volta used for sale

Remanufactured Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Description The Mark Tecno MCM Model 3 EEN ID 0078 Status Active Location Oradea (RO) Electric Rotisserie Tecno MCM 3 EEN with a capacity of 18 Cubs, power: voltage: 14.4 kW, 400 V, dimensions (L x w x h): 1098 x 480 x 820 mm, weight: 80 kg. Missing string, otherwise it's perfectly functional. ExWorks. Price is negotiable and do not include VAT. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Watching the product schedule 24 hours prior. We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V nominal suction digesters: 300m3/h End pressure: 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

- Working range X - Axis 1300 mm- Working area Y - Axis 1300 mm- Working area Z - Axis 200 mm- Working accuracy -+0.04/300 mm- Vacuum - Scanning table with 4 sections and T-slots including vacuum pump- Max. Travel speed 10000 mm/min- Max. Working speed 6000 mm/min- milling spindle motor 2.2 kW / ISO 20, water-cooled tool changer 6-fold, side-collet tool holder diameter 3, 6, 8,10,12 mm- speed Milling spindle 6000-18000 rpm- Drive motors stepper motors- Voltage 400 V/50Hz guide in X,Y Direction linear guide + rack guide in X, Z-direction linear guide + ball roller spindle- command language G-code- DSP control NK 105 (option: Mach3 control, PC and Monitor)- CAD/CAM Software Vectric CUT2D PRO (NESTING Inclusive)- Workpiece positioning, pneumatically lowerable stops 1 x pieces in X ,2 pieces in Y- tool lengths Sensor safety light barrier regulation according to EN 848-3 (optional one-sided,  ...

Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use

Steam turbine Type: B + V, MARC2 - B10, back pressure with extraction Live steam pressure 58 bar 60.5 bar max Live steam temp.: 510 ° C Steam quantity: 45 t / h Extraction pressure: 21 bar 24.0 bar max Extraction temp.: 383 ° C 490 ° C max Extraction quantity: 7 t / h t 15 / h max Exhaust pressure: 3 bar 4 bar max Exhaust temp. : 180 ° C 262 ° C max Exhaust quantity: 28 t / h 47 t / h max Speed: 10.043 RPM Quick closing speed: 11,047 RPM Gearbox Generator Manufacturer LEROY SOMER KV voltage 5.25 Frequency 50 Hz Speed of 1,500 RPM maximum 1,800 RPM Power: 9,000 kVA Power factor: 0.8 Year of construction 2005 Operating hours: 16,000

NTS 200 Wet grinder Grinding wheel diameter 200 mm Grinding wheel width 40 mm Honing diameter 220 mm Honing wheel width 30 mm Speed 120 min¯ ¹ Power drive motor 0,12 kW Power output drive motor 0.06 kW Supply voltage 230 V 50 Hz Motor speed 1400 348 mm, width / depth length 285 mm, height 275 mm Length max 460 mm, width / depth 380 mm, height 435 mm Weight 9.2 kg G & pieces 5750200 Option: Stand with door

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

Offer Used power generation aggregate D 250-4 IWE according to ISO 8523 of Kirsch, BJ 2003, Executive class according to ISO 8528 â 1: Application by 6280-13:2/A4 VDE 0108 Nominal power: PRP 200 kW, nominal voltage: 400 V, nominal current: 361 A, Nominal frequency: 50 Hz, nominal speed 1500 min-1 New price: From â?¬87,130.00 (net) engine: Manufacturer IVEV, No. 594641 Type: GE 82010 Sri 25.01 Power 221, 0 kW, speed: 1500 min-1, cooling system water Generator: Manufacturer Leroy Somer, 1st 150375/1 Power: 315 kVA, voltage 400 V, 3 â 50 Hz Engine hours: 47.57 h Aggregate: Manufacturer: Cherry, No: 4293 Type: D 250-4 IWE The buyer must expertly mine and pick up the plant himself and at his own expense.

NTS 255 Wet grinder Grinding wheel diameter 250 mm Grinding wheel width 50 mm Honing diameter 200 mm Honing wheel width 30 mm Speed 90 min¯ ¹ Power drive motor 0.2 kW Power output drive motor 0,12 kW Supply voltage 230 V 50 Hz Motor speed 1400 Length 380 mm, width / depth 370 mm, height 420 mm Length max 440 mm, width / depth 400 mm, height 490 mm Weight 17 kg G & pieces 5750255 Option: Subframe

Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.

