vibra ram used for sale

STAINLESS STEEL Drive: 1.5 kW, screen area: 580 X 330 mm Cabinet: 900 X 500 mm

Vibrating screening machine Manufacturer Vibro Separator Type VSB No. 07 327 2-deck sieve, stainless steel 3x screen frame without covering Diameter 60 cm Power 0.75 kW

Description: Composed of about No. 8 sensors. Features: X-axis: 1029 mV/g Y-axis: 1023 mV/g Z-axis: 1006 mV/g Last calibration: 2018 Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 5 kg

S/s vibrating gutter with sieve, code: 1098738-00, 70328-01, gutter width: 650 mm, sieve gaps: 2 mm, total dimensions: 1750 mm x 1200 mm x 1480 mm.

Type: 21846, Y.O.M.: 1982, 0.2 kW, U-Trog gutter, top open, magnetic drive: EVS 8, infinitely adjustable, mounted on base, separates round from angular units.

U-trough chute (dimensions: 500mm x 1000 mm long). Magnetic drive: EVS 8 Nr. 1646 with variable speed. On steel construction. Separates round from angular aggregates (rejects).

STAINLESS STEEL, 2 Vibromotors with 2 layers of screen, screen area: 3000 X 800 mm (L X W),. Dimensions: 3,600 X 1,500 X 1,300 mm (+ Vibromotors = + 500 mm) L X W X H

Description Vibro screen with 3 vibrating planes, screen diameter: 900 mm, flat hole diameter 1: 6mm floor: 2 mm floor 3:, power: 1.12 kW, 8 compression springs, dimensions: 1400x1100xh1200

#5000 VIBRATION FEEDER Manufacturer:AEG Vibrationstechnik Type: 0A 1500/900 - MVE 50-4 Electrical power: 400 V Size: 1440 x 1600 x 1080 mm Through size: 890 x 1260 x 220 mm Weight: 158 kg

Manufacturer: TECNO VIBRAZIONI - Year of construction: 2006 - Type: 28482 - Dimensions: 2100x900x2900mm - Strap width: 200 mm - Recording size: 700x700mm - Output size: 200x130mm - Transport speed: 6.0 m/min - Electrical data: 400V; 0.18 W; 0.7A

General SKU319U745 LocationBarneveld MakeAEG vibrationstechnik TypeGA1712/3240-EY No.B60217 Year of constructionunknown Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck Information Total height1,1m Weight750kg Floorspace2x0,7mVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU319U744 LocationBarneveld MakeAEG Vibrationtechnik TypeGA1712/3240-Y No.B602.18 Year of constructionunknown Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck 380Volt, 6,2A Without controlscheck Information Total height1,1m Weight750kg Floorspace2x0,7mVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU231U194 LocationBarneveld MakeTecno Vibracione Venazeti TypeVVC70A 16/14 No.3117/3357/00 Year of construction2000 Main Features MaterialStainless steel Surface0.76 m2 Sizes diameter700 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,76 m² Number of sieve decks:2 Sieve sizesDia: 695 mm InletDia: 275 mm OutletDia: 110 mm (3x) Drive excentercheck Motor1,12 kW,380 Volt Sieve perforation5 mm and 3 mm MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchcheck Weight210kg CEcheck Floor space0,9x0,9m Total height1,05mMinerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer wasteVibro sievesPaper & otherFeed additivesTecno Vibracione VenazetiIndustries > Chemical > ...

General SKU048W211 LocationBarneveld MakeVibra TypeDV-C4/60 No.26380 Year of construction1987 Main Features MaterialStainless steel Length3000 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feeder(1x) Feeder diameter200mm Feeder length3000mm Closedcheck Inletdia. 200mm Outletdia. 140mm With motor0,44 KW, 220/380 Volt (2x) Information Floorspace3,0x0,9 MVibro feedersVibraConveying systems > Vibro feedersBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU239T281 LocationBarneveld MakeApplied Vibration Limited (UK) No.AV11212/13-2 Year of construction2013 Main Features MaterialStainless steel Length2900 mm Width740 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder width740 mm Feeder length2900 mm Closedcheck Inletdia. 390 mm Outletdia. 300 mm, dia. 490 mm With vibro motorcheck (2x) With motor2,2 kW 230/400 Volt Information Total height1,3 m Weight1090 kgVibro feedersApplied Vibration LimitedConveying systems > Vibro feedersBrand > Applied Vibration Limited What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Type: vibrating conveyor Motor : Casadio Power: 0.06 Kw Outlet width: 160 mm Hopper volume: approx. 200 - 250 litres

