vise used for sale

cutting diameter: 225 mm saw band length: 2450 mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x ,09 mm band speed: 46 / 92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: li. 160 / re. 145 mm capacity 45 degrees: flat: li. 140 / re.125 mm capacity 45 degrees: square: li. 155 x 115 / re. 150 x mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 90 mm motor: 0,7 / 0,81 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 1,2 x 1,1 x 1,5 m Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutti ...

saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor power: 1.1kW/230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Band saw speed: 22 / 31 / 55 m/min; Band saw dimensions: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage version Separate emergency stop Impact switch low-voltage electronics 24 V Low-noise running Mobile machine base Ball-bearing saw blade guide Three speed levels for a wide range of material selection Microswitch for automatic limit shutdown Easy-to-read angle adjustment scale Standard with high-quality bi-metal band saw Saw blade tension adjustable on the front side via handwheel Adjustable material stop for serial work quick-release vise for fast workpiece clamping

cutting diameter: 330 mm saw band length: 4640 mm cutting width: 510 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 45 degrees: flat: li. 350 x 320 / re. 380 x mm capacity 45 degrees: round: li. 320 / re. 320 mm capacity 45 degrees: square: li. 320 / re. 320 mm capacity 60 degrees: flat: li. 230 x 310 / re. 250 x mm capacity 60 degrees: round: li. 200 / re. 200 mm capacity 60 degrees: square: li. 200 / re. 200 mm weight of the machine ca.: 1,19 t total power requirement: 4,0 kW Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice clo ...

Offer 23240 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Tapping device up to M 27 - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - Drilling spindle speeds infinitely variable from 60 to 1600 rpm - 3 feeds electr. Magnetic indentation 0.1 ; 0,16 ; 0.25 mm/rev - Projection 290 mm - Max. distance between drilling spindle and table 790 mm - Max. distance from drilling spindle - base plate 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank - Table left + right tiltable - Drive with reinforced motor 400 V / 1.6 / 2.9 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - With: - Coolant device in base plate - Quick-release drill chuck 1-13 mm - Emergency stop button -Lighting - Machine ...

Pipe vice, round vise PAGUS jaw width: 125 mm Ø min: 8 mm Ø max: 100 mm Base plate: 220 / 255 x 220 mm used, tested ! Dimensions: 400 x 220 x 220 mm

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Key data: 250 mm, 150 mm, 340 mm

- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machine data: - Motor power: 1.4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 9000 x 1700 x 1150 mm - Machine weight: approx. 800 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Table width: 800 mm -Table length: 1000 mm -Table thickness: 35 mm -Table height: 765 mm -Plate: solid cast steel -Groove width: 22 mm -Groove distance: 100 mm -Plate underside: ring T-slot Ø 700 mm M12 -Equipment: with bench vise -Overall dimensions: 1300/1050/H1000 mm -Weight: 472 kg

Hydraulic vice, machine vice, NC compact vice -transfer in current condition as seen -Vise has no spindle and is therefore sold as dismantled -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaw: 200 mm -Hole spacing: 140 mm/Ø 10 mm -Dimensions: 202/18/H75 mm -Weight: 2.1 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Machine vise lower plate, clamping plate, vice plate, turntable -Turntable: rotating plate for vice -T- round groove: Ø approx. 220 x 18 mm -Grad display -Dimensions: 275/340 / H90 mm -Weight: 20.6 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Mounting hole distance: 100 mm -Number: 2 pieces -Price: complete -Dimensions: each 160/14/H50 mm -Weight: 0.8 kg/piece

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 265/185/H50 mm -Weight: 4.4 kg

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 235/175/H50 mm -Weight: 6 kg

mobile workbench, folding workbench, work table, assembly bench -Width: 1000 mm -Depth: 700 mm -Height: 800 mm -Bank vise: 1 -Pipe vice: 1 -Dimensions: 1000/700/H800 mm -Weight: 48 kg

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H65 mm -Weight: 9.7 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Plate thickness: 125 mm -Bank vise -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg

CNC milling machine 2100x4000mm 9kW HEAVY DUTY TechnologieCNC CNC Industry 2.0 2140 ATC The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. ✔The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 9kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as t-groove slots for manual clamping of irregular shapes. ✔ATC - The machine is equipped with an automatic linear magazine wi ...

