vibra ram as used for sale

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, MAX. SIZE: 320 X 420 MM MIN. SIZE: 75 X 150 MM MAX: 180 CYCLES / MIN HIGH PERFORMANCE BOOK SEWING MACHINE AUTOMATIC SIGNATURE FEEDER WITH 4 UPPER AND 4 LOWER OPENERS PLC WITH TOUCH-SCREEN CONSOLE AUTOMATIC OPENING/CLOSING OF FULL FRONT GUARD VERY GOOD CONDITION AVAILABLE IMMEDIATELY

Formats : 75 x 120 mm - 320 x 420 mm Openings : 4 above, 4 below Number of stitch positions : 10 Max. speed :180 c/min

Brand: RENZ Model: inline 60-500cm format Maximum speed: 2200 punching cycles per hour and 1700 binding cycles per hour Dimensions: 5900x2400 cm with hinge Gross weight: 3400 kg supplied with 2 modules: RENZ ASM500 and RENZ ABL500 lit up during the inventory.

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

Automatic sewing machine Headop feeder Electronic programming Monitor with original programs Lovato 4 + 4 signature openings Thread tension control Thread cut off Device Delivery Minimum Book Size : 75mm x 150mm Maximum Book Size : 320mm x 420mm Mechanical Speed : 9000 Cycles per hour (150 per minute)

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute Two similar machines available at the same place !

Lifting kneader extendable Kemper Model: F 100 ASL for max. 160 kg dough/TA 160 (rye mixed bread dough) Stainless steel kettle 240 litres Dough machine with flour dust hood according to HACCP 2 tank cars Stainless steel kneading arm 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty + Spare parts service Option: Delivery & Floor Fastening Maintenance contract E-Box Service Package Instruction & Commissioning Many more lifting kneaders in stock!

Tetra Pak Aseptic Homogenizer 300 – Factory New (2024) High-performance aseptic homogenizer designed for advanced liquid food processing. The Tetra Pak Aseptic Homogenizer 300 delivers exceptional reliability, precision engineering, and high production capacity for demanding industrial applications. Built in 2024 and in factory-new condition, this machine has 0 working hours and has never been installed in production, making it an ideal solution for processors seeking modern aseptic homogenization technology. General Information - Manufacturer: Tetra Pak - Model: Aseptic Homogenizer 300 - Year of Manufacture: 2024 - Condition: Factory new - Working Hours: 0 hours (never installed) Technical Specifications - Maximum Capacity: 12,960 L/h - Working Pressure: 250 bar - Number of Pistons: 3 - Piston Diameter: 63 mm - Valve Design: Mushroom type with stainless steel sea ...

Lastra SM 65 development machine Online Plate Developing Machine for Thermal Metal Plates 65 cm inlet width, incl. cooler cleaned & tested Year of construction 2002 Art.Nr. L986

Used autoclave ASCA, type: 250 E -renewed- - Boiler capacity: 250 litres - Electrically heated - Boiler, core temperature and F-value adjustable - New temperature sensor - New drain hose - Electrics completely checked - Digital control - Auto-signaling - Device on wheels, mobile - Condition: Very good, ready to use The device is in pristine condition and is ready to use right out of the box. Visits and test runs are possible by arrangement.

0: . V 0: . Hz 0: . kW The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

Manufacturer: Astra Aspirazioni Due, Year: 2015, Volume flow rate m³/h: 24000, Filter surface in m²: 180, Qty. filter hoses: 84, Hose diameter in mm!: 200, Length of filter tubes: 3400 mm, Number of filter filter gallerys: 1, Required space L x W x H mm: 1890x7550, Weight approx. kg: 2300 + 1050 (ventilator), Year :2015

Kapp Model AST 203 Hob sharpening machine

with packing device

Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

Digital Grinding diameter 250 mm Grinding length 650 mm Accessories

Serial number: 3112043, Year of construction: 1997, Rated power: 18.5kW, Motor nominal speed: 1500min, permissible operating overpressure: 8 bar, recorded operating hours: approx. 12,008h; further details see photos of the nameplates

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg

A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible.

Schuppenauslage mit integrietrter Presswalzen / Stream Delivery with integrated Pressing MBO ASP 66-2 ME

Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66-2 MESerial-No. 06060608Year 2006

Surface grinding machine, Asyst PNC100 CNC [ELB], 600200, wheel 300 mm 40, The machine is in our warehouse in Gussago BS.

Transport height range: 800mm-1000mm, buffer capacity: 10 blanks, blank length range: 70mm-460mm, blank width range: 50mm-460mm, blank thickness range: 0.3mm-3mm, max. individual blank weight: 2kg, max. total blank weight: 20kg, cycle time (FIFO): less than 15s. Machine dimensions X/Y/Z: approx. 1150mm/1400mm/1550mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

A total of three conveyor belts (transport modules) are available for the PCB industry. 1) Three-segment conveyor belt with buffer module Asys FPS 30, year of manufacture: 1996. 2) Transport module Rommel SM 600 T. 3) Transport module Rommel BM 500 S, year of manufacture: 2000. Documentation available. On-site inspection is possible.

Net weight= 31 kg,

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 171 kg,

Weber Derinder ASC 460, function tested

AGEMA high-speed drilling machine AS 210 The machine is assembled and functional in the showroom. • Well-maintained machine. • Built in 2007 • Tank has been cleaned • Electrode diameter: 0.15 up to 3 mm • Maximum drilling depth: 100mm • Max workpiece weight: 20kg • X, Y, Z travels: 200 x 100 x 140 mm

Blackfriars Rotary Cutter / Granulator Model 12 ASHD/267 With sound booth

Manufacturer: Ascojet Model: 2001RX Type: Dry Ice Blasting Machine Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Hours: 481 Condition: used Location: Bremen

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm turning speeds: U/min main drive motor: 70 kW Control: FAGOR 8070 workpiece weight max.: 20 t column daylight: 3300 mm milling motor: 16 kW feeds crossrail-slide vertical: 3000 mm/min feeds crossrail-slide horizontal: 3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC Control FAGOR 8070 - C-axis (angular positioning of the table) - angular milling Head - Telescopic covers of the cross rail and columns guideways - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.