vf 200 used for sale

Power supply voltage: 220 V; installed power: 220 W; mixer motor power: 0.18 Kw; number of hoppers installed: 2; production: 30 Kg/h; hopper capacity: 18 Lt x 2; mixing chamber capacity: 7 Lt.Serial : 950000002663 Estimated weight: 170 kg Approximate dimensions: 1200x800xh1000 mm Auction-ID: A7-46655-43

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-699

Maximum temperature: over 85° C; heating power: 6 - 12 Kw; Pump power: 0.75. Serial: 74 Estimated weight: 130 kg Approximate dimensions: 1200x800xh1800 mm Auction-ID: A7-46655-40

table adjustable 0-45°, including 4 sanding drums Auction-ID: A1-45502-67

Very well maintained DAF CF (2009) with Palfinger crane. Always correctly maintained and technically in good condition. Reliable and immediately deployable crane truck Auction-ID: A3-44484-5690

5-layer feedblock Power: 9.6 kW. Approximate weight: 500 kg Approximate dimensions: 1200x800x1000 mm Auction-ID: A7-46655-50

Power: 2 x Volvo Penta D4-225; total ~450 hp (330 kW); diesel; sterndrive Operating parameters: Engine hours ~300 h; length 9.21 m; beam 3.56 m; class 10 m cabin cruiser Workpiece capacity: Up to 6 berths; cockpit + cabin layout (forward berth + mid cabin) Supported edges: Coastal & leisure navigation Edge types: Recreational cruising; sport navigation Included equipment: Raymarine navigation; GPS + autopilot; bow thruster; electric anchor windlass (remote); hydraulic gangway (pasarela); hardtop extension; cockpit table + convertible sunbed; 2 refrigerators; interior galley w/ gas hob; hot water boiler; shore power 220 V; solar charger; swim platform + ladder Compliance: CE pleasure craft (typ.); EU registration N/C Power supply: Diesel engines + 220 V shore power Year/Manufacturer: 2008 / Cranchi (IT) – Zaffiro 32 Sport cruiser 9.2 m with twin Volvo Penta engin ...

Supply voltage: 220 V, 50-60 Hz; installed power: 500 W; with dedicated PC. Serial: TCC 2001078 Estimated weight: 100 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-46655-195

Pressure: 200 mBar Flow rate: 300 mc/h Approximate weight: 300 kg Approximate dimensions: 1300x800x1200 mm Auction-ID: A7-46655-54

Battery from 2016 With 4 functions up to the fork carriage With new spoons 2 meters long With suspension seat With power steering With good ties With good battery Leak-proof Viewing by appointment Auction-ID: A1-40252-125

Oxilating Auction-ID: A1-45502-72

Management of nr. 56 zones; microcontroller: TH-SYNC; output voltage: 230 V; temperature range: 0-400° C; Thermocouple cables not included, resistor not included. Serial: CC060150 Estimated weight: 90 kg Approximate dimensions: 1200x800xh1400 mm Auction-ID: A7-46655-35

40L/min; Packing 845x695x640mm; 5651 Auction-ID: A1-46415-701

Equipped with nr. 2 material trolleys, loading platform, new spare gasket for the door. Internal compartment volume: 1.5m³; internal measurements: 1000 x 1000 x h 1500mm; internal capacity: 400 Kg; Rated temperature: 250° C; maximum absorbed power: 29 Kw. Serial: 90256 Estimated weight: 1200 kg Approximate dimensions: 1800x1500xh2550 mm 1400x1200xh1000 mm Auction-ID: A7-46655-55

Equipped with a Rovatti F33K100H” 3-stage pump (2024), Iveco” diesel engine, support legs, retractable drawbar. Auction-ID: A1-46064-12

Capacity: 2000 Kg Serial: CE230202 Estimated weight: 5500 kg Approximate dimensions: 3400x1200x2700 mm Auction-ID: A7-46655-5

Complete with additional brush-grinding wheel and polishing wheel Auction-ID: A1-45502-135

