volksmaschine vm used for sale

Dissolver VMA Getzmann Dispermat AE - 4C Power 2.2 kW Speed range 0-10000 1/min Toothed pulley 100 mm Accessories on request Complete with control cabinet Very good condition, straight from production

Bead mill VMA Getzmann Dispermat SL50-C Power 3 kW Speed range 0-6000 1/min Grinding chamber volume 0.5 l Bar temperature sensor Very good condition, straight from production

chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

General SKU215X086 MakeVMI Agitator LocationBarneveld CEcheck TypeDALLE HYD T 110 DE Main Features MaterialStainless steel Motor1.5 KW Length1375 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1375 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft142 — 1420 — 2471 rpm MaterialStainless steel 1.4301 (304) Information No.167386 Year of construction2012 Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

General SKU354T1008 Makefrymakoruma LocationBarneveld CEcheck TypeVME-12 Pressure Vacuum possiblecheck Working pressure jacket5 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4429 (316 LN), Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) Open stirring vesselcheck CapacityWork volume 12 litres (± 20 litres gross volume) Vessel sizesDia: 300x300 mm With covercheck Top connections1/2, 25 mm Outlet25 mm With jacketcheck With anchor stirrercheck With dissolver stirrercheck Motor0,5 kW, 220/380 Volt With homogenisercheck Motor0,12 kW, 380 Volt Information No.F.70.5908 Year of construction1982 Mounted on legscheck With switchcheck With switchgearcheck (as is) Floorspace1,15x0,7 m Total height1,8 m Weight350 kgProcessing vesselsFry ...

Milling machine Hurco VMX24 • Travel (X/Y/Z): 610 mm / 510 mm / 610 mm. • Table size: Approx. 760 x 510 mm. • Tool holder: SK40. • Tool changer: 24 places (side-mounted). • Spindle speed: Up to 12,000 rpm • Rapid traverse: Approx. 30-35 m/min (X/Y/Z). • Control: Hurco WinMax 6 1 shift operation May 2018 new spindle from 15,000 to 12,000 Replacement Monitor 30 cm Torisan TM121SV-02L01 LCD TFT available (subject to functionality) without tools and vices Perforated plate included

Dissolver VMA Getzmann Dispermat LC 30 Power 0.3 kW Speed range 0-20000 1/min Toothed pulley 50 mm Accessories on request Very good condition, straight from production

General SKUR0079 LocationBarneveld MakeFryma Maschinen AG (CH) TypeVME-12/C Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity20 ltr. (nett 12 ltr.) Vessel sizesdia.310x300mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsdia. 20mm (1x) dia. 12mm (1x) Outletdia. 20mm With jacketcheck Counter rotating stirrercheck Motor(2x) 3 kW 240/415 Volt / 0,75 kW 415 Volt Information No.M15101 Year of construction1992 With switchgearcheck Floorspace1,7x1,0 M Total height1,9 M Weight800 Kg Extra Specificationspart of the agitator is missing, : a shaft is mounted on which mixing accessories can be mounted. Barrel is tiltableProcessing vesselsFrymaProcessing vessels > ...

The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.

This 3-axis Hurco VMX 24 vertical machining centre was manufactured in 2000. It features X, Y, and Z travels of 610 mm each and a tool holder sk40. If you are looking to get high quality milling capabilities consider the Hurco VMX 24 machine we have for sale. Contact us for more information.

This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit.

This 5-axis Hurco VMX 24t was manufactured in 2008, featuring a Winmax Version 9 control system, a robust table size of 762 x 510 mm, and a high-speed spindle at 12000 rpm. It supports a maximum table load of 1350 kg and offers extensive X, Y, and Z travels of 610 mm each. Accessories include a coolant system with IKZ, spindle cooler, and a large chip conveyor. Contact us for more information about this machine.

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information.

This 3-axis Johnford VMC-2000SHD was manufactured in 2005. It features a large table size of 2200 × 1000 mm and extensive travels: X-axis at 2050 mm, Y-axis at 1100 mm, and Z-axis at 800 mm. With a spindle speed ranging from 10 to 6000 rpm and a tool magazine capacity of 40 tools, this vertical machining centre is ideal for complex machining tasks. Contact us for more information about this machine.

This 3-axis Hurco VMX40 vertical machining center was manufactured in 2001. Consider the opportunity to buy this Hurco VMX40 vertical machining center. Contact us for more information.

