volt used for sale

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI IF Special machine for chairs automatically cuts and bores all type of parts of chairs and furniture components . composed by : - circular saw diam.mm.350 motor power hp 3 - boring unit ( boring head with 5/7 mandrins ) motor power Hp 3 max. working stroke of boring unit mm. 130 net weight kgs.400 Volt. 380/50

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

CARVING machine type ANDREONI STANDARD AL 12 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.12 spindles distance betwen spindles mm. 300 n.02 rotation speed of spindles rpm 12.000 / 18.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5100 x 3100 H=mm.1500 ( machine assembled )

SPINDLE MOULDER Type SAC SUERI TS 110 motor power Hp 5,5 volt. 380/50

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Scrubbing machine Gansow 51 BF 70 Manufacturer: IPC Gansow Dealer: reiko GmbH Model: 51 BF 70 Machine number: 52 0223 081 Rated voltage: 24 volt Year of construction: 1991 Scrubbing machine with battery charger! Machine is no longer fully operational, can be fixed with little effort or used for spare parts. New price: approx. 8,000

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

fat baking plant Delivery time: 2 weeks Cart/Trolley: 1 loader/Kipptrögel: 10 Total length without storage: 1280 mm Total height: 1075 mm Total width: 820 mm Total length with tray: 2350 mm Total weight: 220 kg Volt / heart: 3 x 400 V / 50 Hz Power supply: 8.6 Capacity: 60 PCs Oil capacity: 67 ltr. Capacity of the trolley: 600 PCs. depending on the weight Operating instructions: german Description Digital display for the oil heater digital display for the fermentation Chamber button for lifting the basket button for lowering the basket

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Mercury vapor lights to illuminate large halls Manufacturer: May Type: HQ 10/250 Technical data: Power: 250 Watts Voltage: 230 Volt Frequency: 50 Hz Lamps are waste. Therefore, these are inexpensive to make. They are fully functional and in very good condition!

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Max temperature: 650 ° C Dimensions: Inside dimensions (Wxh): Ø 260 x 700 mm Dimensions (Wxh): Ø 700 x 1400 mm Connection: 380 Volt / 8 kW Machine weight: 300 kg

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle drive ensures  ...

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Bühler in Flowbalancer donor MAZF 15 (5 piece) 220 volt, 50 heart, Masch.Nr.: 544647 / 10 254 200 now available Mob. + 491715213204

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

AUTOMATIC GLUE SPREADER type OMMA OPEN 1400 year 2003 CE mark : YES technical details : useful working width mm. 1400 max. working thickness mm. 80 working speed : 18 mt/min. spreading rollers diam.mm.250 dosing rollers diam.mm.185 installed power kw 1,6 weight kgs. 1200 volt. 380/50 standard details : - separate electric box - automatic cleaning device for spreading rollers - pressure-free side seals with antifriction flanges to avoid any overheating when long shifts and high working speeds are involved too - careful and sensitive adjustment of the dosing rollers by geardrives - large diameter spreading and dosing rollers - high uniformity of the spreading on full working width - separate gearmotor - collecting tank of the cleaning water - electric plant realized in accordance with high standards with low voltage on secondary circuits, all electric components in ...

AUTOMATIC COPY SHAPER machine type BALESTRINI CP 4 second hand machine Technical Details : machine composed by 4 units : 2+2 shaper units max. working useful length mm.2500 max. working width mm. 500 max. working heigth mm. 180 speed rotation shaper units 8500 rpm speed rotation sanding units 3500 rpm hydraulic pump motor power Hp 5,5 net weigth kgs. 3300 Volt. 380/50

