK HUNTER AAP025DGFI Working pressure: 1 - 16 bar Volumetric flow 216 m3/h Connection thread 3/4 installation length: 120 mm filter cartridge: P025AA New ! with documents ! Dimensions ( compressed air microfilter ): 340 x 120 x 115 mm Dimensions ( packaging ): 570 x 135 x 135 mm

Compressed air microfilter, compressed air sub-microfilter, with differential pressure indicator PARKER, DOMNICK HUNTER AA025DGFX 604432401 Working pressure: max.; 16 bar Volumetric flow: 108 m3/h Connection thread 3/4 installation length: 100 mm Differential pressure indicator DPM New , with documents !; Dimensions (filter): 265 x 98 x 85 mm Dimensions ( packaging ): 390 x 100 x 100 mm

Return filter, for direct tank construction, with maintenance indicator REXROTH ABZFR-S0050-10-1X/B-B R900229572 operating pressure. max. 25 bar Volumetric flow: max. 450 l/min Filter fineness: 10 μm Filter diameter: Ø 71 mm Flange: 88 x 92 mm hole spacing: 71 mm hole diameter: Ø 5 mm Connections: G 3/4 ( inch, input ), R 1 ( inch, output ) New ! Dimensions: 310 x 180 x 100 mm

Micro-S-Filter ORSTA, SOMMERMEYER MS10 Volumetric flow: max. 10 l/min Nominal pressure: 1,1,6 MPa ( 16 bar ) Screen mesh size: 63 μm Connections: M18 x 1.5 Flange diameter: Ø 80 / 110 mm bolt circle diameter: Ø 95 mm 4x bore: Ø 6.5 / 11.5 mm New ! Dimensions: 110 x 110 x 72 mm

High-pressure filter ROEMHELD, HILMA, STARK 3887-067 FA1803144 max. operating pressure: 350 bar max. Volumetric flow: 25 l/min Filter capacity: 10 μm Filter material: stainless steel Housing material: Stainless steel Connections: 1/4 ( inch ) New ! Dimensions: 54 x 30 x 30 mm

Centrifugal fan, centrifugal fan, centrifugal fan LOHER N-355-B ex Volumetric flow: 6000 m3/h Total pressure increase: 1100 Pa ( 0,0,) 011 bar ) impeller speed: 1415 rpm Fan wheel diameter: Ø 500 mm Induction: Ø 350 mm, with adapter to 460 x 460 mm flange ( suction ): Ø 420 mm, flange adapter: 500 x 500 mm output: Ø 350 mm, with reduction to 340 x 270 mm flange ( outlet ): Ø 420 mm, flange reduction: 420 x 350 mm engine : ENGV-112MB-04M 3,6 kW 1415 rpm 380 / 660 V 3AC IP54 used, tested ! Dimensions: 1250 x 1000 x 820 mm

Directional control valve, hydraulic valve REXROTH 4 WE 6 HA62/EG24N9K4/V R900554556 Volumetric flow: max. 80 l/min operating pressure: max. 350 bar with 1 control solenoid 24 V DC used, tested ! Dimensions: 150 x 45 x 90 mm

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR Karl W. Müller Type: D - 07 Speed fan wheel: 2850 rpm Fan wheel diameter: Ø 180 mm Volumetric flow: 41 m3/min Total pressure difference: 1.1.1 2 kPa ( 0.012 bar ) Induction: Ø 180 mm with intake housing 330 x 198 mm Output: 170 x 150 mm Flange ( outlet ): 210 x 192 mm hole spacing: 160 / 180 mm hole diameter: Ø 10,5 mm Motor : 1.8 kW 2850 rpm 220 / 380 V 3 AC 50 Hz IP44 used, tested ! Dimensions: 640 x 380 x 360 mm