This Hurco VMX 30i was manufactured in 2016. It features a robust table size of 1020x510 mm with a maximum load capacity of 1000 kg. Equipped with a high-speed range up to 12000 rpm and a rapid traverse rate of 35/35/30 m/min in X/Y/Z, it ensures efficient machining. Additional features include a cooling water system, chip conveyor, and protective cabin. Consider the opportunity to buy this Hurco VMX 30i vertical machining centre. Contact us for more information.

This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.

This 3-axis Hurco VM5i vertical machining center was manufactured in 2016. It offers robust construction and precision engineering, ideal for a variety of machining tasks. Consider the opportunity to buy this Hurco VM5i vertical machining center. Contact us for more information about this machine.

This 3-axis SMTCL vmc 1100B was manufactured in 2015, featuring a robust 1100mm X-axis, 610mm Y-axis, and 650mm Z-axis. It boasts a spindle speed of 10,000 rpm and a 24-tool magazine. Equipped with a Fanuc 0i control and a table surface of 1300 x 610, consider the opportunity to buy this SMTCL vmc 1100B vertical machining centre. Contact us for more information.

This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This 3-axis MILLTRONICS VM24 vertical machining center was manufactured in 2001. It features a table size of 610 x 1140 mm, X/Y/Z travel of 1016/610/610 mm, and a spindle motor with 7.5/11 kW power. The machine supports a maximum workpiece weight of 900 kg and includes a 20-station tool changer. Ideal for detailed machining tasks. Contact us for more information about this machine.

General SKU422S1021 MakeFryma LocationBarneveld CEcheck TypeVME-400 / C Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor20 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316), Stainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity60 Ltr. - 400 Ltr. Vessel sizesdia. 1120x950 mm Dished bottomcheck With covercheck OutletDN25, DN40 With jacket49 Ltr. Max. temperature150 °C With anchor stirrercheck Motor3/4 kW 380 Volt (EX) Speed mixing shaft13/26 rpm. With homogenisercheck Motor20 kW: 968 rpm. Information No.F 93368 / M 15102 Year of construction1992 Floorspace2,9x1,5 m Total height4,3 m Weight3800 kg ATEX compatiblecheck Extra Specificationsvacuumpump Sihi LOH 25007Processing vesselsFryma Korum ...

This 3-axis Hartford Omikron VMC-1020 A was manufactured in 1998. Its a vertical machining center that recently had its X-axis bearings replaced. If you are looking to get high-quality milling capabilities, consider the Hartford Omikron VMC-1020 A machine we have for sale.Contact us for more information.

General SKU215X090 MakeVMI Rayneri TypeDYNAVAR SB 25 No.129542 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length1300 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1300 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft350 — 1750 rpm MaterialStainless steel 1.4306 (304L) Information Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU397X1153 MakeEaton LocationBarneveld CEcheck TypeVMDE-0402-AC10-100DX-22SEN-M Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume85 Ltr. Surface0.16 m2 Specified Features - Candle filter Candle filtercheck Filter surface± 0,4 m² (1,6 m ²) Number of candles4 Candle sizesø 200 x 659 Cake capacity185 l. Liquid outletDN100 Max. temperature— 10 / 160 °C Top connectionsDN100 Vessel sizesø 550 x 800 mm MaterialStainless steel 1.4571 (316Ti) Candle filters Capacity185 l. Max. temperature-10°C/+160°C Number of bags4 Information No.V1586.3 Year of construction2017 Mounted on legscheck Weight220 kgCandle filtersEatonFilters > Candle filtersBrand > Eaton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machines transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details.

General SKU252W328 MakeFryma Koruma LocationBarneveld CEcheck TypeVME-120/C Pressure Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor15 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity226 Ltr. (netto 120 Ltr.) Vessel sizesDia. 900x650 mm Dished bottomcheck Hollow bottomcheck Flat top sidecheck With covercheck Top connectionscheck Outlet2x 40 mm, 1x 80 mm With jacketcheck Volume 28 ltr. Max. temperature140°C With anchor stirrercheck Motor3,0 kW, 400 volt, 1410 rpm Speed mixing shaft27 rpm With homogenisercheck Motor15 kW, 1460 rpm Information No.100497 Year of construction2002 Mounted on legscheck With switchgearcheck (as is) Floorspace3,45x1,50 m Total height2,10 m Weight2000 kg Extra Specifications- With hydraulic unit.  ...

