vibra ram used for sale

Manufacturer: OKU Type: VZ 750 K-R Plate diameter: 750 mm Adjustable vibration

Vibration feeder #4868 Manufacturer: EAR Type: VF 500 L Plate diameter: 770 mm Adjustable vibration

Russell Finex Vibratory sieve Model: 15555 Serial: 1006 Stainless vibratory sieve with stainless mesh, mesh diameter 900mm, side discharge chute, 3Ph

Manufacturer: Knauer Year of construction: 2017 Tilting device: Hywema KV 12 Location: Kaiserslautern External dimensions: approx. 2668 x 2140 x 4752 mm Width feeder: 2.25 m Width: Output: 1.95 m Nominal voltage tilting device: 400 V Rated power tilting device: 2.2 kW Motor/pumping hydraulic system: 5.8 l/min; 160 bar; 1.5 kW; 1445 rpm Payload travel trolley: 4000 kg Payload tilting device: 1250 kg Payload vibrating channel: 250 kg/m² Weight of carriage: 2550 kg Weight tilting device: 1450 kg Weight vibrating channel: 1650 kg Mounting: Attachment to the hall floor The conveyor system served as a feed to a continuous washing system in an automotive plant. We will be happy to send you further information and pictures on request!

Finishing machine / trough vibrator make WALTHER TROWAL type TA 1/33050307, built in 1961, rectangular shapeTechnical specifications:Internal dimensions L x W x D: 880 x 550 x 680 mmFilling weight approx .: 330 lSpeed range: 1000 - 1900 rpm.- adjustment via handwheelDrive power: 11 kWExternal dimensions L x W x H: 2600 x 1250 x 1750 mmWeight approx: 2255 kgwith- Rubber coating of the built-up container so far obviously okay- Whetstones in the container- Electric switch box on the machineused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer: Mucki Year of construction: ca. 1993 So far at an automobile manufacturer in use in a plant for feeding electroplating drums.

Stable stand sieve swing sieve with 3 decks for wood chips and sawdust. Screen area per deck 8 sqm. Inlet and spouting. Stable drive and steel substructure. Drive motor 5.5 KW. Service flaps. Total length approx. 7.0 m.

Vibration sieve,stainless steel,Retsch AS 200 Basic,6 pcs Ø 200 screens.

Vibration sieve,stainless steel,Allgaier,2 fractions,Ø 1600 mm.

Vibration weigher,stainless steel,Engelhardt Type AW120/A. DSP-2,0-1000 g.

Vibration weigher,stainless steel,ZEUYA type MG-200,dosage 0-200 g.

Vibration shoot,stainless steel,on wheels,L 1600 x W 350 mm.

Vibration pipe,stainless steel,Allgaier AFRU,Ø 220 x L 2900 mm.

Vibrating de-duster,stainless steel,vibration shoot,with 50 l. hopper and net.

Vibration pipe,stainless steel,Ø 350 x 5500 mm

Vibration pipe,stainless steel,AEG type R1600/324,Ø 320 x L 1950 mm.

RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.

Vibration damper, compensator, damper -Mounting: on pumps, compressors, valves -Machines for: noise damping and absorption of small vibrations -Size: DN 100 -Number: 2x available -Price: per piece

Fully automatic system with 1 vibrating press locksmith BH 30 For production e.g. : - Concrete blocks, bricks, partition bricks - Soundstones -Curbs - Fireplace stones -Gutter - Ceiling stones, etc. - Stationary vibropress BH 30 with two filling parts for two-layer products - Chain conveyors for fresh side - Sliding tracks for dry side - 1x mast and 1x lowering scaffold - Kuboter for the removal of hardened stones from the return transport on the parcel transport - Production pallets 1400x800mm – 0 pcs Product height : from 55 to 550 mm The new automation : Siemens S7 The control of the vibrator with frequency converter Incl. approx. 5 pcs, different shapes Fully automatic system with 1 vibropress locksmith BH 30 for production of for example concrete blocks, wall stones, partition stoner -Sonic Stones -curbs -fireplace stones -Gutter -ceiling stones -stationa ...

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 1000 mm Width: 455 mm Number of speeds: up to: 1400 rpm Appropriated for: deburing Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.25 kW Overall dimensions machine: Length: 1400 mm Width: 800 mm Height: 1650 mm

- Please note! Price per piece! - Suitable for several motors - LS-4000 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes int ...

Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted

Size: 2.000 x 6.300 mm - Year of Manufacture: 2003 - With frame

Size: 2.200 x 6.800 (5.750)mm - Year of Manufacture: 2002 - 2 Decks - Included: 18 kW Electrical motor, Cardan shaft and Springs.

Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.

OVERHAULED - Size: 1.400 x 3.000 mm - With Electrical motor, Cardan shaft and Spring elements.

Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.

Size: 1.400 x 2.400 mm - Included: Electrical Motor (4 kW / 1.060 RPM) and springs - Will be overhauled, sandblasted and painted.

OVERHAULED - Size: 1.500 x 2.000 mm - Included: Electrical motor and springs

Widthness: 1.500 mm - 6 Decks - 2 Pcs. Unbalance Motors (3,6 kW / 1.430 RPM) - With frame and springs

Size: 3.000 x 8.820 mm - Year of Manufacture: 1994 - With part of frame and conveyor belt - Vibrating screen will be overhauled, sandblasted and painted.

Type: VX 2078 - Mach. No.: D 6221 / D 6222 - Year of Manufacture: 2005 - Size: 2.000 x 6.000mm - Included: 2 Pcs. Unbalance exciters, Cardan shafts, 30 kW/750 RPM E.Motor and Springs - Can be sandblasted and painted.

Size: 1.500 x 4.500 mm - Decks: 4 - Included: Electrical motor and springs (Frame not included)

UNUSED - Speed: 3.000 RPM - Frequency: 50 Hz - Voltage: 400V. - Amperage: 41A

OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.

Widthness: 2.000 mm - 6 Decks - Year of Manufacture: 2001 - With 2 Pcs. Unbalance exciters, 15 kW / 970 RPM Electrical Motor and springs.

Vibrating de-duster,stainless steel,vibration shoot,with 50 l. hopper and net.

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 590 mm Width: 300 mm Tank volume: 42 l Number of speeds: up to: 1500 rpm Installed power: 0.25 kW Machine´s weight about: 251 kg Overall dimensions machine: Length: 730 mm Width: 620 mm Height: 1000 mm

Vibration sieve,stainless steel,Haver EML 200,3 pcs Ø 200 mm sieves.

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 996 7 1496 7 1996 Material: NBR/SBR 408 RED and NBR 60 HELL Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Struts Tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 25 by 6mm Material: NBR (FDA) Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)