Ref.No.00806 Name of the lathe Manufacturer: Böhringer Model VDF DUE 560 Year of construction 2005 Control Heidenhain Manualplus 4110 Swing Above the bed 570mm Over the long face slide 365mm In the bed recess 600mm Reliable workpiece weight for normal main spindle Without the use of sticks 500kg For a setting vise 630kg With two setting vices 800kg Main spindle speeds number 24 With normal main spindle 11.2... 2240 min-1 Step jump 1.25 Commuting Face slider 345mm Upper slider 125mm The tailstock quill 190mm Dimensions Tip height over flat track 280mm Electric drive 15 kW Repair A casting was broken in half, customer has repaired it himself with his own means, so that it works perfectly again Condition under power technically ok Documentation In German - Paper-bound Submission date expected August / September 2024

x-travel 3000 mm y-travel 650 mm z-travel 800 mm control Heidenhain 426/430 table dimensions 3.500 x 750 mm turning speed range 7300 U/min with transmission tool taper SK50 tool magacine with 48 Plätzen IKZ KNOLL slewability of milling head + / - 90 integrated rundtisch 750mm 2x made by FIBRO weight of the machine ca. 24 t dimensions of the machine ca. 8,4 x 4,4 x 3,6 m Table max. 2,500 kg load chip conveyor without vise prepared for delivery

It is a CNC profile machining center with compact design Cabinet moving on X-Y-Z-A axes. The spindle unit is positioned and machining independently at any temperature from 0 to 180 degrees. This is the fourth axis feature. It can process all kinds of profiles such as PVC, iron, steel, copper, especially aluminum. Different types of milling bits are used according to the hardness of the alloy it processes. It works freely on aluminum profiles with its fast milling head moving on the steel body equipped with CNC control unit and servo motor and 7-position tool changing magazine. The CADCAM software is a customized tool for “ino machinery” profile machining centers. The pneumatic reference point at the head of the machine is automatically removed and determines the zero point of the profiles.Profile clamping pneumatic clamps are offered as standard in the machine in 6 piec ...

Miscellaneous machine vices.A - Machine vice hydraulically used, with turntable, white, prism jaws, Jaw width: 200mm, clamping length: 350mm Dimensions: L- 70cm , W- 32cm , H- 20cm , Price : € 800,- C - Machine, grey, jaw width: 125mm, clamping length: 225, with turntable and Stop, sgt. Condition, L-50cm, W-30, H-14cm, Price: 580,- D - Grey ARNO, jaw width: 90mm, clamping length: 200, sgt. Condition, with turntable L-45cm, W-23cm, H-11,5cm, Price: 480,- F - vise – grinders, width: 100, clamping: 145, H: 80 (40)mm L-13cm, W-10cm, Price : 200,- G - Grey, mechanical, 2 pcs. W-width: 110 / 105mm, L-36cm, W-25, H:12cm P: 150,- We are also happy to offer you new machine vices (Bernardo) !

Key data: 350 mm, 200 mm, 360 mm

Quill stroke 50 mm Dimensions approx. 120 x 120 x 150 cm Weight approx. 850 kg 12 spindle speeds from 50 - 2240 rpm 18 feeds from 8 - 400 mm/min Rapid traverse 1400 mm/min in all axes Travel X/Y/Z 350/200/360 mm Tool holder ISO 30 incl. accessories: Heidenhain digital display, Vise with 100 mm jaw width new

Hurmak Zenith 200 Plastic injection moulding machine The machine screw sleeve is in the new condition, it was newly built. Machine dryer and loader are included in the price. Machine injection unit is servo. VISE FORCE: 2000 KN TOTAL POWER: 37KW ENGINE POWER: 30 KW RESISTANCE POWER: 7 JANUARY DIAMETER: 45 TOTAL WEIGHT: 5.2 TON

Offer 23401 Specifications: - Table size vertical: 800 x 220 mm - Angle table 800 x 395 mm - Working range of axes - X (longitudinal) Autom. / Hand 630 / 650 mm - Y (landscape) Autom. / Hand 430 / 450 mm - Z (vertical) 400 / 420 mm - min. / max. distance milling spindle – table surface approx. 10 - 430 mm - Tool holder ISO 40 - 12 working spindle speeds 45 - 2000 rpm - Feed rates X ; Y ; Z infinitely variable 10 - 4500 mm/min - Drive spindle 400 V / 4.0 kW - Space requirement approx. W 2450 x H 1850 x D 2470 mm - Weight approx. 1500 kg - With: - Movable vertical milling head with drill quill - Vertical milling head can be swivelled left + right - Handwheels for X ; Y ; Z - Axes - Control HEIDENHAIN TNC 135 - Coolant device - Hydr. Machine Vise

Cross table Drilling Milling machine SYDERIC S 120 UB Spindle: Ø 55 mm Cone: SA30 Spindle exit: 130 mm Spindle speed: from 125 to 2150 RPM Table size: Length 500 mm x Width 310 mm Table travel: X: 400 mm / Y: 230 mm Maxi distance spindle nose/table: 350 mm Throat depth: 210 mm Motor: 1 CV Manual descent of spindle Column rotation: 360° Accessories: Delivered with 1 small vise + 3 cones SA30/CM2 Voltage: 380 V Width: 1000 mm Depth: 1200 mm Total height in height position: 1800 mm Weight approx 700 kg