This 3-axis Hurco VMX 30i was manufactured in 2014. It features a 760x510x610 mm working envelope, a 1020x510 mm table, and a high-speed spindle at 12000 rpm with SK40 taper. The machine includes a 40-piece tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information about this machine.

General SKU120X674 MakeVMA-Getzmann TypeDispermat 5 No.601-9814689 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck Information LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGSand millsVMA-GetzmannMills > Sand millsBrand > VMA-Getzmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...

This 3-axis KAMIOKA VMC1600 was manufactured in 2012, featuring a Mitsubishi M70A CNC control. It offers extensive axis travels with X-axis at 1600 mm, Y-axis at 800 mm, and Z-axis at 700 mm. The design includes inverted guides for enhanced precision. If you are looking to get high-quality milling capabilities consider the KAMIOKA VMC1600 machine we have for sale. Contact us for more information.

General SKU285S352 MakeL.B. Bohle Maschinen und Verfahren GmbH (D) TypeVacumat VMA 300 EX vacuum mixer Mach.No.9201497/1 Year of construction1992 Main Features MaterialStainless steel Volume240 Ltr. Motor15.9 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity90-240 ltr. Vessel sizesDia: 840x550mm With covercheck Pneumatic operated outletcheck OutletDia: 200mm With jacketcheck With motor15,9 kW 380 volt Rotor speed5-220 rpm With lump breakercheck With motor2,2 / 6,5 kW 380 volt Rotor speed1500 rpm Information LocationBarneveld With switchgear(as is) Floorspace2,4x2,1 M Total height2,9 M Weight3400 Kg Extra Specificationsincluding Leybold Sogevac SV200 B 960502 vacuum pump Universal mixersBohleMixers > Universal mixersBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine.

General SKU292M361 MakeVMI Rayneri TypePIL.direct 15/750 VF No.75953 Year of construction1996 Mounted on framecheck Main Features MaterialStainless steel Motor0.75 KW Length700 mm Specified Features - Stirrer Propellor stirrercheck Shaft length± 700mm Sizes stirring headø 110mm Motor0,75 KW, 230/400 Volt With frequency controllercheck Speed mixing shaft100-808 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information LocationBarneveld Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x0,8 M Total height1,7 M Weight150 KGStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...

This 3-axis Hurco VMX84i was manufactured in 2015. It features a WinMax control system, a table size of 2185 × 865 mm, and a maximum table load of 2270 kg. The machine offers a travel range of 2135/865/762 mm and a spindle speed up to 12000 RPM. It includes a 40-position automatic tool changer and through-spindle coolant. If you are looking to get high-quality milling capabilities, consider the Hurco VMX84i machine we have for sale. Contact us for more information.

This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, its ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine.

General SKUR1396 MakeL.B. Bohle Maschinen & Verfahren GmbH (D) TypeVMA20 V M Ex system Single Pot High Shear Granulator Mach.No.0108701001 A Nr 79398 Year of construction2002 Main Features MaterialStainless steel Volume20 Ltr. Motor17 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Gral-granulatorcheck Capacity20 ltr ( Batch size 7 Ltr.) Vessel sizesdia. ca 300x250mm Outletdia 60mm With jacketcheck With motorcheck Rotor speed10-470 rpm With lump breakercheck With motorcheck Rotor speed1420-1870 rpm Information LocationBarneveld With switchgearcheck Floorspace1,9x1,4 M Total height2,0 M Weight1000 Kg Extra SpecificationsThe one-pot granulator VMA is a granulation system specially optimized for pharmaceutical applications. The three process steps mixing, high-shear wet granulation and drying are implemented in a closed proc ...

This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information.

This 3-axis Hurco VMX 24t was manufactured in 2007. It features a SK40 tool holder and a spacious 610 x 508 x 610 mm travel in the x, y, and z axes, complemented by a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 24t machine we have for sale. Contact us for more information.

Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar

This 3-axis Fadal VMC4525 was manufactured in 2000. A robust vertical machining center featuring a Fadal CNC 88HS control, it offers X/Y/Z travels of 1,143/635/610 mm and a table size of 1,359 × 635 mm. It supports a maximum workpiece weight of 1,928 kg and includes a 24-tool capacity magazine. Ideal for complex milling tasks. Contact us for more information about this machine.

This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine.

BAZ Hurco VMX 40 built in 2001

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible.

Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible.