volksmaschine vm used for sale

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Inv. Num. : 8788 Type: TKS070. ECZVO Producer: HV VMD GRYGOV Created: 2016 Parameters: Power consumption: 73 kW Maximum temperature: 450 C Weight: 2100 kg

VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, 60 mm screen (or bespoke), control panel, good working conditions, Constructed in 11-2001, Users manual, electrical drawings, CE compliance., offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: May 2026, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric

x-travel: 1.060 mm y-travel: 610 mm z-travel: 610 mm control: Winmax 9 (Upgrade) table-size: 1.270 x 610 mm max. table load: 1.100 kg number of T-slots: 5 T-slot - width: 18 mm T-slot - distance: 100 mm turning speed range - milling: ~ 10.000 U/min power capacity - milling spindle: 18 / 11 kW tool taper: SK 40 Tool changer: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 120 mm max. tool length: 300 mm max. tool weight: 7 kg feed: ~ 15,4 m/min rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 30 m/min rapid traverse Z-axis: 20 m/min weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,5 x 3,2 x 3 m Chip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - Vertical HURCO VMX 42 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU120X675 MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsVMA-GetzmannIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries  ...

General SKU213T1392 MakeRubitec AG LocationBarneveld TypeVMT 200 Main Features MaterialStainless steel Motor4 KW Width190 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 190x100 mm Sieve sizesDia:260x130 mm Sieve perforationDia: 5 mm OutletDia: 300 mm Motor4kW,220-240/380-415Volt, 2905rpm(EX) Speed100-1000 U/min MaterialStainless steel 1.4435 (316L) General No.071080 Year of construction2007 Mounted on stainl. st. framecheck Mounted on wheelscheck Floor space1,0x0,60 m Total height0,88 m Weight230kg ATEX designedcheck Extra SpecificationsAtex II3GSieve granulatorsPowdered foodsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicRubitecSieves > Sieve granulatorsIndustries >  ...

General SKU454W1507 MakeVMA-Getzmann LocationBarneveld CEcheck TypeDispermat SL-C25 Main Features MaterialStainless steel Volume0.25 Ltr. Motor3.7 KW Specified Features - Sand mill Horizontal sand millcheck Capacity0,25 l. Housing dimensions Dia. 100x100 mm Motor3,7 kW, 400 volt, With variable speed drivecheck Rotor speed0-6000 rpm Capacity0,3-2,5 l With pumpcheck Motor0,37 kW, 266/460 volt, 60 Hz, 1680/330 rpm MaterialCarborundum (Silicon carbide) General No.09608597 Year of construction1997 With switchgearcheck Floorspace0,70x0,70 m Total height0,37 m Weight50kgStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsVMA-GetzmannIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries ...

General SKU345X792 MakeFryma LocationBarneveld TypeVME-400 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume480 Ltr. Motor6.8 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity480 l Vessel sizesDia. 1000 x 900 mm Dished bottomcheck Flat top sidecheck With covercheck ManholeDia. 900 mm Top connectionscheck OutletDN25 + DN80 With jacketcheck Max. temperature150°C With anchor stirrercheck Motor6,8 kW (380 V, 1485 rpm, (Ex)) With homogenisercheck Motor5,5 kW (380 V, 2910 rpm (Ex)) MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) With jacketcheck General No.M11362 Year of construction1985 Mounted on legsin frame With switchcheck Floorspace1,35 x 2,00 m Total height2,30 m Weight1900 kg ATEX designedcheck Extra SpecificationsWith  ...

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU215X084 LocationBarneveld CEcheck MakeVMI Main Features MaterialStainless steel Motor3 KW Length1290 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length1290 mm Sizes stirring headDia. 170 mm Number of stirrers on shaft1 Motor3,0 kW, 230/400 volt, 1436 rpm, (Ex) With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel 1.4404 (316L) General TypeT110 SE Mach.No.162928 Year of construction2011 Mounted on wheelscheck With switchcheck Floor space1,25x1,40 m Total height2,30 m Weight450 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarL ...

x-travel: 610 mm y-travel: 510 mm z-travel: 610 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip tank - electronical hand wheel Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU215X087 MakeVMI LocationBarneveld CEcheck TypeChariot Dalle T110 DE Main Features MaterialStainless steel Motor3 KW Length1375 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length1375 mm Sizes stirring headø 175 mm Number of stirrers on shaft1 Motor3 kW, 230/400 volt, 1436 rpm, (Ex) With variable speed drivecheck Speed mixing shaft1500 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel 1.4307 (304L) General No.161551 Year of construction2011 Mounted on wheelscheck With switchcheck Floorspace1,25x1,40 m Total height2,30 m Weight450 kg ATEX designedcheckPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceutics ...

chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU215X086 MakeVMI Agitator LocationBarneveld CEcheck TypeDALLE HYD T 110 DE Main Features MaterialStainless steel Motor1.5 KW Length1375 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1375 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft142 — 1420 — 2471 rpm MaterialStainless steel 1.4301 (304) General No.167386 Year of construction2012 Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverages ...