Including N°2 current disconnectors: Power: 24 Kw Current: 400 A Power: 24 Kw Current: 630 A.Estimated weight: 850 kg Approximate dimensions: 1300X1100xh2300 (2X) mm Auction-ID: A7-46655-184

Double-hand operation, Drilling capacity 0-20mm Auction-ID: A1-45502-166

165000 km License plate: CA024GP Estimated weight: 2500 kg Approximate dimensions: 3600x1800x1600 mm Item sold ONLY in ITALY. Auction-ID: A7-46655-6

12v connection; 36l/min; 22A; 260W; Auction-ID: A1-46415-704

Equipped with 2x hydraulically foldable haulm toppers, height-adjustable gauge wheels, PTO drive, 2x 1800 mm working width, three-point linkage. Auction-ID: A1-46064-23

12v connection; 36l/min; 22A; 260W; Auction-ID: A1-46415-705

Equipped with a height-adjustable tow eye, hydraulic support leg, slewing ring, tandem chassis, turbine drive, gearbox, irrigation computer Irridoseur”, battery with solar charger, support legs, sprinkler car with adjustable track width. Auction-ID: A1-46064-7

Air flow rate: 1.8 m3/min with pressure 7 bar Refrigerant gas: R 134 Estimated weight: 70 kg Approximate dimensions: 600X600X1000 mm Auction-ID: A7-46655-17

Capacity: 2500 Kg; Lifting height: 3800mm, integral travel: 980mm. Serial: A416A02680C Estimated weight: 5000 kg Approximate dimensions: 3500x1300x2400 mm 600x600x900 mm Auction-ID: A7-46655-3

Hinged Lid Sight Glass Thermometer Auction-ID: A1-46529-3107

Telescopic boom forklift with maximum capacity: 3000kg, maximum lifting height: 41000mm. Serial: 1175493 Estimated weight: 5000 kg Approximate dimensions: 2800(without forks)x1300x2350 mm Auction-ID: A7-46655-2

with Netmak ST 4 feeder. including pallet with accessories Auction-ID: A1-45502-86

welding current range: 200A-35%, including welding cables Auction-ID: A1-45502-68

CYBELEC V-DNC-1200/B DNC 1200 Ps/B, working lengh - 4100mm, pressing force - 150 ton, max. stroke - 415mm, max. closing speed - 200mm/s, pressing speed - 1-10mm/s, Auction-ID: A7-46486-4

Control: Heidenhain iTNC 530 Speed: 10,000 rpm Travel in X/Y/Z: 1,050/540/720 mm Spindle: Technology: Belt spindle Speed: 10,000 rpm Power: 12 kW Tool holder: SK40 Work table: Clamping area: 1,120 x 610 mm Table load (max.): 1,000 kg General: Tool magazine: 30 stations Rapid traverse in X/Y/Z: 36/36/30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ pump with filter and high pressure Setup operation: Electronic handwheel Other accessories: Div. gebr. Tool holder and 3 pcs machine vices (1x 125/2x 160), rinsing gun Auction-ID: A7-46660-102

Spindle diameter: 580 mm Tailstock stroke: 570 mm Turret stroke: 150 mm Machine not working, FANUC power unit NEEDS REPLACEMENT Sale intended only for revampists or scrap dealers Auction-ID: A7-46538-32

Management of nr. 2 zones; microcontroller: 1500W Incatronic AL 1; output voltage: 230 V; Temperature range: 0°-400° C.Estimated weight: 7 kg Approximate dimensions: 300x200xh200 mm Auction-ID: A7-46655-36

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453 Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-46655-25

Auction-ID: A1-45502-223

Equipped with 540/540e/1000 rpm PTO, front weights, hitch linkage, Fender controls, air brake connection, K80 lower drawbar hitch, airco, Auction-ID: A1-46064-6