Manufacturer: Erimaki Model: ERV 1200 Type : Circular vibrating sifter Diameter ? : 1200 mm Mesh size available : 10 mm

Manufacturer : Allgaier Model: VTSF 900 / 3 Year : 1998 Type : Round vibrating sieve Diameter ? : 950 mm Separation decks : 3 Available screens : 2 Mesh size : 20 mm / 25 mm

Sell a vibratory conveyor. Manufacturer Grimm Spaichingen Type RL40 Diameter 600mm Spiral width approx. 45mm Total height on mobile tripod approx. 1450mm Device alone 600380mm high 220V Condition used

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Mettler-Toledo platform floor scale with ramp, platform dimensions approx. 1230 x 1480 mm (WxD), weighing range up to 600 Kg, d=100 g, overall dimensions including ramp approx. 1700 x 2300 x 130 mm (LxWxH) Includes ICS439a Compact Terminal

Rammefilter,rustfrit stål,5 rammer i hus,L 780 x B 355 x H 770 mm.

Rammefilter,rustfrit stål,5 rammer i hus,L 680 x B 250 x H 770 mm.

Rammefilter,Seitz 20 x 20,med 4 rammer

Rammefilter,rustfrit stål,Filtrox type Novox 40/40 max 6 bar

Rammefilter 40x40,rustfrit stål,Seitz for vægmontering

Mobile front axle ramp, butt, 9m long, 10 tons, front side loading - second-hand - : Price ex location: now only 9.950.-€ instead of 14.500.-€ (net)! Manufacturer: Butt Type: BKV109 Year of construction: 2020 Load capacity 10000 Total length: 9,000mm Total width: 2,800mm Ride width: 2,400mm Height fixed at 1,000mm Axle load: 5.000kg Dead weight approx. 4,000 kg. RAL 7016 Hot-dip galvanized special anti-slip gratings The MOBILE FRONT AXLE RAMP has been adapted for a project and has been given a fixed height (it is not height-adjustable). It is therefore not suitable for loading and unloading standard trucks The support points are adapted to the fixed height and the slope at the place of use (see photos). Condition: very little used – like new! Available: now Location: 24558 Henstedt-Ulzburg

ID2752 PVE 5021S with 5t Pilemer hammer year/Year of construction 2002 approx. 7500 hours/hours Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8,9 t, stroke of sliding brace 1500mm, max. hoisting capacity: 6,9 t at 4,6 m – 1,0 t at 11,7 m, Pile winch capacity 6,5 t (adjusted to 9 tons in 2 parts), hammer winch capacity 12,5 t (adjusted to 25 tons in 2 parts), auxiliary winch capacity 4 tons, 6-cylinder Cummins Diesel engine 6CTA8.3C (194 KW) Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8.9 t, stroke of the push strut 1500mm, max. lifting capacity: 6.9 t at 4.6 m – 1.0 t at 11.7 m, capacity of the pile winch 6.5 t (adapted to 9 tons in 2 parts), capacity of the hammer winch 12.5 t (adapted to 25 tons  ...

Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level

Mobile overpass with transport trolley 3390-1750 RA1079 The mobile loading bridge consists of a weather-resistant aluminium hollow compartment profile. It has a anti-slip profilesurface. A movable rear-end tongue compensates for different inclines and thus ensures a flat approach angle. On the underside of the crossing bridge there is a rubber profile, which prevents the loading bridge from slipping. Technical data: Manufacturer: unknown Type: Mobile overpass bridge with transport trolley 3390-1750 Year built: unknown Condition: good (used) Total length: 3390 mm Total width: 1750 mm Capacity: 2000 kg Weight: 130 kg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder  ...