• Manual operation • Good properties for profile cuts • Adjustment of the cutting angle via backlash-free tapered bearings • Quick clamping device • Precise belt guide, with ball bearings and carbide inserts • Electric coolant pump Specifications • Stop: 2000 mm • Power: 400V 2.7 A • Engine: 0.8 – 1.5 HP • Cutting speed: 40 – 80 m/min. • Vise opening: 315 mm • Jaw height: 110 mm • Jaw length: 180 mm • Working height: 1080 mm • Mitre cut: 60° right • Dimensions (LxWxH): 870 x 1250 x 1900 mm • Weight: 270 kg

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Specifications: Drilling capacity steel: 24 mm Continuous drilling capacity steel: 20 mm Drill-milling head vertical: +/- 45° Milling head horizontal: +/- 90° Table size: 1370 x 254 mm Travel X / Y / Z - axis manual: 820 / 410 / 400 mm X / Y / Z - axis automatic: 740 / 330 / 320 mm Distance vertical spindle - router table max.: 405 mm Spindle mount: SK40 Projection: 420 mm Speed range, infinitely variable: (2) 60 - 4200 1/min Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04 / 0.08 / 0.15 mm/rev Milling head Y - axis: 470 mm Connection: 400 V Total power: 3 kW Weight, approx.: 1260 kg Dimensions (WxDxH), approx.: 1820 x 1850 x 2230 mm Equipment: - 3-axis digital display - Infinitely variable speed control - Coolant device - Clockwise / anticlockwise rotation - Motorized feed in the X, Y and Z axes - Drilling depth stop and scale - Cross table wit ...

LAGUN GVM-4 SP incl. digital display Fagor incl. hydraulic vise incl. 3-jaw chuck incl. 10 tool holders incl. collets incl. 3 drill chucks Machine works perfectly Machine can be loaded by forklift

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

Offer 23457 Specifications: - Hydr. Lifting - lowering the saw bar - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 215 mm - flat approx. 215 x 170 mm - Cutting range at 45° round approx. 130 mm - flat approx. 130 x 190 mm - Lifting speeds + cutting speeds adjustable - Cutting speeds 16 / 32 m/min - Mitre adjuster. Vise with opening width up to 260 mm - E.-Mot. Coolant system - Drive 400 V / 0.85 kW - Space requirement approx. W 500 x H 1250 x D 1200 mm - Weight approx. 160 kg - Roller conveyor 1000 mm

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid version, with drawer and vice -Workbench: 2000/720/ H940 mm -Vise: 460/160/H175 mm -Clamping jaws: 150 x 25 mm, clamping width: 195 mm -Total weight: 122 kg

- Table: 600 x 210 mm - X stroke: 300 mm - Y travel: 150 mm - Z stroke: 340 mm - 16 spindle speeds from 40 to 2000 rpm - Vertical and horizontal SK40 taper spindle - Sensitive micrometric drilling head, 60 mm stroke - Swivel head - Automatic variable electric feeds - Power supply: 3-phase 380V - Heidenhain 3-axis visualization - Integrated coolant system - Lighting system - Milling vise - SK40/L20 collet holder - Drill chuck SK40 - Adapter for drill bits SK40/CM3 - Set of milling cutters - Clamping elements - Bracket and clamp set 3R - Very good condition

Clamping range Ø 15–160 mm Max. workpiece weight 15 kg Weight of the prism vise 3.0 kg

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

- X: 560 mm - Y: 320 mm - Z: 400 mm - Clamping surface: 450 x 950 mm - Quill stroke: 100 mm - Speed range: 25 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 3 kW - Total power: 3.5 kW - Machine weight: 1,800 kg - Space requirements (W x D x H): 1.5 x 1.8 x 1.8 m Details automatic feed in all axes, beautiful machine, good condition, ready for immediate use Accessories Vise, counter holder, various mounts, various collets, documentation

cutting diameter: 227 mm saw band length: 2455 mm table height: 840 mm cutting width: 260 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm capacity 90 degrees: round: 227 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 260 x 220 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 145 mm capacity 45 degrees: flat: 200 x 220 mm total power requirement: 1,5 kW weight of the machine ca.: 0,25 t Dimensions (LxWxH): 0,8 x 1,4 x 1,5 0 Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number: 9712 Control: SIEMENS SINUMERIK 820M Table dimensions: 800 x 390 mm With 6 slots and an attached machine vise (jaw width: 100 mm) and a three-jaw chuck (diameter: 110 mm) Tool holder: SK 40 Travel distances: X: approx. 400 mm Y: approx. 400 mm Z: approx. 400 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,000 mm

Vice for cold circular saw, saw vice -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg