vf used for sale

4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min) | bag sizes: L(50-250)xW(55-102)mm | film width: 520-900mm | power: 380V, 6,3kW | compressed air: 1,4m?/min, 6bar | machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from appr ...

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Output: 12000 U/h // Bottle Size: 0,5 l, 1l

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

General SKU212W134 MakeTricom Frimafa SWM Typeschudbed VFB 10./3 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&:N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) General No.00064-01 Year of construction2000 Floorspace8,50x1,80 m Total height2,60 m Weight6170 kg Extra information With filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.StarchBiotechnologyAgrochemicalsSpicesCatalysts & f ...

WORKING RANGE -CUBIC-   X-axis travel: 1270 mm   Y-axis travel: 660 mm   Z-axis travel: 635 mm SPINDLE / HEAD   spindle revolutions (max): 7500 /min BASIC FUNCTIONS   number of spindles: 1   number of turrets: 0   live positions: yes   number of c-axes: 0   number of y-axes: 1   number of b-axes: 0 ATTACHMENTS   chip conveyor: yes WORKING RANGE TURNING   swing diameter (max): 635 mm   worpiece length max.: 1372 mm   workpiece weight max.: 1814 kg MAIN SPINDLE   spindle revolutions (min): 0.001 /min   spindle revolutions (max): 7500 /min X/Z SLIDE   Z-axis travel: 635 mm   X-axis travel: 1270 mm   Y-axis travel: 660 mm TOOL MAGAZINE   tool diameter max.: 178 mm   tool length max.: 406 mm   tool weight max.: 13.6 kg

Our state-of-the-art VFFS packaging machine is a generalist and has been developed to optimally support companies looking for the highest quality standards. With outstanding workmanship and a wide range of work, our machine offers intuitive operation that optimizes your packaging processes. The extremely powerful motors and the user-friendly colour touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. For this packaging line, we also offer fully and semi-automatic feeders including weighing systems, which we can also integrate for you at a later date. If you would like to optimise your packaging processes through a strong production output with high quality, we at Impuls Packaging are your ideal partner. Features of the facility 1. Single fi ...

Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...

For sale is an A100 Vertical Form Fill Seal (VFFS) Packaging Machine, complete with: Inclined Infeed Conveyor (for product loading) Outfeed Conveyor (for efficient bag discharge and handling) This is a turnkey automated packing line suitable for a wide range of food and non-food applications. Features: A100 VFFS machine – fully automatic, forms, fills, and seals bags. Inclined infeed conveyor – ensures consistent and efficient product feeding. Outfeed conveyor – transports finished bags away from the sealing area. Stainless steel construction – hygienic and easy to clean, ideal for food production. Compact footprint – space-saving design. Control panel with emergency stop – user-friendly operation. Condition: Machine is in excellent condition and has been used only sparingly. Well maintained, clean, and ready for immedi ...

REF-2476 ULMA ETNA HITECH VERTICAL FORM-FILL-SEAL MACHINE Vertical form-fill-seal machine (VFFS) Manufacturer: ULMA Model: ETNA HITECH 280X Machine no.: 60281145 Year: 2009 Power: 7kW Voltage: 400V Overall dimensions: width 150 cm, length 220 cm, height 200 cm.

General SKU224S098 MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel General No.43164 Year of constructionUnknown Mounted on mild steel framecheck Floorspace4,7x1,6 M Total height3,2 M Weight1800 KgFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us ...

This 3-axis HAAS VF3 SS Machining Center was manufactured in 2017. It features a robust 1219 mm x 457 mm table, capable of handling up to 794 kg. Equipped with a high-speed spindle reaching 12000 rpm and a 30+1 side-mount tool changer for efficient operation. Ideal for precision tasks with rapid movements up to 35.6 m/min on all axes. A great opportunity to buy this HAAS VF3 SS Machining Center. For more information about this Machining Center, please reach out to us.

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - .ucymachines/ Contact us at - sales@ucymachines

Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Bonfiglioli, gear motor -Speed: 22.5 rpm -Gearbox: Type VF30 N P56B14 i= 60 -Motor: Type BN 56 B4 0.09 kW -Design: B3 angle -Hollow shaft: Ø 14 x 55 mm -Protection class: IP 55 -Number: 3x gear motor available -Price: per piece -Dimensions: 260/145/H120 mm -Weight: 4.1 kg/piece

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

The Handtmann VF50 is a smaller sized vacuum portioning machine making it suitable for butchers, pet food producers, small goods producers looking for a reliable and fast way to accurately portioning, straight filling product such as mince& sausage meat, cookie dough as well as being capable of handling a wide range of products. Filling capacity 2,600 kg/h Filling pressure up to 55 bar Portioning and linking capacity: 25 g = 420 port./ min 50 g = 350 port./ min 100 g = 250 port./ min 200 g = 160 port./ min Portioning range: 5 – 100,000 g Hopper Capacity: 80 litres Control system: Digital Monitor Connected load: 4 kW Weight:450kg Dimensions: Width:70 Length: 90 Height: 165