FOR SALE 4 UNITS ALFA LAVAL S 826 separator YOB 2005 V 380 Hz 50 TO WHOM IT MAY CONCERN; WE VE COMPLETE 4 SETS ALFA LAVAL S 826 SEPARATOR AT OUR STOCK . WE VE ALSO CONTROL PANEL ELECTRIC BOXES ETC... SEPARATOR BOWLS HAS NO ANY DEMAGES. SEPARATORS ARE IN GOOD WORKING CONDATION. SEPARATOR USED AS OIL SAPARATORS AT PAST TENSE. PLS FIND SPECIFICATION ON BELOW. SEPARATORS ARE READY TO TRANSPORT . MAKER ALFA LAVAL TYPE S826 SERIAL OF NO. S 4135619 / 4135620 / 4135621 / 4135622 YEAR OF BUILT 2005 PRODUCT NO. 881201-06-01 VOLT 380V FREQUIENCY 50 Hz MAX SPEED BOWL 12129 r/min MOTOR POWER 5.5kW MADE IN SPAIN IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services  ...

GRASSO RC7212E Product number:M15-6041 Cooling capacity:109 kW Refrigerant:NH3 Voltage:400 Volt Motor power:75 kW Dimensions:± 5000 x 2600 x 3000 mm Weight:± 6000 kg Year:2000 Number in stock:1 piece Well maintained Grasso NH3 glycol refrigeration plant for glycol output temperatures until -45°C (109 kW). Consisting of: a Grasso RC7212E two-stage piston compressor (frequency driven), Q-plate (Vahterus) glycol/ammonia flooded evaporator, Baltimore evaporative condenser VCL048G and a control box for the whole plant. Please visit also our website: used-refrigeration

AUTOMATIC DOUBLE END TENONER Type GABBIANI TMN 56 . second hand max.opening mm. 3100 min. opening mm.160 max. useful height mm.120 variable feed rate from 4 to 18,5 mt/min Equipped with 3+3 working units - 1+1 scoring unit . motor power HP 1.3 - 1+1 hogging / milling unit . motor power HP 5,5 - 1+1 milling unit . motors power HP 5,5 volt. 380/50

AUTOMATIC HYDRAULIC GUILLOTINE type MONGUZZI TRA 2600 Second hand machine Volt. 380/50 Working conditions : good Technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

New Bosch Starter 24 volt 9 teeth Bosch number 001417001

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions  ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

Electric motor manufacturer Schorch GmbH, Moenchen Gladbach , unused! Three-phase motor with Kaefiglaeufer type KA7 160KW at 500 volts Design: IM B3 with relubrication device; Brass massive 160kw at 500Volt 50 HZ 1485 rpm 120KW at 400Volt 50 HZ 1485 rpm Weight 1.25t Built in 1992 It is a reserve engine that has never been in use. Mass approx.: Total length 1,260mm Zwpaya2p Total width 670mm Total height incl. foot 860mm Length stand 690mm Wide stand 610mm Shaft diameter 90mm Length of the shaft 170mm Wedge width approx. 25mm Connection box at the top Weight 1250kg Other motors available in 500V output. These can also be used in the 400 volt grid or with a transformer / transformer. Trafos can also be found here. 1. Electric motor manufacturer ABB 500 V 50Hz 75kw 112A Cosfi 0.82 992rpm 830kg 2. Electric motor Siemens 500 V 50Hz 132kw 178A Cosfi 0.90 2.982rpm 77 ...

CIAT LGP 120V Product number:M14-4139 Cooling capacity:34,5 kW Refrigerant:R410A Refrigerant Content:3,3 kg Voltage:400 Volt Dimensions:883x798x1201 mm Weight:240 kg Year:2008 Number in stock:1 piece(s) Price:Quotation request Well maintained Ciat water chiller / heat pump with limited running hours. The heating capacity is 40,5 kW at an water outlet of + 45°C. Please visit also our website: used-refrigeration

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

CARVING MACHINE type MARIANI PL 8 I Volt. 380/50 with Inverter rotary device for the simultaneous rotation of the model and the pieces (3D) manual chuck of mandrins unit also to work with flat pieces Technical Data : n. 8 spindles distance betwen spindles mm. 400 rotation speed by Inverter . rpm min. 9600 / max. 17400 max. working length ( on rotation ) mm. 2100 net weigth kgs. 2500 overall dimension mm. 5000 x 3000 H=mm.1500

Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and central point of the train, as well as a  ...