51 offers voest

Category: 102: lathes
approved
dealer
New in: 1991
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Cycle-controlled lathe Voest-Alpine W 570E/1, BJ 1991, turning diameter 570 mm, Turning length 1000 mm, spindle bore 62 mm, with coolant device, with quick-release steel holder. The Dreibachen fodder has 250 mm, with interior and outer packing. The multiple steel holder is from Böni Suisse, type 125. For meisel height up to 32 mm or drill rod 32 mm.

Category: 109: other metal working machines
approved
dealer
New in: 1992
Price: request quote
Location: 89312 GÃ?NZBURG
Seller: Ralf Schmeißer Werkzeugmaschinen

turning diameter over bed: 380 mm turning diameter over slide rest: 185 mm turning length: 800 mm centre height: 180 mm bed width: 330 mm spindle nose: 55027 Gr. 6 turning speed range - spindle: 33-1500 U/min tailstock quill taper MT: 4 spindle bore: 52 mm engine output: 5,5 kW total wight: 0.97 t The machine can be viewed under current.: 00759101 380 V, 50 Hz, color: blue / light gray Machinery Directive: Engine brake Spänerückwand Chip tray Chip protection in emergency Integrated from chain Guide and stem cover 2 x emergency stop switch Control cabinet touch-proof Equipment: 3 axle Fagor Digital VN 301 RS 3 jaw chuck Röhm 200 mm Multifix B holder + 2 inserts, fixed and revo ...

Category: 102: lathes
approved
dealer
New in: 1984
Price: request quote
Location: Land-de DE 73466 Lauchheim, Am Mühlweg 1
Seller: Aleman Machines e.K.

-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm

Category: 101: boring mills and machining centers
New in: used
Price: 4.500 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 30/32 mm : 1,5 kW : 180 mm : 60 - 655 mm : 1.135 x 840 mm : 185 mm : 1.200 mm : 800 mm : 2.100 mm : 940 kg rapid radial drilling machine machine base with t-slots coolant equipment left/right run no user manual included does not comply with the current industrial safety regulations (AMVO &, UVV) drilling capacity in steel: 30/32 mm MT: 3 revs: 20 - 3.000 rpm (8) 3 aut. feeds: 0,05 - 0,2 mm/U spindle motor: 1,5 kW spindle travel: 180 mm throat depth: min./max. 255 - 1.000 mm max. distance spindle-table: 60 - 655 mm table: 1.135 x 840 mm column diameter: 185 mm length: 1.200 mm width: 800 mm height: 2.100 mm weight: 940 kg The data for this ad was created with ModulMWS - the software  ...

Category: 102: lathes
New in: used
Price: 4.950 €
Location: Land-de DE 23626 Ratekau, Zeiss-Str. 24
Seller: Fa. Schönknecht

Vöest Alpine Lathe lathe Type DA 160 from a training workshop Technical data: Vöest Alpine DA 160 Tip width 650 mm Tip height 165 mm Turning diameter over bed 330 mm Main spindle bore 36 mm Speed range 50 - 2000 / min Tailstock MK 3 incl. Lokoma accessory cabinet Accessories, such as quick-release steel holder, flat disc, centering tips, bed stop, interchangeable gears etc. Operating documents It is 1 lathe, there are a total of 4 available. You will be created an invoice with VAT shown .

Category: 102: lathes
New in: 1980
Price: request quote
Location: Standort
Seller: Wirths GmbH, Werkzeugmaschinen

turning diameter over bed: 0900 mm turning diameter over slide rest: 700 mm turning length: 6000 mm centre height: 465 mm centre distance: 6100 mm spindle bore: 90 mm speeds: 5,6 - 1120 U/min feeds longitudinal slide: 0,06 - 1,4 mm/U feeds cross slide: 0,024 - 0,518 mm/U weight of the machine ca.: 15 t dimensions of the machine ca.: 9 x 2,5 x 2,2 m voltage: 380 V main drive: 24 kW We supply one faceplate, one fixed steady rest and one Multifix tool holder with one holder along with the machine. There is one set of change gears mounted on the reverse gear box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102: lathes
approved
dealer
New in: 1991
Price: request quote
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

Function has not been checked. Technical data: Brand: Voest Alpine Type: W 570 E Y.O.M.: 1991 Circulating diameter: over bed 570 mm Gr. Turning- a: in the cavity 600 mm Gr. Turning length: 1000 mm Spindle bore: 63 mm Rest: See original data sheet.