OBSS 100 Spindle belt sander Working table length 430 mm Work table width 410 mm Speed 2000 min¯ ¹ Grinding sleeve diameter 13, 19, 26, 38, 51 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Belt length 610 mm, belt width 100 mm Bandumlaufgeschwindigkeit(en) 8 m/s Surface length 220 mm, width 100 mm Supply voltage 230 V 50 Hz Suction nozzle diameter 38 mm Length 480 mm, height 530 mm, width / depth 480 mm Weight 12 kg G &amp; pieces 5903501 Option: Stand with door

Hardening furnace ZWUT PSK-1 built by ZWUT. It is intended for various types of laboratory and industrial work. Technical data : - power consumed at T = 1350 degrees C: 4,10 kW - installed power: 5.5 kW - power supply voltage: 220 V, 50 Hz - secondary voltage of the autotransformer: 7-41, 1-3-58, 9-5-84, 4 - number of phases: 1 - nominal temperature: 1350 degrees Celsius - temperature control accuracy: 1.5 (or 0.2 + /%, when working with a feedback attachment) - type and number of silites: 8/150/150/10 mm / pcs - warm-up time to T: about 3.5 hours - usable dimensions of the heating chamber (height x width x length): 150 x 150 x 280 mm - furnace weight: 138 kG - weight of the cabinet: 81 kG

New SGB transformers 1000KVA power voltage: 10/20kv - 690V SWITCHABLE other services and voltages also available easy questions! SEE photos was still never used available now 6 PCs of nationwide cheaper delivery issues is always available: Mr Serhan 01727265324 or e-mail: Transformatoren@gmx

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

UTS Separator FSP B-78/15 Bedding-Technical Data Sheet Dimensions/Weight: length mm 2743 width mm 711 Height mm 980 Weight (empty) kg 770 Weight (in operation) kg approx. 850 Schnecke: Material Stainless St./tungsten Carbide Coating Length of auger mm 1160 Active length mm 1099 Screens: Pitch mm 200 Material stainless steel Helix diameter mm 260 length filter screen F mm 520 Helix thickness mm 10 length filter screen FXX mm 260 Number of Helixes 2 length press screen mm 150 Inlet Housing: Diameter screens mm 260 Material Spheroidal cast iron EN-GJS-400-15 screen surface area m2 0.72 Diameter inlet pipe connection mm 100/102 Drive adapter: Dimens. Maintenance opening mm 160 x 220 Material St. Steel/housing Mild steel painted Screen Housing: Bearing 2 taper roller bearings Material Spheroidal cast iron EN-GJS-400-15 sealing system mechanical seal, grease Chamber Lengt ...

Power: 630 kVA / 504 kW Diesel engine (four-stroke) / type / Nr.: / D2842LE201 / 49492832104201 Cylinder: V12 Cooling: water-cooled / E cooler Generator / type / Nr.: Marelli / M8B400SB4B3 / MH16020 Voltage: 400 V / 231 V Frequency: 50 Hz Speed: 1,500 min-1 Type: 20' HC container Tank: approx. 450 LTR. + external diesel intake Switchgear / Starter: Automatic switchgear / electrical Battery voltage / capacity: 24 V Generator switch: Yes Power switch: Yes Automatic: Symap Accessories: - Dimensions (L X W X H): 6.058 x 2.438 x 2.891 mm Weight: 10.000 kg

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped  ...

Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

- Motor grinding roller 5.5 kW motor feed 2 x 0.37 kW voltage 400 V / 50 Hz feed speed 0 - 10000 mm/min- max. Workpiece diameter 100 mm- max. curves Radius 200 mm- min. workpiece length 400 mm- grinding belt dimension 1450 x 100 mm- Dimensions L=1000, W=900, H=1400 mm - weight 680 kg

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must  ...

Pester Pewo-pack 450SN bundle packer for single and multiple cartons with infeed conveyor (1.5m long), turning wheel and PEWO-therm III 450 E shrink tunnel Infeed width from 82 - 205mm Infeed length from 84.5 - 245 mm Infeed height from 59 - 87 mm Maximum collation width 450 mm Suitable for film types PE, PP & PP stretched, film width from 50 mm up to 450 mm, film thickness from 0.025 to 0.100 mm, roll diameter max. 300 mm, roll core diameter 70/76 mm, connection voltage 3 x 400 V + N + PE / 50-60 Hz, Power consumption 9.0 kW / 14.5 A, operating pressure 5 bar, machine base area approx. 4930 x 1230 mm(LxW), infeed height 900 mm, outfeed height 900-950 mm, machine net weight approx. 1,350 kg, output up to 24 cycles per minute

Technical data: - working width 300 mm- glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rolls made of stainless steel- CE Conformity dimensions: 800 x 600 x 500 mm- Weight: 60 kg

Description Brand Garbin Model 43 DX UMI / 83 LI ID 7083 Status Active Price 560 € + VAT Year of manufacture 2006 Location Oradea, Romania - Capacity: 4 trays, 432?343mm - perfect for cooking a variety of bakery products, semi-cooked food, as well as, fish, meat and vegetable products. - Size: Length - 600mm, depth - 595 mm height - 560 mm. - Full stainless steel casing, mechanical control system. Details Fermenter: - 8 trays capacity - 220-230 V voltaje - 1,5 Kw power consumption - Size: Length: 600mm depth: 630 mm height 915 mm - Weight: 38 kg ExWorks Oradea, price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. ( ...

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

Technical data: - working width 300 mm- 2 x glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 2 x 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rollers made of stainless steel- mechanical height adjustment of the upper glue application roller- mechanic digital display of the passage height- CE conformity

Storage tanks, 10,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. incl. mounting a console at above tank, incl. suction pipe 1 1/4 "as well as corner check valve with adjustable lift protection 1.5 3.0 m The container is externally repainted in RAL7042, traffic grey. (On request, we paint the tank in your House Paint / RAL tone) L = approx. 5.30 m + ...

COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON Valpak ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 sac rotund de deseu maruntit = 36 baxuri de carton necompactat 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 sac rotund de carton va avea 300/400 kg, de ladite 300 kg, plastic 200/300 kg 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Echipamentul standard are: Celulă fotoelectrică, sistem de debavurare automat, senzor op ...

- automatic loading via conveyor belt- max. press length 2500 mm- max. workpiece width 100 mm- max. workpiece height 80 mm- max. working pressure 7500 kg- motor hydraulic pump 4.0 kW- motor feed 0.75 + 1.1 kW- motor Off longitudinal sealant 2.2 kW- voltage 50 Hz, 400 V- total power 9.15 kW- speed saw 2800 rpm saw blade FI 350 mm, bore 30 mm- feed speed 30 - 60 m/min compressed air requirement 8 bar- Dimensions L=3960,W=1400, H=1800 mm- Weight 1200 kg

BITZER LHV6/2DES-3.F1Y-40S Brand:BITZER Type:LHV6/2DES-3.F1Y-40S Stock number:M20-1244 Cooling capacity:9 kW Number of fans:2 Displacement:13,4 m³/h Refrigerant:R134a, R407C, R449A, R452A Refrigerant Content:13 l Voltage:230 / 400 Volts Motor power:2,2 kW Dimensions:1400 x 650 x 1400 mm Weight:270 kg Year:2015 New/unused Number in stock:2 piece(s) Price: Quotation request Description: New unused Bitzer inverter condensing unit, complete with controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C when using R134a. (When using R452A: Q= 3.7kW at Te= -30°C and Tamb= +40°C). Please visit our website: used-refrigeration

- Motor grinding roller 4.0 kW motor feed 0.37 kW motor oscillation 0.18 kW voltage 400 V / 50 Hz feed speed 0 - 10000 mm/min- max. Working height 100 mm- max. working width 250 mm- max. curves Radius 200 mm- min. workpiece length 400 mm- grinding belt dimension 3050 x 100 mm- grinding roller diameter 250 mm- air grinding roller diameter 200 mm- air grinding roller diameter 100 mm- mobile- Dimensions Packaging: L=900, W=1600, H=1400 mm - Machine dimensions: L=1200, W=1600, H=1400 mm - Weight 750 kg

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Pump: centrifugal pump Manufacturer: Varisco Type: J40/J1-110 Year of construction: 2002 Capacity: 10 m3 / 13m / - 20 m3 Engine: Siemens KW: 1.1 Voltage: 380 V Speed: 2850 RPM Connection inlet DN 40 Port side: DN 40 Machine number: 107921 Dimensions: length 700 mm Product-contacting parts: stainless steel

Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Profile Projector ISOMA M 108 A / Suisse manufacturer: ISOMA type: M 108 A mach.-Nr.: 866477 comm.-Nr.: 0202/050/130/0382 stock-Nr.: 1835 + Regular Price: 4.680,- € > Reduced Price: 2.340,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) screen width: 550 mm screen height: 450 mm object table length: 170 mm object table width: 150 mm travel legth: 40 mm travel width: 15 mm glas table Ø: 85 mm voltage: 220 V / 50 Hz weight: 280 kg standing area: W 1.000 x D 800 x H 1.800 features Screen Size W 550 x H 450 mm object glas table insert vertical sled table micrometer spindle for legth and  ...

System: diaphragm pump Type: LEWA G3H M511S Gr. 30 Description: with diaphragm pump head, material stainless steel Year of construction: 2002 / refurbished 2008 Stroke length: 30 mm Hubfreqquenz: 175 min1 Rod power: 16000 (N) Measuring current at pmax: 170 (ges. 510) l/h Max.Zul. working pressure: 250 bar at least. suction flange pressure: 1.0 bar Connections: Suction and pressure side DN 15 Pump body: Stainless steel 1.4571 Diaphragm: PTFE Guide / ball: 1.4581 / 1.4301 Speed: 1440 RPM Power: 7,5 kw Voltage: 230/400 Technical documents: Yes

Used SHREDDIES production line Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: 5-station SHREDDIES production line Year: 2016 Description: A five-line production line for multilayer flakes from crushed grains. Finished product capacity: 700 kg / h Line speed: 54m / min. Finished product density: 200> 220 g / l Overall dimensions and setting of the machine: length x width x height: approx. 10929 x 1600 x 4685 Design diameter of the grinding roller: 203 mm Design working width of the chopping roller: 210 mm Rotational speed of the grooved roll: 20-85 m / min. Design number of positions: five (four working, one spare) Design width of cutting station conveyor: 230 mm Nominal design width of the edge trim: 12 mm per edge, total 24 mm Design product size: approx. 25 x 25 mm Technical data: Dimensions (length X width X height): Power supply: 400 V, 3 phases, 50 Hz Control v ...