volksmaschine vm used for sale

This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details.

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 610 mm, 508 mm, 610 mm

Hurco VMX 24 with WinMax controller and IKZ With Lehmann 4th axle Year of construction 11/ 2007 Commissioning 2008 Approx. 28000 switch-on hours Machine runs well and can be used immediately. Viewing under power possible by arrangement. Sales on behalf of the customer

Double chamber vacuum machine with double seal and 10 program memory, Machine cycle: 15 - 40 sec, Chamber size: 500 x 620 x 240 mm, Seal bar: 2 x 620 mm, Vacuum pump: Busch RA0100, 100 m³/h, Power: 3 x 400V, 50Hz, 3.5kW, Dimensions: 950 x 1500 x 1100 mm, Weight: 345 kg

x-travel: 762 mm y-travel: 508 mm z-travel: 610 mm control: MAX5 Hurco distance spindle nose and table: 152 - 762 mm Main spindle:: speed mainspindle max.: 12.000 U/min power capacity - main spindel: 13,4 kW max. Torque: 214 Nm tool taper: SK 40 DIN 69871 A work table:: table surface area: 1.020 x 510 mm max. table load: 1.500 kg T-slots: 5 x 18 x 100 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: SK 40 tool diameter: max. 80 / 76 mm tool length - max.: 300 mm weight of tools max.: 7 kg feeds:: rapid traverse X-axis: 38 m/min rapid traverse Y-axis: 38 m/min rapid traverse Z-axis: 32 m/min total power requirement: 24 kVA weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,0 x 4,1 x 2,8 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 20 bar through spindle coolant: Coolant through spindle: Signal-Light: Oil Skimmer: test probe: R ...

This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details.

Offered is a Hurco CNC vertical machining center including spare parts. Travel X/Y/Z: 1270mm/660mm/610mm, table dimensions X/Y: 1500mm/660mm, max. table load: approx. 1360kg, spindle speed: 10000rpm, spindle taper: SK40, main drive power: approx. 18.5kW, tool pockets: 24, feed X/Y: 30m/min, feed Z: 20m/min, rapid traverse X/Y: 30m/min, rapid traverse Z: 20m/min, spindle operating hours counter: approx. 7676h, control: Hurco Ultimax. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, machine weight: approx. 9000kg. Inspection possible by arrangement.

A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible.

Ref.Nr 00933 see video: Name of the system: circular saw Manufacturer: Eisele Model Vms – II – S Year of construction 1988 Table can be rotated up to 45 degrees Clamping 250 mm width Height min. 150mm height Two speeds Can cut with guide or without guide Condition Technically OK

Dissolver VMA Getzmann LC Power 0.3 kW Speed range 0-10000 1/min Timing pulley 50 mm (new) Good ready for use, straight from production

Key data: 350 mm

Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Flat sawing area 45°: 120 x 100 mm Cutting range round: 120 mm Pneumatic saw blade feed Coolant pump / minimum quantity spraying device Pneumatic material clamping Countershafts for sawing stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Offer 24186 Technical data: - Manual saw blade feed - Workpiece covering in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90° around 110 mm - Rectangle 82 x 160 mm - Square 82 x 82 mm - mitred at 45° about 110 mm - Rectangle 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant device - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

General SKU291Y505 MakeVMA-Getzmann TypeDispermat AE5-C No.02868596 Year of construction1996 Main Features MaterialStainless steel Motor1.1 KW Length325 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length325 mm Sizes stirring headDia. 100x 1,5 mm Number of stirrers on shaft1 Motor1,1 kW (380 V, 5100 rpm) With frequency controllercheck Speed mixing shaft115-2815 rpm Mounted on supportcheck MaterialStainless steel 1.4301 (304) General LocationBarneveld With switchgearcheck Floorspace0,9 x 0,8 m Total height1,5 m Weight250 kg Extra information Max dia. Mixing vessel: 350 mm2x Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrgani ...