Category: 102: lathes
approved
dealer
New in: 1991
Price: request quote
Location: Germany
Seller: ProdEq Trading GmbH

turning diameter: 500 mm turning length: 1600 mm control: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 1 - number of turrets: 2 - number of c-axes: 1 - number of y-axes: 1 WORKING RANGE TURNING: - swing diameter (max): 700 mm - turning diameter (max): 500 mm - worpiece length max.: 1600 mm ELECTRICAL SPECIFICATIONS: - total power consumption: 54 kW DIMENSIONS / WEIGHTS: - space requirements -left/right-: 5300 mm - space requirements -front/back-: 4000 mm - total height: 2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102: lathes
approved
dealer
New in: 1969
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Center height: 210mm, swing over bed/ cross slide: 435/ 260mm, center distance: 1000mm, bed width: 330mm, rotational speed: 21-1500/min, weight: 1.16t.

Category: 102: lathes
approved
dealer
New in: used
Price: request quote
Location: Land-CH Switzerland, 2555 Bruegg BE
Seller: Muller Machines SA

Category: 102: lathes
approved
dealer
New in: 1995
Price: 14.000 €
Location: Land-pl PL 58-56 Jelenia Góra, MASZYNERIA SP. Z O.O. 18/13
Seller: MASZYNERIA SP. Z O.O.

The lathe CNC VOEST ALPINE WNC 500 S x 1000 was produced in 1995 in Austria. Technical data : - CNC control: SINUMERIK 810 T GA2 - turning length: 1000 mm - turning diameter: 540 mm - number of tools: 12 - spindle diameter: 77 mm - tool cone: VDI 40 - rolling speed range: 25 - 4000 rpm - weight: approx. 10000 kg - dimensions (length x width x height): 5800 x 3050 x 3000 mm

Category: 102: lathes
approved
dealer
New in: 1990
Price: request quote
Location: Austria / TIROL
Seller: ProdEq Trading GmbH

turning diameter: 340 mm turning length: 1000 mm control: --------------------------------------------------: WORKING RANGE TURNING: - swing diameter (max): 570 mm - turning diameter (max): 340 mm - worpiece length max.: 1000 mm - workpiece weight max.: 1000 kg MAIN SPINDLE: - spindle revolutions (min): 85 /min - spindle revolutions (max): 2500 /min X/Z SLIDE: - tool fixture: Steel Holder: TAILSTOCK: - sleeve stroke: 160 mm - sleeve diameter: 70 mm - taper: MK 5: DIMENSIONS / WEIGHTS: - space requirements -left/right-: 2700 mm - space requirements -front/back-: 1700 mm - total height: 1800 mm - total weight approx.: 2800 kg The data for this ad was created wi ...

Category: 102: lathes
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 87719 Mindelheim, Biberkopfstr. 4
Seller: Weber Werkzeugmaschinen GbR

Tip height: approx. 165 mm Top width: 650 mm Speeds: (16) 30-2500 RPM Bed width: approx. 210 mm Live recording: MK 2 Facilities: -Change gears Emergency stop in the working area -JAWS Chuck guard -Lamp

Category: 101: boring mills and machining centers
New in: 1984
Price: 14.700 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 8 mm : 500 - 3.150 mm : 6 mm : 8 mm : 1.000 mm : 1.000 mm : 300 mm : 22 kW : 3.725 mm : 2.765 mm : 1.840 mm : 10.000 kg swing beam guillotine shear mot. back gauge cutting length continuously variable 1 side lay 4 sheet support arms manual cutting gap adjustment cutting line illumination 14. pcs. hyd. hold down clamps stroke-pce. counter stroke counter operating hours counter foot pedal blades turned no users manual Does not comply with the present industrial safety regulation (AMVO &, UVV) cutting capacity: 8 mm cutting length continuously variable: 500 - 3.150 mm cutting capacity ST60: 6 mm cutting capacity ST37: 8 mm back gauge mot.: 1.000 mm side lay: 1.000 mm throat depth: 300 mm c ...