Description 32-page heidelberg Stahlfolder Topline TD 78-6-4-PD with VFZ 52 D and VSA 86 D from 2003 consisting of PD 78-T pallet feeder with tremat and DCT-2000 control 1. Folding unit TD-78 with 6 folding plates 78 cm Downstream cutting shaft Double device 2. Folding unit TD-66 with 4 folding plates 66 cm Downstream cutting shaft equipped with overhauled folding rollers and bearings Mobile folding unit for 32-sided folds Knife folding unit VFZ-52. D

x-travel: 2134 mm y-travel: 1016 mm z-travel: 762 mm CNC-control: HAAS CNC Table dimensions: 2134 x 914 mm max. table load: 1814 kg spindle taper: SK 50 spindle turning speed range: 7500 U/min spindle motor: 22,4 kW feed range: 1270 mm/min rapid traverse: 15,2 m/min tool change unit: 30 Pos. coolant: IKZ voltage: 400 V total power requirement: kW weight of the machine ca.: 13,2 t dimensions of the machine ca.: 4,70 x 2,95 x 2,99 m chip conveyor: - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Mobile, height-adjustable sword folding unit to complement pocket and combination folding machines Low investment for increased versatility in the folding types As a third folding station for user-friendly U-shape By swivelling the sword folding unit by 180 degrees, the International Fourfold is folded for connection to machines with DCT control

Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQs warehouse in Germany from early September 2026. Technical data Manufacturer: Grone ...

Description Max. format: 52 x 36 cm Min. format: 12 x 10 cm Speed: 160 m/min Mobile, height-adjustable sword folding unit to complement pocket and combination folding machines Low investment for increased versatility in the folding types As a third folding station for user-friendly U-shape The international four-fold fold is folded by swivelling the sword folding unit by 180 degrees For connection to machines with MCT control with round plug Connection behind a steel saddle stitcher is possible via an optionally available coupling box

Description Heidelberg Steel Folder Bags Folding Machine TF 56-4-4-F SAK 56 with Cross Fold VFZ 52.2 from 1996 Format 56 x 84cm Flat Pile Feeder with Tremat and PCS 100 Preset Counter 1st Station 4 Pockets 56 cm and Downstream Knife Shaft 2nd Station 4 Pockets 56 cm and Downstream Knife Shaft 1 Mobile Scaling Delivery SAK 56 with Marking Device 1 DV Pump 1 Electromagnetically Working Window Rebate Pocket Analogue Steel VFZ 52.2 Sword Folding Unit from 1996 -Mobile, height-adjustable knife folding unit -As a second or third folding station for user-friendly folding in U-shape -By turning

Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

Mobil Knife Folding Unit Heidelberg VFZ-52.D Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.D Four-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control

Taschen-Falzmaschine 16 Seiten Seitenfalz - Buckle Folder for 16 pages cross Fold Heidelberg Stahlfolder TH82-6-6-VFZ Taschen-Falzmaschine - Buckle Folder Heidelberg Stahlfolder TH82-6-6-VFZ 16 Seiten Seitenfalz - 16 pages cross Fold Walzen 2020 erneuert / Rollers 2020 renewed Year 2013 - Serial-No. FH.FAW0-01500 Rundstapelanleger / Round Pile Feeder RFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 6 buckles - 6 buckles - 1 VFZ 52.D Knife Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SPH-70 Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals

This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details.

General SKU225T278 MakeHandtmann LocationBarneveld TypeVF100B Main Features MaterialStainless steel Volume160 Ltr. Motor5 KW Specified Features - Miscellaneous pump Pumpcheck Capacityupto 420 portions/min With motor5 kW (400 V) Miscellaneous pumps Filling linecheck Dosingcheck Electric capacity5 kW With hopper(160 Ltr.) With switchcheck Floorspace1215x2385 mm Total height1770 mm Specified Features - Miscellaneous pump MaterialStainless steel 1.4301 (304) General No.1571 Year of construction1997 With switchcheck Floorspace1,5 x 1,3 m Total height2,1 m Weight1150 kg Extra SpecificationsParts to make sausages are available at the moment for € 5.500,-. How ever availability is not guaranteed for long period of timeMiscellaneous pumpsOther pharmaceuticsLubricants & oleoDairyOintmentsPaints & coatingsOils & fatHandtmannPumps > Miscellaneous pumpsIndustries > Ph ...