10 machines in stock EISELE high-performance circular sawing machine VMS 350 das ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 350 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 X 8 / 120 x 100 Smaller cross-sections on request. With pole-switchable three-phase motor, 1.4/1.9 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Spare parts supply for 10 years. Standard version with 17/34 min-1 or 34/68 min-1 Standard version, models differ in the type of cooling

Manufacturer: FERMAT Model: VMF 1000 CNC Year: 2008 Condition: Used Stock number: 9494 Control System: FANUC Series Oi-MC Switch-on hours: 25998 h Work table length: 1300 mm Work table width: 600 mm Spindle drive power: 15 kW Speed: 10000 1/min X-axis travel: 1006 mm Y-axis travel: 598 mm Z-axis travel: 600 mm Machine weight: 5000 kg

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg

LINCK VM50 sawmill line, year 2010. Components in stock: ZV21 infeed unit model EV50; ZD31 profile chipper model VM50 with 2 x 200 kW; AV31 outfeed model VZM; VZ21 centring unit model VZV; DV21 log-turning unit model DV70-2; Microtec measuring system. Additional components available from September 2026: EVP infeed/centring unit, VM50 profile chipper 2 x 200 kW and VMP450 F61 profiling unit with 4 x 110 kW. Last overhaul 2024, last service 2025.

saw blade diameter: 300 mm turning speeds: 17,5/35 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-51538-2015

Control: Fanuc Profesional 3 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Control: Fanuc Profesional 5 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Clocked power supply, electronic module KNIEL CPM 100/VME ( CPM100/VME ) 330-049-04 input: 110 / 220 V AC 45 - 440 Hz output: 5 V DC 12 A 2 x 12 V DC 2.0 A used, tested ! Dimensions: 190 x 70 x 130 mm

Coolant Valve COAX 5-VMK 25 NC

Coolant Valve Block COAX Module 5-VMK 20 NC 98 20C1 3/4BD 24L 40 545 518129 116786-02 5-VMK 20 NC 54 20C1 3/4BD 24L Individual valves also available. Dimensions: 520 x 400 x 110 mm

Coolant valve COAX 5-VMK 15 DRNC I SO1 74 15C1 3/8RD 24z 100 502332 24 V DC New ! Dimensions: 220 x 220 x 90 mm

230watt, 250Watt, including 1x Dometic DSP212 12/230volt inverter Auction-ID: A1-50903-29

Used Eisele VMS 2 Metal Miter Saw Voltage: 380 volts With circulation cooling and clamping clamp Auction-ID: A1-50936-205

Compact and manoeuvrable VMAX E10N electric forklift truck with a nominal lifting capacity of 1,000 kg and a maximum lifting height of approximately 3 metres. Thanks to its compact dimensions and electric drive, this truck is particularly suitable for warehouses, workshops, production areas and logistics applications where manoeuvrability is essential. The machine is equipped with a duplex mast, solid tires, safety roof and a 24V traction battery. The mast, chains and guides are in good condition. The truck has a robust counterweight and offers stable and safe operation in daily internal transport tasks. The machine has approximately 11,953 operating hours. The forklift presents itself visually well-groomed with normal signs of wear according to age and professional use. Starts, drives, steers, lifts and lowers properly during test run. The charger is included. If necessary, it can be lo ...

Olympus VMC-10 – Video Management System Manufacturer: Olympus Model: VMC-10 Vendor designation: Olympus VMR-10 / VMC-10 – Video Control and Management System Included: Interface cables Condition: Very good, functionally tested Auction-ID: A1-51275-3

Cold circular saw - machine light - coolant system Saw blade diameter 300 mm Cutting diameter 90 mm Speed 40/80 rpm Total power requirement 1.5 kW Machine weight approx. 350 kg Dimensions approx. 0.9 x 0.8 x 1.5 m Condition: functional Auction-ID: A7-51438-453

With 4 and 5 axles, chip conveyor VICES and TOOLS NOT INCLUDED Auction-ID: A7-51375-37

Cold circular saw mitre 45 degrees on one side Saw blade diameter 300 mm Cutting diameter 100 mm Saw blade speeds 40 / 80 rpm Cutting range at 90 degrees: square 90 mm Cutting range at 90 degrees: around 100 mm Total power requirement 1.5 kW Machine weight approx. 0.4 t Condition: functional Auction-ID: A7-51438-608

Serial number H30163, complete with chip conveyor and manuals Auction-ID: A7-51375-36

Saw blade diameter 315 mm Cutting diameter 100 mm Cutting speed 40 / 80 rpm Total power requirement 1.2 kW Machine weight approx. 0.3 t Space requirement approx. 0.8 x 0.6 x 1.65 m Condition: functional Auction-ID: A7-51438-406

Never used / sold in original carton Auction-ID: A1-51538-46