Category: 102: lathes
approved
dealer
New in: 1992
Price: request quote
Location: Land-de DE Deutschland
Seller: METEC GmbH

Lathe cycle controlled Manufacturer: Voest Alpine Type: E50 Year of construction: 1992 Control: Voest Alpine Top width: 2,000 mm Tip height: 280 mm Accessories: Three jaw Chuck 315 mm Face plate 500 mm Bezel various JAWS

Category: 102: lathes
approved
dealer
New in: 1991
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter: max. 570 mm turning length: 1000 mm swing diameter over face slide: 340 mm greates pass round over bed: 570 mm turning speed range - main spindle: 1 - 2500 min/-1 power capacity - main spindel: 11 kW spindle bore: 63 mm diameter of quill: 70 mm taper of center: MK 5 quill stroke: 160 mm Dimensions (LxWxH): 3,0 x 1,8 x 1,8 total power requirement: 15 kVA weight of the machine ca.: 3,0 t Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101: boring mills and machining centers
approved
dealer
New in: 1962
Price: request quote
Location: Land-at AT 4661 Roitham, Kemating 16
Seller: ZIEGLER Maschinen & Werkzeuge

-Drilling capacity: grey cast iron 40 mm / carbon steel 32 mm -Quill stroke: 180 mm -Spindle retainer: MK4 -Speed: 20-3000 rpm -Transmission levels: 8 -maximum distance spindle/table: 890 mm (630 mm without extension) -Projection: 1000 mm -Drilling table size: 700 x 700 mm -Column diameter: 130 mm -Engine capacity: 1,6 kW -Dimensions WxHxD: CA. 800 x 2500 x 1900 mm -Weight: 940 kg

Category: 102: lathes
approved
dealer
New in: 1991
Price: request quote
Location: Standort
Seller: IMZ Maschinen Vertriebs GmbH

turning diameter: 750 mm turning length: 2000 mm control: SIEMENS SINUMERIK 850 turning diameter over slide: 670 mm turning diameter over bed: 750 mm main spindle bore: 160 mm chuck diameter: 620 mm steady: 50-200 mm total power requirement: 75 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 8x5x4,5 m Disc turret: 9 tools 8 boring bars in the magazine (max. D 80x835 mm) 24 Drilling and milling tools in the drum turret (SK 40) Operating hours: approx. 80,000 operating hours Driven tools: 24 incl Accessories: Various spare parts (for example cover plates), turning tools,forage, baking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102: lathes
approved
dealer
New in: 1977
Price: request quote
Location: Land-at AT 4661 Roitham, Kemating 16
Seller: ZIEGLER Maschinen & Werkzeuge

-4 - jaw Chuck -Multi fix B -removable bed -Engine brake -fully operational -BJ. 1977 -Centre distance: 1500 mm -Tip height: 260 mm -Turning diameter over bed: 520 mm -Swing over carriage: 380 mm -Quill recording: MK4 -Spindle bore diameter: 48 mm -Bed width: 330 mm -Speeds: 18 -Speed range: 21-1500 rpm -Feed range longitudinal slide: 0.068-3,805 mm -Metric threads: 0.5-28 mm -Inch thread: 1-56 tpi -Motor: 5 kW -Voltage: 400 V -Dimensions WxHxD: approx. 2700 x 1320 x 1100 mm -Weight: approx. 1500 kg

Category: 102: lathes
approved
dealer
New in: 1994
Price: request quote
Location: Bremen
Seller: Klaus Rosenboom GmbH

turning diameter: 810 mm turning length: 3000 mm turning diameter over slide: 510 mm turning dia. in gap: 880 mm control: Siemens 850 T turning speeds: 1800 U/min drive motor: 27 kW spindle bore: 105 mm range L-W-H: 6,5 x 2,4 x 1,95 mm weight of the machine ca.: 6,5 t Used Teach in Lathe with stabil construction - 3- ja chuck Forkardt Ø 400 mm - Multifixhalter size C - machine light - chip conveyor - some jaws - some tool holder Multifix - Block for bore bars - machine feets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102: lathes
approved
dealer
New in: 1982
Price: request quote
Location: Land-de DE 50374 Erftstadt
Seller: KW Maschinen GmbH

Top width 800 mm Tip height a.s.l. bed 180 mm Circulation Ã? above bed 380 mm Circulation Ã? above slide 200 mm Spindle hole 52 mm Speed range 33-1.500 U/min Accessories: 3 bake Forkardt chucks Ã? 200 mm Digital display of the axes Coolant system Spindle safety cover Tailstock Multifix tool holder dimensions: (Lxwxh) 0.95 m x 2.00 m x 1.38 m Weight approx. 1,2 t The Fixators are not part of the sale.

Category: 102: lathes
approved
dealer
New in: 1990
Price: request quote
Location: Willich
Seller: Markus Hirsch GmbH

turning diameter: 570 mm turning length: 2000 mm control: centre height: 280 mm turning diameter over slide rest: 340 mm bed width: 350 mm spindle diameter: 100 mm spindle hollow: 63 mm transmission ratio: 2 spindle turning speed range: 1-2500 U/min quill stroke: 160 mm total power requirement: 15 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 2,75x1,65x1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107: sheet metal working
approved
dealer
New in: 1986
Price: request quote
Location: 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -maximum working width 3150 mm - max cutting capacity St 40 13 mm -RADIUS 300 mm -Strokes at full cutting length 18 per/min -MOT. Backgauge with position indicator 10 â 1000 mm -Hair length setting 500-3150 mm -Angle - manual adjustment of the cutting gap -14 PCs hydraulic hold-down device -front angle hinges left + right -3 PCs front support arms -Drive 400 V / 28 kW -Footswitch - space without support arms about B 4250 x H 2100 X 2450 mm -Weight approx. 16600 kg

Category: 102: lathes
approved
dealer
New in: 1987
Price: request quote
Location: Willich
Seller: Markus Hirsch GmbH

turning diameter: 570 mm turning length: 2000 mm control: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mm turning diameter over slide: 340 mm spindle bore: 63 mm Tool changer: total power requirement: 22 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5x1,5x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102: lathes
approved
dealer
New in: 1990
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Tip height 180 mm -Top width 1000 mm -largest circulation - Ã? bed / cross slide about 350 / 200 mm -Traverse path of cross slide around 200 mm -Spindle carrier according to DIN 55022 -Spindle bore 52 mm -Taper of tailstock Quill MK 3 -The tailstock Quill travel 120 mm -12 spindle speeds 44-2000 RPM -Adjustable spindle brake -Feeds - along 0,072 - 0.54 mm / Rev -plan 0.036 - 0.27 mm / Rev -Feed + speed -metric thread pitches 0.4-5.6 mm -Inch thread 46-4 TPI -Module thread 0,25-1,75 module -Diametral Pitsch thread 92-14 DP -Drive 400 V / 5,5 kW -with:-digital display HEIDENHAIN -Chip tray, 3 - jaw Chuck, - SWS steel holder with inserts, li ...