Milling machine Hurco VMX24 • Travel (X/Y/Z): 610 mm / 510 mm / 610 mm. • Table size: Approx. 760 x 510 mm. • Tool holder: SK40. • Tool changer: 24 places (side-mounted). • Spindle speed: Up to 12,000 rpm • Rapid traverse: Approx. 30-35 m/min (X/Y/Z). • Control: Hurco WinMax 6 1 shift operation May 2018 new spindle from 15,000 to 12,000 Replacement Monitor 30 cm Torisan TM121SV-02L01 LCD TFT available (subject to functionality) without tools and vices Perforated plate included

General SKUR0079 MakeFryma Maschinen AG (CH) LocationBarneveld TypeVME-12/C Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity20 ltr. (nett 12 ltr.) Vessel sizesdia.310x300mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsdia. 20mm (1x) dia. 12mm (1x) Outletdia. 20mm With jacketcheck Counter rotating stirrercheck Motor(2x) 3 kW 240/415 Volt / 0,75 kW 415 Volt MaterialStainless steel 1.4435 (316L) With jacketcheck General No.M15101 Year of construction1992 With switchgearcheck Floorspace1,7x1,0 M Total height1,9 M Weight800 Kg Extra Specificationspart of the agitator is missing,&:nbsp: a shaft is mounted on which mixing accessories can be mounted. Barrel is tiltableGeneric medicinesOintment ...

The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.

This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit.

This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information.

This 3-axis Hurco VMX40 vertical machining center was manufactured in 2001. Consider the opportunity to buy this Hurco VMX40 vertical machining center. Contact us for more information.

This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.

This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This 3-axis SMTCL vmc 1100B was manufactured in 2015, featuring a robust 1100mm X-axis, 610mm Y-axis, and 650mm Z-axis. It boasts a spindle speed of 10,000 rpm and a 24-tool magazine. Equipped with a Fanuc 0i control and a table surface of 1300 x 610, consider the opportunity to buy this SMTCL vmc 1100B vertical machining centre. Contact us for more information.

General SKU422S1021 MakeFryma TypeVME-400 / C No.F 93368 / M 15102 Year of construction1992 LocationBarneveld Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor20 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity400 l Vessel sizesdia. 1120 x 950 mm Dished bottomcheck With covercheck OutletDN25, DN40 With jacketcheck Max. temperature150°C With anchor stirrercheck Motor3/4 kW 380 Volt (EX) Speed mixing shaft13/26 rpm. With homogenisercheck Motor20 kW: 968 rpm. MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316), Stainless steel 1.4435 (316L) With jacketcheck General Floorspace2,9x1,5 m Total height4,3 m Weight3800 kg CEcheck Extra information Extra Specificationsvacuumpump Sihi LOH 25007 Generic medicinesOintmentsBiote ...

This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machines transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details.

This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine.

General SKU252W328 MakeFryma Koruma LocationBarneveld CEcheck TypeVME-120/C Pressure Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor15 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity226 Ltr. (netto 120 Ltr.) Vessel sizesDia. 900x650 mm Dished bottomcheck Hollow bottomcheck Flat top sidecheck With covercheck Top connectionscheck Outlet2x 40 mm, 1x 80 mm With jacketVolume 28 ltr. Max. temperature140°C With anchor stirrercheck Motor3,0 kW, 400 volt, 1410 rpm Speed mixing shaft27 rpm With homogenisercheck Motor15 kW, 1460 rpm MaterialStainless steel 1.4435 (316L) With jacketcheck General No.100497 Year of construction2002 Mounted on legscheck With switchgear(as is) Floorspace3,45x1,50 m Total height2,10 m Weight2000 kg Extra Specifications- With hydraulic unit ...

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible.

