We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,273 used machines on RESALE, but how to find them? Machine Search
used
Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg
used
Bench vise, locksmith vise, parallel vise -Jaw width: 150 mm -Span width: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg
used
Machine vise, sturdy vise, drill vise -Jaw width: 200 mm -Back height: 63 mm Clamping depth: max. 170 mm -swiveling -Dimensions: 530/330/H170 mm -Weight: 67 kg
used
Machine vise, sturdy vise, drill vise -Manufacturer: Cekaba, machine vice type Bon size 4 -Clamping jaws: 160 x 50 mm -Clamping depth: 220 mm -Groove: 140 x 18 mm -Dimensions: 540/260/H105 mm -Weight: 30 kg
used
size of profile - max.: 150 mm Number of drilling agregates: 1 Stk. bore diameter: 35 mm quill stroke: 140 mm spindle taper: MK 4 column diameter: 120 mm throat: 300 mm distance spindlenose - table min./max.: 50 / 600 mm spindle turning speed range: 14 / 45 - 1650 U/min impact length: 3000 mm base plate: 420 x 420 mm Max. speed ot the feeder: 200 mm/sec. positioning accuracy: auf 3 m +/- 0,2 mm air consumption: 6 bar boring motor: 1,5 kW Carrying capacity feeder: 45 kg Control: weight of the machine ca.: 500 kg dimensions of the machine ca.: ca. 2,5 x 0,7 x 2 m CE signed: Condition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Cooling equipment (Micro-Cooler): Luft - Öl Protection made in plastic: Controlled SERIES DRILLING MACHINE used very little with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe a ...
new
VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78
used
Key data: 260 mm, 2460 mm
Exhibition machine Metal band saw on base. The machine is used professionally for smaller saw cuts. The saw blade tension can be adjusted by hand. Vise with quick-release option. No vibrations due to the heavy saw bar. The machine is equipped with a 2-stage motor, bearings for optimal saw blade guidance. The saw blade pressure is adjustable by means of a hydraulic cylinder. Technical description: Motor power 1.1 /0.59kW (2 stages) Sawing capacity 45° round 150 mm Sawing capacity 45° square 145 mm Sawing capacity 60° round 90 mm Sawing capacity 60° square 85 mm Sawing capacity 90° rectangular 260 x 110 mm Sawing capacity 90° round 220 mm Sawing capacity 90° square 220 mm Saw blade size 2460 x 27 x 0.9 mm Voltage 400 V Net weight 210 kg Execution: Machine stops automatically after the cutting process is completed With coolant device Quick-release v ...
used
cutting diameter: 260 mm saw band length: 3660 x 34 x 1,1 mm capacity 90 degrees: flat: 280 x 260 mm vice: 280 mm turning speed range:: 20 - 120 m/min work height max.: 660 mm voltage: 400 V total power requirement: 3,75 kW weight of the machine ca.: 1700 kg. dimensions of the machine ca.: 2000 x 1520 x 1240 mm New price ~ 18.000 euros very few operating hours (!) Furnishing: - 2-column guided band saw - fully automatic - Fully automatic vise system - Feed unit ensures accurate positioning of the material Feed length - single stroke : 400 mm - hydraulic vise clamping - hydraulic saw blade tensioning - 34 mm wide band saw blade. - Infinitely variable speed adjustment of the saw band - automatic chip conveyor - Spare bandsaw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 350 x 32 mm cutting diameter: 115 mm stroke: -- mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: li. 110 / re. 110 mm capacity 45 degrees: square: li. 95 / re. 95 mm capacity 45 degrees: flat: li. 125x95 / re . 125x95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 90 mm total power requirement: 1,8 / 2,5 kW weight of the machine ca.: 375 t dimensions of the machine ca.: 700 x 900 x 1800 m -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA, ...
used
Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet, clamping device -Manufacturer: VEB, clamping device type TGL30-10206 -Size: 100 x 60 mm -Clamping height: max. 70 mm -Dimensions: 180/160 / H135 mm -Weight: 7.2 kg
used
Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet -Part head -different pitches -Tensioning sleeve: Ø mm -Dimensions: 230/210/H120 mm -Weight: 9 kg
used
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
used
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...
used
J.Vuille-Biel -blade circular saw machine: D. 160 mm -vise max. opening 30 mm -with or without feed / stroke max. 640 mm -roll band: 2000 mm -coolant system -machines size: 2400 x 650 x 1340mm -Controlled by air
used
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...
used
Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...
used
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
used
Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional ...
new
Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...
new
VakkuCar3 Bench Planer Modern mobile workstation with vacuum clamping device and height adjustment. Make your workplace on your workpiece. Vacuum flat suction; d = 190 mm Flat suction pad 250 mm x 80 mm Flat suction 240 mm x 45 mm built-in socket for auxiliary equipment Size 1800 x 800 mm Height-adjustable 874-1074 mm G & FE-VAKUUCAR-3 Extras: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78
used
Aluminum circular saw Fabr. MEP type Cobra 350Fabr. -No: 021746 LRX year 1993Cutting area 0 ° round: 120 mmCutting area 0 ° square: 105 x 105 mmCutting area 0 ° flat: 180 x 70 mmCutting area 45 ° round: 120/110 mmCutting area 45 ° square: 100 x 100/95 x 95 mm mmCutting area 45 ° flat: 135 x 60 mmSaw blade speeds: 1700/3400 rpm.Vise opening: 180 mmDrive power: 1.5 / 2.2 kWWeight approx. 160 kgWith- 2 hours. pneum. tensioners- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm
used
Hydr. Pipe expanding machine Fabr. IBP Pedrazzoli Fabr. Stern Brown 65Year 1984Pressure force: 16 tMax. Pipe size: 300 x 1.9 mmWorking speed: 60 mm / sec.Return speed: 110 mm / sec.Max. Mandrel stroke: 190 mmDrive power: 15 hpPower connection: 380 V / 50 HzExternal dimensions L x W x H: 1800 x 1200 x 1500 mmWith- 10 sets of tools 160 - 300 mm- separate control cabinet with controlsxa0xa0xa0 On / off, vise open / close, head back / forth,xa0xa0xa0 Pause / Emergency- FootswitchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg
used
No. 3934: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 1, with active digital display ARB.-ber.: 300 x 160 x 340 mm, power: 1,5 kW Accessories: universal table hydraulic machine vise Tool Cabinet Other: Toolholder SK 40 RPM 2000 RPM
used
Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Oven 650C inner1.5x1.5x2m t max 650 Celsius could be various inner size and temperature range PLC Top quality Wärmebehandlungs Kammeröfen Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haub ...
new
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Metal circular saw Fabr. MEP type Tiger 300Machine -No: 004968 / RPDCUTTING AREAS:0 ° round: 90 mm0 ° square: 85 x 85 mm0 ° flat: 150 x 70 mm45 ° round: 90 mm45 ° square: 85 x 85 mm45 ° flat: 90 x 60 mm60 ° round left: 60 mm60 ° square left: 60 x 60 mm60 ° flat left: 60 x 80 mmSaw blade size: 300 x 32 x 2.5 mm2 speeds: 30/60 rpm.Vise opening: 155 mmDrive power: 1.5 / 1.8 kWWeight approx: 215 kgWith- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Milling machine Aciera F3 Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed on the X-axis Manual gear on the X-axis Feed of the Y-axis can be optionally between threaded spindle or rack and pinion Fraeskop 360° drehbahr Tilting table li and re 30° rotate Engine brake Kuhlmittelpumpe With vise With tool holder with collets CE marking
used
UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...
used
thickness of jaw: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: m machine vise, hydraulic clamping length 260mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 350 x 32 mm capacity 45 degrees: round: 110 mm capacity 60 degrees: round: 90,0 mm capacity 90 degrees: square: 95,0 mm capacity 45 degrees: square: 95,0 mm capacity 60 degrees: square: 90,0 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 90 degrees: round: 115 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min weight of the machine ca.: 375 kg Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The large turntable with internal table clamp & Precision stops at 0/45/60 ° ensure quic ...
used
Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 230 mm : 210 mm Capacity 45° rectangular: 270 x 200 mm : 170 x 170 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150 x 100 mm capacity 60 degrees: square: 100 x 100 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 2,0 kW weight of the machine ca.: 476 kg dimensions of the machine ca.: 1,73 x 0,77 x 1,46 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellent price-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (not BMSY 270 DGH ) • Hydraulic clamping of the horizontal vise • auto ...