Consisting of a trailed machine, equipped with 3x 1500 mm sieve beds, rubber-coated cross bar conveyor (500 mm), axle steering, hydraulically width-adjustable discharge conveyors. Note: control box not present, Currently not operational Auction-ID: A1-46064-36

brand: Bi-Matic ; type: Challenge 4.2; year: 2006; serial number: 4905; panel thickness: 40mm; edge tape thickness: 2 mm; Min. workpiece length: 70 mm; throughput: 7 m/min; connection: 400 V; Handbook available: yes; machine weight: 700 kg; size L: 3000 mm; size W: 825 mm; dimensions H: 2300 mm; description: equipped with digital control panel ; 2 x milling unit Auction-ID: A1-45502-2

Equipped with 540e/1000 rpm PTO, stub axles, wheel weights, hitch linkage, fender controls, K80 lower drawbar hitch, LED work lights, air brake connection, air conditioning Auction-ID: A1-46064-4

Diameter of the plate: 1650mm , useful height of the column: 2200mm various programs available Serial: KN/051386 Estimated weight: 500 kg Approximate dimensions: 3500x1700x600h mm Auction-ID: A7-46655-95

Equipped with three-point linkage, PTO, hydraulic tilting and side-shift. Auction-ID: A1-46064-27

Trailer with the following features - Curtainsiders - Sunroof - Hardwood floor - SMB axles with disc brakes French registration Auction-ID: A1-40252-25

GOOD CONDITION OF THE TRUCK, THE VEHICLE iS IN WORKING ORDER, START AND DRIVE WELL, ALL PAPERS AVAILABLE , HYDRAULIC SIDE SUPPORTS ARE FUNCTIONAL, PLATFORM LIFT REQUIRES SERVICE, ERROR MESSAGE ON CAGE, NEW PRICE OF THE FIRE TRUCK WAS 523.000 € ALL NECESSARY DOCUMENTATION IS PRESENT + ORIGINAL PURCHASE INVOICE ALSO AVAILABLE POSSIBILITY TO VIEW VEHICLE BY APPOINTMENT Auction-ID: A7-40553-17

Equipped with Newall digital readout type B 60, quick-change tool holder + 4 adapters, four-jaw chuck 200 mm, change wheels, two fixed and two pedestrian glasses, various turning tools, centers, Wooden storage cabinet. Auction-ID: A1-45502-161

Shrink wrapper - production 300pcs/h; Film light: 600mm; Film diameter: 250mm; Serial: 127 Estimated weight: 100 kg Approximate dimensions: 1300x850x1200 mm Auction-ID: A7-46655-91

Silenced screw compressor Power: 30 HP Pressure: 10 bar. Serial: 31006173 Estimated weight: 60 kg Approximate dimensions: 1300x900x1300 mm Auction-ID: A7-46655-10

Equipped with 540e/1000 rpm PTO, stub axles, wheel weights, hitch linkage, fender controls, K80 lower drawbar hitch, LED work lights, air brake connection, air conditioning Auction-ID: A1-46064-5

Capacity: 2500 Kg; Lifting height: 4050mm Serial: F14024U00100 Estimated weight: 5500 kg Approximate dimensions: 3400x1250x2900 mm Auction-ID: A7-46655-4

HERMLE C 1200 V – Vertical Machining Centre General data: Width: 3970 mm Depth: 4629 mm Height: 3050 mm Machine weight: 12700 kg Main drive: Number of spindles: 1 Spindle speed range: up to 16000 rpm Spindle motor power: 10 kW Tool taper: SK 40 Number of axes: 3 Movement: X-axis travel: 1200 mm Y-axis travel: 900 mm Z-axis travel: 500 mm Table: Table length: 1400 mm Table width: 900 mm Description: This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It is equipped with a robust clamping table (1400 x 900 mm) and a high-performance milling spindle delivering up to 10 kW power, torque up to 87 Nm, and speeds up to 16000 rpm. The machine is suitable for precise and complex machining operations and offers high reliability and durability. Additional information: The tool magazine can be dismantled, allowing the machine width to ...