General SKU120X674 MakeVMA-Getzmann TypeDispermat 5 No.601-9814689 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsVMA-GetzmannIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries  ...

General SKU215X090 MakeVMI Rayneri LocationBarneveld TypeDYNAVAR SB 25 Main Features MaterialStainless steel Motor1.5 KW Length1300 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1300 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft350 — 1750 rpm MaterialStainless steel 1.4306 (304L) General No.129542 Year of construction2002 Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharm ...

General SKU285S352 LocationBarneveld MakeL.B. Bohle Maschinen und Verfahren GmbH (D) TypeVacumat VMA 300 EX vacuum mixer Main Features MaterialStainless steel Volume240 Ltr. Motor15.9 KW Specified Features - Universal mixer Universal mixercheck Capacity90-240 ltr. Vessel sizesDia: 840x550mm With covercheck Pneumatic operated outletcheck OutletDia: 200mm With jacketcheck With motor15,9 kW 380 volt Rotor speed5-220 rpm With lump breakercheck With motor2,2 / 6,5 kW 380 volt Rotor speed1500 rpm MaterialStainless steel With jacketcheck General Mach.No.9201497/1 Year of construction1992 With switchgear(as is) Floorspace2,4x2,1 M Total height2,9 M Weight3400 Kg Extra Specificationsincluding Leybold Sogevac SV200 B 960502 vacuum pumpPowdered foodsGeneric medicinesCatalysts & fillersUniversal mixersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfection ...

This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine.

Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar

This 3-axis Hurco VMX 24 was manufactured in 2004, featuring a robust CNC control system, HURCO Ultimax. It offers a table size of 760 × 510 mm with a load capacity up to 850 kg. The spindle can reach speeds up to 15,000 rpm, and the machine includes a 24-position automatic tool changer. Ideal for detailed milling operations. Contact us for more information about this machine.

BAZ Hurco VMX 40 built in 2001

This 3-axis Eikon VMC 1000 was manufactured in 2000. It features a 10,000 RPM spindle, a 20-tool changer, and X/Y/Z travels of 1000mm, 500mm, and 400mm respectively. Equipped with a Selca 3045 control system, consider the opportunity to buy this Eikon VMC 1000 vertical machining centre. Contact us for more information.

Used homogenizer from Fryma type VME 10. Capacity 10 liters. The mixer has a heating/cooling jacket.

General SKU292M361 LocationBarneveld MakeVMI Rayneri TypePIL.direct 15/750 VF No.75953 Main Features MaterialStainless steel Motor0.75 KW Length700 mm Specified Features - Stirrer Propellor stirrercheck Shaft length± 700mm Sizes stirring headø 110mm Motor0,75 KW, 230/400 Volt With frequency controllercheck Speed mixing shaft100-808 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel General Year of construction1996 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,1 x0,8 M Total height1,7 M Weight150 KGPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additiv ...

High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg

Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 -Pressure switch: Parker Senso Control SCPSD-016-14-15 -Control valves: coax 5-VMK 32 NC / 1 824 210 291 -Individual components: see photos -Submission/Price: complete -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg

Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Automata, Control Rack -Type: Rack VME 9 SLDT 7U/R -Printed circuit boards: Tecnint TVM 743 Tecnint TVM 200 CA1-94-V1 -DC/DC Converter: cdi -PowerSupply: Automata VME 150W -Individual components: see photos -Price/Sale: complete -Dimensions: 300/280/H310 mm -Weight: 9.9 kg

Koppens Former Model: VM400HSE 400mm belt width Screw Fed system New Mitsubishi touch screen Excellent overall condition With one mould set included

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 vertical machining centre we have for sale. Contact us for further details.

Table 840 x 420 mm Travel X/Y/Z 600 / 410 / 520 mm, Spindle SK 40, speed up to 60001 rpm, Main drive 8.5kW, Tool changer 22 places Control Heidenhain TNC 370 incl. coolant device

A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

Manufacturer: Hurco Model: VMX1 Year of manufacture: 2004 Type of Machine: CNC milling machine Control unit: Hurco Ultimax Spindle taper: SK 40 Spindle speed: max. 10,000 rpm Milling feed: max. 11,400 mm/min Table size: approx. 760 × 355 mm Travel distances: X 660 mm / Y 355 mm / Z 455 mm Tool changer: 16 positions Motor power: max. 13 kW Weight: approx. 3,400 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - chip conveyor - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - .ucymachines/ Contact us at - sales@ucymachines