Category: 102: lathes
approved
dealer
New in: 1992
Price: request quote
Location: Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

turning diameter: 540 mm turning length: 1000 mm control: SIN880T power capacity: 37,00 kW turning speeds: 8 - 3148 U/min swing diameter over slide rest: 450 mm greates pass round over bed: 540 mm tool taper: SK 40 DIN 69871-A40 tool magazin:: 24-fach spindle diameter in front bearing: 160 mm spindle bore: 115 mm z-axis: 1411 mm x-axis: 380 mm e-axis: 560 mm max. torque on the spindle: max. 1520 feed range: 0 - 10.000 mm/min rapid traverse: 15 m/min power feed longitudinal: 16.500 N power feed plane: 11.000 N drive milling spindle: 15,00 kW turning speed range - milling: 0 - 3000 U/min b-axis: 180 x 0,01 ° y-axis: 300 mm quill stroke: 160 mm diameter of quill: 140 mm quill power: 3000 - 120 ...

Category: 101: boring mills and machining centers
approved
dealer
New in: used
Price: request quote
Location: Wiesbaden
Seller: Kurt Steiger Werkzeugmaschinen GmbH

Drilling capacity in steel (diameter): 25 mm throat depth: 1000 mm spindle mount MT: 3 table size: 800 x 1120 mm speed: 20-3000 rpm feed: 0.05; 0.1 and 0.2 mm weight: approx. 700 kg space requirement: 1800 x 850 x 2200 mm

Category: 102: lathes
approved
dealer
New in: 1996
Price: request quote
Location: Malsch
Seller: Emuk Werkzeugmaschinen GmbH

turning diameter: 450 mm turning length: 1200 mm control: Siemens 840 C swing over bed: 540 mm swing diameter over slide rest: 450 mm spindle bore: 77 mm spindle turning speed range: 10 - 3150 U/min c-axis: 0,001 °/deg. y-axis: 160 (+/- 80) mm b-axis: 180 (+/- 90) °/deg. x-travel: 380 mm z-travel: 2031 mm milling head speed: 1-3000 U/min hobbing length: 2031 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: 6248 x 3302x 2700 mm Werkzeugwechsler mit 24 Werkzeugen Spindelinnenkühlung NC-Reitstock,Pinolen-Drm. 100 mm NC-Lünette, SMW , SLU-4-ZS , Spannbereich 35-245 mm Y-Achse B-Achse Späneförderer Hochdruck-Kühlung mit Filterung Kraftspannfutter, Durchmesser 31 ...

Category: 107: sheet metal working
approved
dealer
New in: 2001
Price: request quote
Location: Land-de Germany, 72622 Nürtingen
Seller: METEC GmbH

Plasma cutting machine CNC-Portal Manufacturer: ESAB Type: Suprarex SXE-P 5500 Year of construction: 2001 L/B (table) work area: 3000 x 12,000 mm 3 oxy-fuel burner with single ignition 6 burner with Strip burner possible extension Cutting capacity: 3-300 mm Rotating 3-burner unit for welding edge preparation 1 plasma burner with Hypertherm MAX 200 Marking device with arc (ARC marker) Extraction: Cyclone FA. Voest

Category: 102: lathes
approved
dealer
New in: 1984
Price: request quote
Location: Sueddeutschland
Seller: Aleman Machines e.K.

centre height: 240 mm Distance between center: 1000 mm control: Siemens greates pass round over bed: 490 mm Swing diameter face slide: 195 mm throat: 520 mm spindle cone MT: 6 ( Innenkegel 70) spindle diameter in front bearing: 100 mm spindle bore: 63 mm Torque: 736 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107: sheet metal working
approved
dealer
New in: used
Price: request quote
Location: 4661 Roitham
Seller: ZIEGLER Maschinen & Werkzeuge

Voest Alpine BT8x2500 - plate shear Sheet thickness: 8 mm cutting length: 2500 mm throat depth: 400 mm stroke rate: 21 / min main motor: 7,5 kW dimensions WxHxD: approx. 3100 x 2300 x 2500 mm weight: approx. 8000 kg

Category: 1010: loaders
approved
dealer
New in: 1983
Price: request quote
Location: Land-at AT
Seller: Kleinheider Baumaschinenhandel GmbH

17,5 to; Power [PS]: 157; Gross weight [kg]: 17340; Engine: MAN

Category: 102: lathes
approved
dealer
New in: 1990
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Max. swing: 570mm, max. turning diameter: 340mm, max. workpiece length: 1000mm, max. workpiece weight: 1t, rotational speed: 1-2500/min, center height: 280mm, center width: 2000mm, quill stroke: 160mm, quill diamter: 70mm, spindle opening: 63mm, length: 2700mm, width: 1700mm, height: 1800mm, weight: 2.8t.

Category: 102: lathes
approved
dealer
New in: 1990
Price: 5.000 €
Location: Land-de Germany, 95643 Tirschenreuth-Wondreb
Seller: Zölch GmbH & Co. KG

Built in 1990 Uddin überBettschlitten 540 mm Circulation over cross slide 450 mm maximum turning length 1000 mm maximum workpiece weight 1250 g Spindle bore 77 mm 2 revolver Forkardt feed 315 mm, size 8 Connection value 65 kVA Weight 8000 kg Chip conveyor The machine comes from an operating Sau rafts. A Besichtigunmg power is not possible, because the machine at a forwarding agent is stored.

Category: 102: lathes
approved
dealer
New in: used
Price: 8.000 €
Location: A - Oberösterreich
Seller: AUER

Category: 102: lathes
approved
dealer
New in: 1989
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 480mm, z-travel: 2170mm, turning diameter: 610mm, rotational speed: 16000/min max., spindle diameter in front bearing: 240mm, bore diameter: 165mm, feed rate: 5000mm/min, rapid traverse: 10000mm/min max., swing over sledge: 610mm, swing over bed: 750mm, turning length: 3000mm, control: Siemens 810.

Category: 1200: machines and plants for process engineering
approved
dealer
New in: 1996
Price: 490.000 €
Location: Land-pl PL
Seller: NETBID Polska Sp. z o.o.

Operating time approx. 7 years Construction continuous casting plant, 2 strands Segments radius / casting bow 7000 mm Strand cutting device 2 GEGA torch cutting machine with powder additive Burner for emergency tapping 2 GEGA burners, permanently installed, pivotable model Casting dimensions Square: 100 x 100, 160 x 160 Round: 150, 180, 200 Flat: 100x240 Casting capacity as per the manufacturer Dimension 100 x 100, ca.16,7 t/h Dimension 160 x 160, ca. 22,00 t/h Dimension 110 x 250, ca. 24,6 t/h The continuous casting line consists out of the following devices: Tudish Casting rate control Ingot molds Oscillator, electromagnetic stirr ...

Category: 102: lathes
approved
dealer
New in: 1978
Price: request quote
Location: 4661 Roitham
Seller: ZIEGLER Maschinen & Werkzeuge

Voest DA180 - 180/52/800 control & spindle lathe Top width: 800 mm Tip height: 180 mm Turning diameter over bed: 380 mm Swing over carriage: 200 mm Quill recording: MK4 Spindle bore: 52 mm Bed width: 330 mm Speeds: 12 Speed range: 33-1500 rpm Feed speed: 0,072 - 0.54 mm Metric threads: 0.5-3,756 mm Inch thread: tpi 6.75-46 Motor power: 3 kW Voltage: 400V Dimensions WxHxD: CA. 2000 x 1400 x 1000 mm Weight: approx. 1200 kg Facilities: 3-axis digital display, 3 - jaw Chuck, bevel wheel, coolant system, Chuck guard, tracking grains, quick-change holder, lighting system u.m..

Category: 102: lathes
approved
dealer
New in: used
Price: request quote
Location: 4661 Roitham
Seller: ZIEGLER Maschinen & Werkzeuge

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

Category: 102: lathes
approved
dealer
New in: 1977
Price: request quote
Location: 4661 Roitham
Seller: ZIEGLER Maschinen & Werkzeuge

Voest DA210 - 210/48/1000 universal lathe Top width: 1000 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 18 Speed range: 21-1500 rpm Feed speed: 0.068-3,805 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: CA. 2300 x 1400 x 900 mm Weight: approx. 1900 kg Facilities: 3 - jaw Chuck, coolant system u.m..

Category: 102: lathes
approved
dealer
New in: 1975
Price: request quote
Location: 4661 Roitham
Seller: ZIEGLER Maschinen & Werkzeuge

Voest Apollo 520 - 260/71/1500 universal lathe

Category: 102: lathes
approved
dealer
New in: 1991
Price: request quote
Location: D - Nordrhein-Westfalen
Seller: ATMH Werkzeugmaschinen-Handel GmbH

Category: 109: other metal working machines
approved
dealer
New in: 2011
Price: 50 €
Location: Lager Solingen
Seller: G. Folmer Industriebedarf

type Voest DA

Category: 102: lathes
approved
dealer
New in: 1990
Price: 9.590 €
Location: D - Bayern
Seller: Zölch GmbH & Co. KG

; ready for use

Category: 504: sieving machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE Oberleichtersbach
Seller: ENDERS Produktion GmbH

Screen surface: 1000 x 3000 mm, semi mobile steel structure with discharge chutes

Category: 1300: other machines and plants
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

CONTINUOUS STEEL CAST SLAB PLANT - 1.0 MILL. T/ANNUM, 1. Pulverised Coal Injection Plant (PCI) 2. Sinter Plant 3. Blast Furnace 4. Basic Oxygen Steel Making Plant 5. Ladle Arc Furnace 6. Voest Alpine Twin Strand Continuous Slab Caster (CC2) 7. Demag Single Strand Continuous Slab Caster (CC3)

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-pl PL
Seller: Industrio Service

Used hydraulic press made by Voest. The maximum pressure of 100 T. Maximum lifting height 80mm. 100 mm stroke position, adjustment of 0.5 PS 3000U / min. The motor of 15 PS - 11 kW 1500U / Min. Operating pressure 275kg / cm2 max.

Category: 102: lathes
approved
dealer
New in: 1978
Price: request quote
Location: Land-de DE Wiesbaden
Seller: Kurt Steiger Werkzeugmaschinen GmbH

Tip height: 500 mm top width: 4000 mm circular diameter: bed 1020 mm spindle bore: 152 mm taper tailstock: 6 MK spindle speed: 0.9-710 rpm feeds: longitudinal/plan 0,095 22.4/0,9425-12 mm / U thread pitches: 1-224 mm electrical connection: 380 V, 5/37 kW space: 6550/7200 x 2300 x 1900 mm weight: approx. 11000 kg

Category: 102: lathes
approved
dealer
New in: 1975
Price: 6.900 €
Location: Land-at AT Gmunden/ Oberösterreich
Seller: ZIEGLER Maschinen & Werkzeuge

Voest DA 210/48/1000 mm, transmission Top width 1000 mm Tip height 210 mm Swing over plan 280 mm Swing over bed 420 mm Swing bend approximately 430 mm Spindle bore 48 mm Speeds 33 1500 U/min Metric / inch thread Quill recording MK4 3 jaw Chuck 250 he No faceplate Schnellwechsellhalter Bezel yes no Coolant system no NO lights Motor approx. 4,0 kW Weight approx. 1200 kg BJ. approximately 77 L = 2200 mm T = 0800 mm H = 1100 mm Ready for use

Category: 107: sheet metal working
approved
dealer
New in: 2009
Price: request quote
Location: Land-de DE Sachsen
Seller: ZOMA Maschinenhandel

CNC plate format machine with stacking device, from site Manufacturer: Voest Alpine Year of construction: 1988 / 2009 modernized and overhauled Blechdicke: 0,5 ... 3,5 mm Blechbreite: max. 1250 mm Material tensile strength 340.600 N/m ^ 2 CNC control: updated 2010 on CNC Rexroth Connection value, total: 175 kW Total weight: 32 tons of main components of the system: Down winding spreader pin reel with pressure roller and wagons and lifting station mandrel diameter: 470/620 mm load capacity 8T Band width: 1250 mm Outside diameter: 1600 mm Reel displacement: 1900 mm Wagons for 2 coils coil  ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)