Hydraulic pump with motor, axial piston pump NACHI UPV-1A-22N1-22A-4-4412H pump: PVS-1B-22N1-U-12 Volumetric flow: 10,5 gpm ( 29.7 l/min ) Pressure: 3625 psi ( 250 bar ) Pressure range: 286 - 1000 psi ( 19.7 - 68.9 bar ) Displacement: max. 22 cm3 / U Speed: max. 2000 rpm motor: TOSHIBA Type: IK FCKLA21 100L 2.2 kW 1400 / 1680 / 1710 rpm 200 / 200 / 220 V 3AC 50 / 60 / 60 Hz IP44 New ! Dimensions: 480 x 260 x 200 mm

Hydraulikpumpe ORSTA, VEB HYDRAULIK NORD Type: CA 0,CA 0,4 ( CA0.4 ) TGL 17-747404 Volumetric flow rate ( V ): 0.4 m3/h Discharge pressure ( p ): 1.0 MPa ( 10 bar / 10 kp/cm² ) Nominal speed ( n ): 1425 - 1450 rpm shaft diameter: Ø 10 mm Wavelength: 23 mm Groove width: 3 mm Pump base: 95 x 98 mm hole spacing (parallel to shaft): 70 mm hole spacing ( transverse to shaft ): 70 mm hole diameter: Ø 7 mm New ! Dimensions: 160 x 145 x 120 mm

Compressor, screw compressor ATMOS SE 440 ( SE440 ) Year: 2005 Operating hours: 9299 Final compression pressure: 8 bar Volumetric flow: 7.4 m3/min 46.5 kW 400 V used, top condition ! Dimensions: 1800 x 1600 x 2300 mm

Compressor, screw compressor ATMOS SE 440 ( SE440 ) Year: 2005 Operating hours: 3735 Final compression pressure: 8 bar Volumetric flow: 7.4 m3/min 46.5 kW 400 V used, top condition ! Dimensions: 1800 x 1600 x 2300 mm

• Non-EX version • Drum fully perforated with mixing paddles • Drum useful volume 331 litres, drum diam. 1,450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Volume flow 2,000-4,500 m3/h • 6 spray nozzles with peristaltic pump, spray rate 250-1050 g/min, • Drum drive Motor power 1.5 kW, speed 1.5-13 rpm • Antifreeze heater 68.1 kW • Dehumidification in 2 stages, cooling capacity 75.2 kW, aftercooler 24.3 kW, residual moisture at outlet 2 g/kg • Humidification Preheater heating capacity 53 kW • Main heater Heating capacity 140 kW, air temperature at outlet +90° C • Supply air fan max. volume flow 4,500 m3/h, motor power 7.5 kW • Supply air filter 3 stages M6, F9, H13 • Exhaust air fan max. volumetric flow 4,500 m3/h, motor power 22 kW • Exhaust air filter H13 • Cleaning nozzles Drum outside 2 x ...

Compressor Kaeser DS 200 ( DS200 ) Volumetric flow: 16,75 m3/min Discharge pressure: 10 bar Operating hours: 110372 Load hours: 7436 Drive power: 110 kW Weight: 2.3 t Year of construction: 1993 used, tested ! Dimensions: 2400 x 1630 x1820 mm

Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 2x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Centrifugal fan, centrifugal fan PILLER 58463 MN 80500 Year: 2000 Volumetric flow: 2,2,333 m3/s inlet diameter: Ø 500 mm inlet flange diameter: Ø 590 mm outlet: 500 x 400 mm outlet flange: 610 x 505 mm engine : 15 kW ABB 400 / 690 V New ! Dimensions: 1460 x 1170 x 1470 mm

Centrifugal fans, centrifugal blowers, centrifugal high-pressure fans with belt drive ELEKTROR Karl W. Müller Type: HRD 2/4 Speed fan wheel: 5130 rpm Fan wheel diameter: Ø 350 mm Volumetric flow: 17 m3/min Total pressure difference: 7.7 kPa ( 0.077 bar ) Induction: Ø 110 mm Output: Ø 80 mm Flange ( outlet ): Ø 165 mm Motor : 2.6 kW 2860 rpm 220 / 380 V 3 AC 50 Hz IP54 used, tested ! Dimensions: 550 x 530 x 560 mm