Mobile center axle ramp, Butt, 11,80m long, 9 To., – Used - : Price from location: only 9.500.- € (net), incl. loading! Manafacture: Butt Type: BK912 Year of construction: 2009 Load capacity: 9.000kg Total length: 11,800 mm Total width: 2,300 mm Ride width: 1,960 mm Lip width: 2,140 mm Lip length: 400 mm Straight part platform (top): 2,500 mm Drive-over height: 1,100 - 1,750 mm Optimal movement of the ramp due to centrally arranged floating axle with low manoeuvring requirements Easy adjustment of the operating height via manual hydraulic pump Condition: good – very good Available: now Location: Friedrichshafen

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

Access ramp set -Driveway width: 210 mm -Height: 230 mm -Dimensions: 930/305/H250 mm -Weight: 10 kg

ID2745 Hitachi KH230 year/Year of construction 1994 was overhauled in 2012, engine Deutz BF12L513 (284KW) – changed 3000 hours ago, hydraulic pump for drill, hammer and vibrator drive is a 4-stage constant pump with a capacity of 480 liters at 300bar, basic boom 36 + 2 m extension + 6 m Bär extension, with a choice of 7 t or 9 t BSP hydraulic hammer was overhauled in 2012, engine Deutz BF12L513 (284KW) – changed 3000 hours ago, hydraulic pump for drill, hammer and vibrator drive is a 4-stage constant pump with a capacity of 480 lieters at 300bar, basic boom 36 + 2 m extension + 6 m bear extension, with either 7 t or 9 t BSP hydraulic breaker

Description: defective 2.5 m length Approx. Onsite Dimension. (l x w x h): 2,500 x 400 x 600 mm, weight approx.: 150 kg

Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg

Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg

Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg

Description: Mobile ramp for unloading containers or trucks Capacity: 10,000 Kg Width: 2,065mm Length 10,510 Folding end: 2,100 mm Front hydraulic ramp: 740mm Weight  ,2.500 Kg Approx. Onsite Dimension. (l x w x h): 10,500 x 2,100 x 700 mm, weight approx.: 2,500 kg

x-axis:16000 mm y-axis:1250 mm z-axis:3200 mm total power requirement:37 kW speeds:2000 U/min Soraluce milling machine FR 16000 Angle head pivotable: 2.5° Drive power: 37 KW The machine was completely overhauled in 2009: new cables, new controls. Can be viewed under power at any time - without machine table, without rotary table, without chip conveyor -- is in good condition (inspection under power is possible)

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:1600 U/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored

spindle diameter:160 mm x-travel:6000 mm y-travel:5000 mm z-axis:1500 mm dimension of the ram:470 x 500 mm w-axis:900 mm spindle taper ISO:50 spindle turning speed range:1 -3000 U/min spindle motor:71 kW feed speeds:1 - 5000 mm/min rapid speed:25 m/min total power requirement:187,6 kW dimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 m Machine in mint condition ! with CNC control HEIDENHAIN iTNC 530 autom. toolchanger 80 - pockets CNC Rotary Table 4000 x 4000 mm max. table load 75 to. longitudinal movement V-axis 1500 mm autom. head changer with universal Milling Head universal high speed milling head 5-axis 18000 rpm RENISHAW measuring probe belt filtering unit and through spindle coolant chip conveyor

Type: VK 1056, built 2006. Single deck vibratory bar sizer with integrated feeding chute, bar mount and bar rakes in stainless steel, screen frame rubber lined 60° shore, 2 imbalance drives 2,8 kW / 960 RPM, open screen frame on coils, break control, steel construction. Current parting cut at 8 mm; Sizer has only been running for 12 months, therefore it is in very good condition.

Stainless steel vibrating sieve for wet sieving, 1 deck with 915 mm, 2 outlets, with unbalance drive (approx. 1 kW) and springs. 2 pcs. available.

Vibrating sieve for wet screening, 1 deck with 915 mm (36) Ø, 2 outlets, with imbalance drive (ca. 1 kW) and springs. 2 pcs availabe.

Mogensen twin-sizer with 4 decks (each deck has 2 screen gauzes with a sieving area of 1,32 m x 0,98 m per gauze) and 4 outlets. Incl. 2 imbalance drives (4,0 kW / 380 V each), meshes, covers and supporting springs. Since sieve has a central division wall two separate material streams can be fed (after corresponding adaptation of the outlet hoppers).

Mogensen double-sizer with 4 decks with 2 screen coverings (screen area per covering: 1.32 m x 0.98 m) and 4 outlets each. With 2 unbalance scoundories (each 4.0 kW / 380 V), sieve coverings, lids and support springs. Two different grains can also be given up by means of a middle bar, provided that the outlet housings are adapted appropriately.