40m³/h, +/-800 mbar, 1.1kW, 450 rpm

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

Directional Control Valve, 5/2 - Directional Control Valve, Electromagnetic SMC VFS2120-5E-01 P: 0.1 - 1.0 MPa 21 - 26 V New ! Dimensions: 130 x 60 x 25 mm

Indicator set PARKER PXV-F141 80342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

Vacuum pump RIETSCHLE VFT 500 (03) Article no.: 102092-0320 500 m3/h 150 mbar motor: 15 kW 380 / 660 V Dimensions: 1520 x 1050 x 1300 mm

High Pressure Centrifugal Pump, Water Pump, Centrifugal Pump KSB Movitec VF2-1 Q = 2.2 m3/h H = 8.2 m Motor: 0.37 KW 240 / 400 V IP55 New ! Dimensions 480 x 260 x 220 mm

SINGLE MULTIHEAD WEIGHER FEEDING - 2XBAGGERS MACHINES ONLY WITH TWIN OUTFEED CONVEYORS - NO GANTRY ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RS-216B-2D-30-SS YEAR: 2011 16 HEAD ILAPAK TWIN BAGGERS YEAR: 2011 MODEL: VEGATRONIC 500 300MM JAW

Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph

Stock number: D977, In stock: Yes, Amount in stock: 1 pc., Item: Variable Frequency Drive (VFD), Construction: Mounted in an electrical cabinet with a main switch, etc., Power: Max 45 kW, Manual DL link: .unisgroup.nl/pdf/EN/Telemecanique-Altivar-5-1.1-to-110-kW-User-Manual .pdf

Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...

Electric windows and mirrors, mirror heating, cruise control, climate control, automatic transmission, 4x4, tow bar Auction-ID: A1-47424-1758

HAAS VF2SS VERTICAL MACHINING CENTER NEW Serial No.: 1166625 Year: 2020 Number of spindle hours: 1,000 hours Table Table dimensions: 914 x 356 mm Table weight: 680 kg Spindle Maximum spindle speed: 15,000RPM option Spindle taper: BT 40 Axes Axis travel: X=762 - Y=406 - Z=508 mm Fast feeds: X=35.6 - Y=35.6 - Z=35.6 m/min Tool magazine Tool changer: 30 tools Maximum tool weight: 5.4 Kg Equipped with 1 HAAS CNC 1 Spindle center coolant system 1 Chip conveyor Auction-ID: A1-50950-22

Attention: motor defective! Electric windows + mirrors, automatic lighting, steering wheel control, cruise control, leather upholstery, multimedia system, heated seats, electrically adjustable seats, skylight, automatically dimming interior mirror, tow bar with 13-pin plug 12v Auction-ID: A1-47424-1762

Technical details Manufacturer: Sabalpack Model: Lion Plus 10T Type: Vertical form-fill-seal (VFFS) packaging machine Year: 2008 Serial number: 08120 Power: 5.5 kW Power supply: 400 V, 50/60 Hz Air pressure: 6–7 bar Configuration: - 10-head combination weigher - Product infeed system - Film unwinding and forming unit - Vertical sealing system - Touchscreen HMI - Electrical control cabinet - Pneumatic system - Discharge conveyor Application: - Automatic weighing and packaging of cookies, biscuits and similar free-flowing food products Construction: - Stainless steel construction - Integrated weighing and packaging system Dimensions: - Length: Approx. 5000 mm - Width: Approx. 2500 mm - Height: Approx. 2800 mm Weight: 3000 kg Condition: Used Observed condition: - Complete packaging system with multihead weigher - HMI and electrical cabinet present - Weighi ...

Freestanding induction cooker from Inventum in black. Four induction cooking zones and a spacious multifunction oven allow you to cook, bake and fry at the same time. • Four induction cooking zones, each with 9 power levels • Boost function on all cooking zones • Touch operation and separate timer for each cooking zone • Automatic pot detection, residual heat indicator and child lock • Oven volume: 65 litres • 11 oven programs • Temperature range: 50–250 °C • Five shelves and oven lighting • Easy-care enamel interior • Triple-glazed oven door • Practical storage drawer • Oven energy efficiency class: A • Dimensions H × W × D: approx. 85 × 60 × 60 cm • Connection according to nameplate: 230/400 V, 50 Hz, 10.1 kW Model variant: VFI6042ZWA/05. The electrical connection must be carried out professionally according to the manufacturer's instructions. Auct ...

Equipped with compressor, which needs to be checked according to the specification. Auction-ID: A1-47367-3

Siemens Acuson X400 – Ultrasound Scanner with Linear Probe VF10-5 Manufacturer: Siemens Model: Acuson X400 With Linear Probe VF10-5 Auction-ID: A1-51618-543

Siemens VFX13-5 – Linear Ultrasound Probe Manufacturer: Siemens Model: VFX13-5 It is compatible with Siemens Sonoline Antares ultrasound systems. Auction-ID: A1-51618-145

Siemens VF13-5SP – Osteoarticular Ultrasound Probe Manufacturer: Siemens Model: VF13-5SP The Siemens VF13-5SP probe is compatible with Siemens Acuson X300 ultrasound systems. Auction-ID: A1-51618-178

Siemens VF7-3 – Linear Ultrasound Probe Manufacturer: Siemens Model: VF7-3 The Siemens VF7-3 linear probe has a frequency range of 3.0 MHz to 7.0 MHz and supports the following applications: abdominal, breast, cerebrovascular, fetal, obstetric, gynecological, musculoskeletal, thyroid, pelvic, and pediatric ultrasound. The Siemens VF7-3 probe is compatible with Siemens Sonoline Antares ultrasound systems. Auction-ID: A1-51618-129