Axial fan, axial tube fan, with adjustable blades VEM, TURBOWERKE Meißen LANN 630 TGL20-10/68 Volumetric flow: 16900 - 22700 m3/h Total pressure increase: 66 - 42 kp/m² Density: 1,2 kg/m3 Temperature range: -25 - 40 °C impeller: Ø 620 mm Inner diameter: Ø 630 mm Motor: YMR 112 M4 A 5.5 kW 1440 rpm 380 / 660 V 3AC IP44 New ! Dimensions: 680 x 680 x 540 mm

Axial fan VEM, TURBOWERKE Meißen LANV 630 Volumetric flow: 6234 - 10500 m3/h Total pressure increase: 26 - 9 kp/m² Density: 1,2 kg/m3 temperature: 20 °C impeller: Ø 620 mm inner diameter: Ø 630 mm motor: YMR 80 K6 0,75 kW 930 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested ! Dimensions: 810 x 810 x 350 mm

Axial fan VEM, TURBOWERKE Meißen LANV 630 Volumetric flow: 9365 - 15200 m3/h Total pressure increase: 58 - 24 kp/m² Density: 1,,2 kg/m3 temperature: 20 °C impeller: Ø 620 mm inner diameter: Ø 630 mm motor: YMR 100 S4 3,0 kW 1430 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested ! Dimensions: 810 x 810 x 430 mm

Centrifugal fan, centrifugal fan VEM, VENTILATION SYSTEMS Berlin LRMNA400/1W TGL 38204/01 Volumetric flow: 1,58 - 3.39 m3/sec Total pressure increase: 1295 - 855 Pa Density: 1.2 kg/m3 temperature: 85 °C impeller: Ø 600 mm Motor : KMR 112 M4 ( KMR112M4 ) 4,6 kW 1435 rpm 380 V 3AC 50 Hz IP44 Intake opening: Ø 400 mm Output: 350 x 350 mm / Ø 400 mm used, tested ! Dimensions: 760 x 700 x 830 mm

Axial fan, axial duct fan VEM, TURBOWERKE Meißen LANVR250 Volumetric flow: 508 - 778 m3/h Total pressure increase: 7 - 3 kp/m² Density: 1,,2 kg/m3 temperature: 20 °C impeller: Ø 240 mm inner diameter: Ø 250 mm installation length: 125 mm engine: YM 56 K4 0,12 kW 1360 rpm 220 / 380 V 3AC 50 Hz IP44 New ! Dimensions: 300 x 240 x 300 mm

Axial fan, axial tube fan, with adjustable blades VEM, TURBOWERKE Meißen LANN 630 Volumetric flow: 2.83 - 4.25 m3/sec Total pressure increase: 575 - 245 Pa Density: 1.2 kg/m3 Temperature: -25 - 40 °C impeller: Ø 620 mm Inner diameter: Ø 630 mm installation length: 315 mm Engine: YMB 100 L4 2,7 kW 1435 rpm 220 / 380 V 3AC 50 Hz IP44 New ! Dimensions: 685 x 685 x 500 mm

Gear pump, positive displacement pump, with regulating valve DUDEK-PUMPEN Type I/b Volumetric flow: 6,6,0 m3/h Discharge pressure: 2.0 bar Nominal speed: 1450 rpm Power requirement: 1.4 kW recommended motor power: 2.0 kW Connections: DN 50 / DN 40 Shaft: Ø 19 mm Wavelength: 36 mm groove width: 6 mm New, with underlays ! Dimensions: 280 x 175 x 285 mm

Lubrication pump with motor SAXONIA, VEM, ELMO APZ 2,5 B ( APZ2,5B ) Volumetric flow: 0.25 l/min Nominal pressure: 1.6 MPa (16 bar) Motor: VEM 1160.1/1 60 W 1400 rpm 220 / 380 V 3AC IP 44 used ! tested ! Dimensions: 250 x 110 x 125 mm

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

Make: Future Tech Model: Twin Screw PET / PP / PS Extrusion Line Condition: Excellent – new after testing. Availability: Immediately Materials: PET / PP / PS (Virgin and Recycled Flake) Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 1100mm Output: 1000kg/hour Main Extruder: 95mm Future Tech UV95 twin screw extruder water cooled Co-Extruder: 65mm Future tech single screw with 30kW ac motor & invertor Running from 0.18mm to 1.2mm thick PET up to 1000kg/hr. Mix of virgin, post consumer bottle flake and skeletal flake. 2 Component volumetric blending system for primary and secondary extruders. 95mm Future Tech UW95/44 twin screw extruder water cooled. 250kW ac motor with inverter drive. Triple vented with liquid ring vacuum pump system. Hydraulic screen changer, dual piston, filter dia Φ180mm, manual control. JCTimes model 275 gear pump with ac motor and  ...

damper actuator, actuator, valve actuator, with volume flow controller BELIMO NM24-V/180 torque: 8,0 Nm Positioning angle: 0 - 90 ° Operating time: 110 - 150 s Power consumption: 4.5 VA, 2.5 W Operating voltage: 24 V AC 50 / 60 Hz Hollow shaft: Ø 22 mm ( 12-edge profile ) Volumetric flow controller: VRD2 TR Power consumption: 3.0 VA, 1.3 W Operating voltage: 24 V AC 50 / 60 Hz approx. 1.8 m Connection cable used ! Dimensions( damper actuator ): 145 x 80 x 60 mm Dimensions( volume flow controller ): 155 x 125 x 55 mm

pneumatic rotary actuator, rotating high-pressure sealing, dynamic high-pressure sealing HAMMELMANN 00.00124.0100 pmax: 3000 bar Volumetric flow: 40 l/min Drive power: 1.0 kW speed: 1000 - 3000 rpm air pressure: max. 6 bar air consumption: 72 m3/h shaft diameter: Ø 13 mm, Shaft length: 12 mm Thread: M55 x 2.0, Length: 10 mm Base body: Ø 75 mm, Length: 140 mm New ! Dimensions: 200 x 130 x 90 mm

Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112

Unrenovated blown film line directly from production, make extruder Alpine HS 75 L/D 24, with 4 volumetric dosing stations, die head tool type BK 14-36 IBC, cooling ring HK 300 with peak, capacity up to 175 kg/h, film thicknesses variable depending on polymer, for HD-PE 12 ym – 50 my, corona treatment, film slitting knife, thickness measurement, film flattening, film widths 840 – 1,200 mm, tandem winder made by Kuhne, the technical equipment has improved over the years. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Key data: 75 mm, 24

Blown film extruder for mono films TOP version Manufacturer Alpine BJ 1989 has already been partially modernized. Screw length 24d Screw diameter 75mm Blowing head BF 14-36 internal cooling from Alpine Cooling ring HK 300 with peak Output approx. 175 kg depending on the product Film thickness 12my – 50my Dosing Dosing unit with 4 volumetric feeders Winder Kuhne 1300mm Tandem Pre-treatment available 1 time Slotting device is available Flat laying 840mm – 1200mm Thickness measurement is available

Machine Speed : 2500 pots per hour (depending on container specification and product viscosity) Fill Range Main fill, pre-fill and post-fill filling systems 70 to 568cc each Dosing Range : Small dosing 0 to 100cc each Pot Diameter : Maximum 125mm Pot Height : Maximum 125mm Power Supply : 380-415V / 3 Phase / 50-60Hz + Earth + Neutral Air Supply : 6 Bar at 150L/min NovaPak D2500 is a flexible, compact, automatic rotary filling and sealing machine, fully enclosed using minimum floor space. It can cater for various size and shape of container and offers a machine mounted container dispenser unit and location system to accurately control container stacks. A detection system is integrated as standard to offer ‘no-container; no-operation’ facility The machine includes a filling system (manufactured from 316 grade stainless steel) complete with product tank. Interchangeabl ...

NEW packaging machine for preformed trays with aroma protection lid between 100-150 gr. The machine was never used and it was bought in 2015. It can fill 2 trays at a time with volumetric dispensers, performs the vacuum and the introduction of the inert gas, welds the upper seal film and puts the aroma-saving lid on. The machine is equipped with a loader for the trays and a loader for the lids. The productivity of the machine is about 20 trays per minute, equal to 1,200 trays per hour. The machine is completed by an automatic labeling unit, capable of affixing 2 labels, one on the bottom of the tray and one above the aroma-saving lid. The labeller is equipped with an ink jet marker for batch and expiration, and has a rotating accumulation plate for the labeled and marked trays. The machine was exclusively used for initial commissioning, but it never produced anything. The inert ...

Galdi filler for food liquids, milk-juice-yogurt-etc. Machine filling 2,000 liters per hour in gable top carton, fed with folded containers that are automatically formed, seals the bottom filled with product, extracts the possible foam and seals the canopy. Later drag gravel on batch and date fire. Polyethylene drag chain. Volumetric dispenser with piston. Product tank Stainless steel 26 liters and level check by probes. With connection pieces for cleaning in place. Structure entirely in stainless steel. Made in europe with eec / 89/392 standards. Riempitrice automatica gable top filling machines

Selling a Fillog dosing machine in very good condition: Hourly capacity 150 kg Ideal for fruit puree Performance: 200-600 bottles/h Nominal performance: 300 L/H Electric demands: 0.1 kW, 24 V Material: WNr. 1.4301, AISI 304 stainless steel. food industrial PP Dimensions: 350x1100x1250 mm Weight: 40 Connections: DN 65 IP6S certified electronics Filling type: Volumetric Filling accuracy: + - 0.5% Filling temperaturg: 0-100°C Filling range: 5g-35.000g

Use: The machine is made of stainless steel, it is suitable for use in food, cosmetic and chemical operations. (Not suitable for explosive atmosphere) The machine is suitable for filling liquids with low and high viscosity. E.g: - Water, sanitizing agents, paints, creams, dairy products, sauces and flavorings, spreads, salads, delicate meat mixes, etc. Function description: The machine doses the product on the principle of volumetric dosing. The machine can be equipped with a weighing platform for mass dosing. The tank is filled with the dosed product, it can be filled manually or with the help of a refilling pump, for which a flange is prepared in the lid (a level sensor for automatic refilling can also be connected). The dosing unit takes the product from the tank and pumps it through the pipe to the nozzle. The nozzle will be manufactured according to the specifications of the ...

Eppendorf epMotion 5075 Automated Pipetting System The Eppendorf epMotion® 5075 automated pipetting system is a high-performance workstation thats capable of handling all pipetting and dispensing tasks in the laboratory. This volumetric dispensing system can be integrated easily in the work environment and provide an economical solution for these time-consuming, delicate jobs, so that personnel can spend more time on other laboratory work. The modular design of the entire epMotion® range also lends itself to a wide variety of options, extending its implementation possibilities enormously.

AMUT TWIN SCREW EXTRUDER FOR PIPES/PROFILES, Type BA92/22, constructed in 2004, parallel counter-rotating screws diam. 92 mm 22L/D, new screws and barrel, used for PVC window profiles, D.c. 59,5 kW drive, including 2 volumetric dosing units

Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.

AMUT BA92, Built in 2000, Twin-screw extruder with 2 Ø 92 mm screws. 22 L/D, n.2 volumetric dosing units, 59.5 kw motor, Electric cabinet and control panel, CE certification, manual and diagrams, Machine in very good conditions, Throughput with PVC profiles: approx. 250 kg/h