new
cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 450 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 280 x 200 mm : 320 mm : 320 mm : 420 x 320 mm speeds steplessly adjustable: 20 - 100 m/min table height: 860 mm total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 1,15 x 2,14 m DG series horizontal bandsawing machines are ideal models for angle cutting of materials with varying number of cuts.It is possible to cut at variable angles between +45° and -60° by giving angle to the upper body of the machine.That machine makes the cutting hydraulically and automatically going up to the height after the cutting.The material is fed manually to the lenght stop and the cut is repeated. Standard Features: Saw Blade 34 Inverter ...
new
: 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 280x200 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 180 mm capacity 45 degrees: flat: 180x180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 110x110 mm dimensions of saw-band: 2950 x 27 x 0,9 mm output: 1,5 / 1,8 kW Weight: 435 kg dimensions: 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...
used
Circular Saw - Feed Unit Make EISELE Type SU 073Fabr. -No: 0739 built in 1988Max. Feed length: 920 mmBaking height: 65 mmOpening width of the vise: 200 mmDimensions: 1350 x 900 x 1150 mmWith- double repeating deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Metal circular saw (chop saw) make IPB Pedrazzoli type Brown MasterSaw blade diameter: 275 mmMiter adjustment via turntable: 0 - 45 ° left2 saw blade speeds: 55/85 rpm.Drive power: 2.5 / 3 kWSpeeds Engine: 1400/2870 rpmExternal dimensions W x D x H: 1000 x 650 x 1800 mmWeight approx: 200 kgWith- on underframe- Quick-action vise- Length stop- Cooling device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Transportable metal circular saw make EISELE type TKS - G / 225Machine -No: 2254 Year 1985Saw blade size: 275 mmCutting area 90 ° round: 90 mm: 90 ° square: 80 x 60 mm: 45 ° round: 60 mm: 45 ° square: 60 x 40 mmSaw blade speed: 58 rpm.Vise swiveling: 90 - 45 °Drive power: 0.65 kWPower connection: 220 V / 50 HzWeight approx: 38 kgOutside dimensions approx: 640 x 320 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0,9 mm height of material-table: 950 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...
new
thickness of jaw: 150 mm : 50 mm clamping width: 150 mm length in total: 420 mm weight of the machine ca.: 25,5 kg dimensions of the machine ca.: 420 x 150 mm Best selling universal vise Bake pressure down Clamping force up to 40 KN High tolerance 60 / 62 HRc Accesories: - Heart plates - Key - Interchangeable workpiece stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
thickness of jaw: 125 mm : 40 clamping width: 125 mm length in total: 345 mm weight of the machine ca.: 12,9 kg dimensions of the machine ca.: 410 x 125 mm Best selling universal vise Bake pressure down Clamping force up to 40 KN High tolerance 60 / 62 HRc Accesories: - Heart plates - Key - Interchangeable workpiece stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 225 mm saw band length: 2455 mm table height: 850 mm cutting width: 245 x 150 mm cutting speed: 45/90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 90 mm : 90 mm : 145 mm Impact energy: 145 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,2 t dimensions: 1,43 x 0,72 x 1,7 m - Miter cuts up to 60 ° left -Vise with quick release device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
thickness of jaw: 200 mm : 65 mm clamping width: 200 mm length in total: 655 mm weight of the machine ca.: 74 kg dimensions of the machine ca.: 655 x 200 mm Best selling universal vise Bake pressure down Clamping force up to 40 KN High tolerance 60 / 62 HRc Accesories: - Heart plates - Key - Interchangeable workpiece stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 250 mm saw band length: 2950 mm table height: -- mm : 280 mm : 2950 x 27 x 0,9 mm : 280 x 200 mm : 230 mm : 190 mm : 180 x 180 mm : 180 mm : 120 mm : 110 x 110 mm : 110 mm : 36 / 72 m/min : 1,5 / 1,8 kW powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and m ...
new
cutting diameter: 300 mm saw band length: 3320 mm table height: -- mm : 330 mm : 40 / 80 m/min : 3440 x 27 x 0,9 mm : 280 mm : 260 mm : 380 x 260 mm : li 260 mm : li 250 mm : li 300 x 200 mm : re 200 mm : re 180 mm : re 230 x 160 mm : 180 mm : 170 mm : 200 x 170 mm : 870 mm : 1,5/1,8 kW : 0,7 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large ...