vf 200 used for sale

Type: Station wagon (Kombi) Year of production: 2007 Mileage: 229,000 km Engine capacity: 1390 cm³ Power: 80 HP Fuel type: Petrol Transmission: Manual Number of doors: 5 Number of seats: 5 Color: Black VIN: TMBJX46Y484015965 Auction-ID: A7-46319-18

218.5KW, 2ø400mm on 1 down pipe, 21.000 m3/hour, screw conveyor, rotary valve, transport fan, return air, compressed air purification Auction-ID: A1-41994-31

Equipped with electronic control, cutting device, double-sided Auction-ID: A1-40136-188

230120mm, ø40125-200mm, Auction-ID: A1-41994-37

Equipped with recent inspection (valid until April 2026); reach with 80kg; 9.5m; 4x4 diesel; 4-cylinder Kubota engine 25kW; swivel cage; working well. Auction-ID: A1-40136-94

Type: Small car Year of production: 2004 Mileage: 96,700 km Engine capacity: 1149 cm³ Power: 75 HP Fuel type: Petrol Transmission: Manual Number of doors: 5 Number of seats: 5 Color: Gray VIN: VF1BB2U0531601950 Auction-ID: A7-46319-5

Equipped with panoramic roof; seat heating; seat cooling; automatic lighting; climate control; AMG courtesy lights; headrest screens with DVD function; electric tailgate; dimming interior and exterior mirrors; electrically folding mirrors; detachable tow bar; memory; keyless entry; Harman/Kardon Soundsystem; rain sensors; parking sensors; spray installation headlights; Major maintenance at 288900 (invoice negotiable) Full maintenance history available Auction-ID: A1-42015-193

Type: Scooter Year of production: 2006 Mileage: 14,000 km Engine capacity: 125 cm³ Engine type: 4-stroke petrol Fuel type: Petrol Transmission: Automatic VIN: LPRSE081000404338 Body color: Gray Auction-ID: A7-46319-20

Please note; machine smokes quite a lot, CW30 Hydraulic switch, 3rd+4th function, work lights, automatic grease lubrication, compressor, self-priming fuel pump, digital display, reversing camera, car idle, heating, air conditioning, radio, heated seats, Auction-ID: A1-40136-80

Technical Specifications X-axis travel: 1800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Fast feed rates X - Y - Z: 50 m/min Spindle speed: 10-10000 rpm; 7.5 - 11 kW Random Tool Magazine: 30 Positions Control: FANUC 21i MB Approximate weight: 7500 Kg Accessories: Chip Conveyor Notes: Bulkhead for pendulum work Item sold in unverified status Auction-ID: A1-44614-18

Equipped with electric windows, radio, etc. Auction-ID: A1-42015-178

Equipped with electric windows, radio, etc. Auction-ID: A1-42015-176

Consisting of 6 components, namely height-adjustable roller conveyor, vacuum input unit, brush cleaning unit, 2-sided adhesive application unit, mist unit, suitable for applying water-based adhesive, roll-out conveyor. Panel size 130x300cm. Includes 2x glue roller and 2x dosing roller in wooden boxes, control box. Please note! Fog unit defected/defective Auction-ID: A1-41994-11

Diesel Vibration plate has been checked and is in good working condition Forward -backward Widening plates Electric start Auction-ID: A1-41964-31

Equipped with radio, electric windows, engine light on. Auction-ID: A1-42015-183

Arnold Fresmak 200 machine vise; hydraulic version; equipped with degree adjustment; jaw width 200 mm; Jaw opening 380 mm. Auction-ID: A1-45170-21

Grundfos - LP 100-200/191 - electric circulation pump 1x Auction-ID: A1-46070-186

SALE ONLY OUTSIDE GERMANY. https://youtu.be/EPCrzSsUe2U Including coating and stacking Retrofit 2016 Ready for use Including stacking and unstacking gantry crane Auction-ID: A1-46310-1

Grundfos - LF 100-200/183 - industrial water pump 1x Auction-ID: A1-46070-349

Without roller belts Portal width 3700, portal length 8800, portal height 3400 Surface Vacuum Cleaner 2010x1100 Hub 2000 Infeed conveyor 3260x12100 Auction-ID: A1-46310-12

26x 33281/Q SKF 40x FRB12/160 SKF 44x PCM15015580F SKF 100x UL36-000426 SKF 67x FR130/10 FAG 30x HJ2318 FAG 3x 3215B. TVH. C3 INA 71x F-110488 INA 57x F-45398 INA 220x F-45914 INA and more Auction-ID: A1-46070-70

Grundfos - LP 100-200/191 - industrial water pump 1x Condition: Used Auction-ID: A1-46070-275

KOMORI LITHRONE S 829 P LX 8 colors with lacquer, reversing device and extended explanation Current meter reading: approx. 120 million prints Year of construction: 2008 Equipped with/equipped with: • Automatic reversing system for pressure passes 8/0, 4/4 • Lacquer group with chamber squeegee system type Bruno & Harris and anilox roll • LithoCoat lacquer circulation system • extended explanation • Baldwin GraphiSet 4 infrared dryer • PQC-S II Print Quality Control, remote control • CIP link • PDC-S II Print Density Control-Spectrophotometric. Colour management linked to the Press • KHS-AI Komori Hyper System-Advanced Interface for fast in-ink and ink removal • AMR Automatic Make Ready. Automatic paper thickness and size adjustment • Full-APC Full-Automatic Plate Changer • cocking register, adjustment of the cylinders, the register lateral, vertical & diagonal  ...

Auction-ID: A1-46315-22

Car Trailer ANSSEMS HKB 2000, official Kennz. HBS-FS 36, EZ not known, ZB I was available at the time of inventory n., permissible. GG 2,000 kg, FIN XLJ00000020002156, platform approx. 300x180 cm, railing all around, vehicle registration document is missing, vehicle registration document is available in the original, HU 04/27, HU report is missing

Intensive batch mixer with a usable filling per batch of 750 l. / 1,200 kg (max.), emptying via central bottom flap (hydraulically operated), tools: pin whirler and wall-to-floor scraper. Agitator drive: 45.0 kW via toothed belt, drum drive: 11.0 kW via sprocket, hydraulic unit: 2.2 kW for lock actuation. All parts in contact with the product are made of stainless steel, only 2,417 operating hours.

Solid wood dining table approx. 200x105 cm, with metal sled base, powder-coated, without the chairs

\" WINI Desk / Work Table \"Form 2000\" – 160 x 80 cm – with permanently installed undermount cabinet Equipment: • Sturdy steel frame • Permanently mounted undermount cabinet with several drawers Condition: Used, with signs of wear and tear due to age and use (slight scratches, discoloration). Scope of delivery: • Desk incl. permanently installed undermount cabinet • Sale without pictured contents / tools / decoration • Dimensions: approx. 160 x 80 x 72.5 cm • Manufacturer: WINI Office Furniture • Model: Form 2000 • Colour: light grey table top, grey frame, beige undermount cabinet \" Auction-ID: A7-46417-306

Tool presetting and measuring device from Zoller, smarTcheck series, with PC and monitor unit. Equipment / scope): Tool presetter with measuring optics Machine base / base cabinet Monitor stand with 2 monitors, keyboard and mouse Integrated industrial PC Lighting and camera unit Documentation and documents Condition: Used. Visually well-groomed overall impression with usual signs of wear due to age and use. Machine was last in use. Software starts (see screenshot). Scope of delivery: Zoller smarTcheck complete PC unit in the base cabinet 2 monitors, keyboard, mouse Documents / printouts Manufacturer: E. Zoller GmbH & Co. KG Machine: Zoller smarTcheck Type: V400S-00083 Serial No.: 876-0608/0 Year of manufacture: 2006 Power supply: 230 V / 50–60 Hz Power: < 1 kVA Pneumatics: 4–6 bar Software: Zoller (Version 3.14.013, according to the display) PC: Zoller-IPC (Pentium 4, 2.4 G ...

\" Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine type: Multi-sensor coordinate measuring machine (optical / tactile) • Year of manufacture: 2006 • Serial number: 06-00376 Condition • Used, well-maintained overall condition • Machine was in measurement operation until the end • Regular calibrations documented • No obvious damage to granite, guides or measuring system Accessories / Scope of Delivery • Granite machine with measuring glass and cover • CNC control with scope controller • Renishaw pushbutton (several probe inserts available) • PC workstation with: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and test protocols • Folder with machine and measuring room documentation • Software and calibration data carrier (CD/D ...

Manufacturer: DENIOS Type: Base K-Pallet DENIOS Drip Pan / Drip Pallet with Grating – 60 L Description: Stable drip pan of the brand DENIOS Type Base K-Pallet made of steel with galvanized grating. The tank is used for the safe storage of containers with water-polluting substances such as oil, cooling lubricants or chemicals. Escaping liquids are collected in the integrated drip pan. Design according to Stawa-R guideline with TÜV test and ATEX marking II2G. Suitable for industrial applications in workshop, production or warehouse. Manufacturer: DENIOS Type: Base K-Pallet Material: Steel (material 1.0038) Collection volume: 60 litres Load capacity: 240 kg evenly distributed Dimensions (L × W × H): approx. 78 × 64 × 28 cm Design: with grating Standard: Stawa-R / TÜV tested ATEX: II2G Year of construction: 2005 Condition: used Auction-ID: A7-46417-404

6-cylinder Perkins common rail engine with 6.6 L displacement (plus PTO and transport boat Air conditioning Air brake system (1 and 2 lines, pneumatic cab suspension ) 3 mechanical control units 4- Spigot speeds (switchable from the cab) Rear Tire Maximo 70% Front tyres Maximo 40% Göppel front hydraulics with 2 additional hydraulic couplings Retrofitted ISOBUS wiring harness Automatic pull jaw with 38 bolts Auction-ID: 04D-FJ1-3

The distance between the needles: 10 mm; Auction-ID: A7-45992-113

Hydraulic-mechanical 4 wheel cold milling machine for asphalt and concrete, milling drum between the rear wheels, milling width can be reduced by dismantling half shells of 250 mm each, hydromechanical drive, hydraulic steering (front axle as steering axle, front axle as steering axle, front axle as steering axle, hydraulic steering machine) Auction-ID: 04B-721-4

\" Machine vice in solid cast design. • Jaw width: approx. 200 mm Product: Machine vise Manufacturer: unknown Type / Design: Machine vise, manual \" Auction-ID: A7-46417-172

Test pin set (test measurement set) according to DIN 2269 for fine tuning and checking measuring equipment or for comparative measurement. The set is 7 pieces and covers the range 23.09 to 23.15 mm. Delivered in the original wooden box. Condition: Very good optical condition. Test pins clean, without any noticeable damage. Wooden box with slight signs of wear. Scope of delivery:     •    7 test pins according to the above list     •    Original wooden box     •    Standard: DIN 2269     •    Design: Test pins / gauge block-like test specimens     •    Quantity: 7 pieces     •     Nominal dimensions: 23.09 / 23.10 / 23.11 / 23.12 / 23.13 /  ...

\" Heavy workbench 2000 x 700 mm with 6 drawers and cabinet and Sandvik Coromant Capto C6 clamping block / pick-up block type: 391.530-C6 Use: For securely holding and fixing Coromant Capto C6 tool holders (e.g. for presetting, storage or workbench mounting). Stable industrial workbench with solid wooden worktop. Design: • 1-door base cabinet left • 6 drawers right (3 + 3) • Sheet steel body • Solid wood worktop Dimensions: 2000 x 700 x 860 mm Condition: Used with clear signs of use. Worktop with pressure marks, scratches and wear on the edges. drawers functional. Without content and without keys. Overall dimensions: approx. 2000 x 700 x 860 mm (L x D x H) Type: Steel substructure with wooden top Colour: Body light grey / Front turquoise \" Auction-ID: A7-46417-376

\" Adjustment / length measurement set – steel – 200–400 mm – in a wooden case Adjustment / length measures made of steel, stored in a sturdy wooden box. • Type: Adjustment dimensions / length dimensions / parallel dimensions • Material: steel • Quantity: 4 pieces • Lengths: • 200 mm • 250 mm • 300 mm • 400 mm • Holes: available (easy handling)\" Auction-ID: A7-46417-156

\" Column-mounted slewing crane Taucha CSX-D 250-5/3.2 with two electric chain hoists Demag (250 kg / 70 kg) Manufacturer: Mechanik Taucha Fördertechnik GmbH Column-mounted slewing crane from Mechanik Taucha Fördertechnik GmbH for use at assembly and machining workstations, most recently used to feed a CNC processing machine. The crane has two booms of the same length, each equipped with a Demag electric chain hoist. This means that two different load ranges can be operated at one workstation. • Main boom with Demag electric chain hoist 250 kg • Second boom with Demag electric chain hoist 70 kg The trolley travel on both booms is manual, as is the swivel movement over the column. The hoists are operated via pendant button control. Condition: used, functional. A crane inspection book in accordance with DGUV is available. Scope of delivery: • Column slewing crane with base plate ...

\" Outer micrometer / U-screw gauge Manufacturer: Mitutoyo Measuring range: 200–225 mm Resolution: 0.01 mm Version: analog Measuring surfaces: Flat measuring surfaces (standard) For sale is a Mitutoyo outer micrometer screw for the measuring range 200–225 mm. The measuring device is located in the original plastic case and is supplied including the adjustment size. The scale and drum are easy to read, and the spindle runs cleanly. Condition: Used, visually good condition with slight signs of wear. Scope of delivery: • Mitutoyo outer micrometer 200–225 mm • Adjustment dimension • Original plastic case \" Auction-ID: A7-46417-128

Column-mounted slewing crane 2,500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: ZSD 2500-6/4,5 Year of construction: 2006 Factory no.: 049/06 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 2,500 kg. The system is equipped with an electric chain hoist from the Demag brand. The stroke is carried out electrically via a Demag electric chain hoist type DKUN 16-1250 with two speeds (fine stroke / fast stroke). The chain hoist moves back and forth electrically on the boom (trolley ride). The swinging movement of the boom is electric. Operation via pendant switch control with emergency stop. System consisting of column, boom, swivel drive and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m Electric chain hoist Demag electric trolley travel Electric slewing mechanism Pendant switch control A test book for t ...

\" Drip pan / PolyCompact pallet from the manufacturer DENIOS for the safe storage of drums with water-polluting liquids. • Manufacturer: DENIOS • Type: PCP 2.2 • Year of construction: 2006 • Material: PE-LLD (polyethylene) • Collection volume: 220 litres • Load capacity: 600 kg (with evenly distributed load) • Design: Pallet for 2 × 200 litre drums • General building authority approval: Z-40.22-303 Dimensions (approx.): • 128 × 85 × 30 cm (L × W × H) \" Auction-ID: A7-46417-142

Roughness Gauge / Surface Gauge Manufacturer: Hommelwerke (Hommel-Etamic / Jenoptik) Type / Model: T 2000 Machine Type: Roughness Gauge / Surface Gauge Condition: used, decommissioned, unchecked / defective Year of manufacture: not known Serial number: 506680 Country of manufacture: Germany Equipment / scope of delivery • Roughness gauge Hommelwerke T 2000 • Measuring column LV-50 • Stylus TKL 300/17 • Stylus with magnetic adapter TKU • Control unit MSC-1 • Machine table with integrated granite measuring plate • PC unit with monitor • Connection cable and visible accessories Condition / Notes • The system has been shut down. • A functional test has not been carried out, the overall technical condition is unknown. • The evaluation unit has a display, but it remains black, there is no display. → It can therefore be assumed that the display unit is defective. •  ...

Article: Guillotine shears / sheet metal shears (manual) Manufacturer: Metallkraft Type / Model: BSS 1020 Equipment / Execution:     •    Solid industrial guillotine shears     •    Hand lever drive     •    Back gauge with scale     •    Hold-down device     •    Stable base (standing machine)     •    Table with scale Condition: Used.     •    Working width / cutting length: 1,020 mm     •    Max. sheet thickness: 1.5 mm (steel)     •    Year of construction: 2008     •     ...

\" Pillar slewing crane 500 kg with electric chain LIFTKET – radius 4,000 mm • Manufacturer Mechanik Taucha Fördertechnik GmbH • Type / model GSX 500-3.5/3.25 Pillar slewing crane make Mechanik Taucha, year of construction 2001.Equipment : • Load capacity 500 kg • Radius 4,000 mm • Electric chain make LIFTKET • Electric drive (electric feed of the trolley) • Two-stage hoist with fine stroke • Suspension switch • Column mounting • Nameplate available Dimensions: • H1 (total height): 3,500 mm • H2 (hook height): 2,750 mm • A (radius): 4,000 mm Condition: Used, dismantled during operation. Usual age-related signs of wear. Lifting capacity: 500 kg Year: 2001 Type: GSX 500-3.5/3.25 Hoist: electric, 2-stage with fine lift Chassis: electrically movable Swivel range: column-guided Manufacturer's hoist: LIFTKET\" Auction-ID: A7-46417-372

-Flexible CNC plate machining center -The machine consists of two processing units (top, bottom) -Equipped with a total of 82 individually retrievable tools -The skipper is able to process two workpieces at the same time from above and below -Dimensions according to data sheet -Work and pressure table -Side work tables -Stop system -Electronic control of workpiece thickness -Digital drives -Central lubrication -Control -Automatic discharge with belt -Air cushion table -Bottom processing unit-Left slot -Upper processing unit-Left slot -Bottom processing unit-Right slot -Upper processing unit-Right slot -Horizontal glue dowel insertion unit for dowels with 8 mm diameter -Surveying system - NC-HOPS programming system -Version with left-hand automatic feed feed -Horizontal drilling and milling Auction-ID: A7-46409-13

2 Bosch condensing boilers 2000 W GC2300W Balcony box - stock 2 pieces Auction-ID: A7-46421-102

200-liter steel barrel from the manufacturer ADDINOL. The contents correspond to the keg marking: Product: ADDINOL XG 68 (according to the original label) Fill level: approx. 80 % Barrel type: 1A1/X/250/21 – UN-approved steel keg Auction-ID: A7-46417-3

3 Bosch condensing boilers 2000 W GC2300W Balcony box - stock of 3 pieces Auction-ID: A7-46421-101

Column-mounted slewing crane 800 kg with two electric chain hoists Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: GSX-D 800-5+70-5/3,2 Year of construction: 2002 Factory no.: 2000327 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 800 kg on the main boom. The system is equipped with two electric Demag chain hoists. The main lift is carried out by a Demag electric chain hoist with a payload of 800 kg. In addition, a second electric chain hoist with a load capacity of 70 kg is mounted for smaller components. The chain hoists move back and forth electrically on the respective outriggers (trolley ride). The crane is moved manually. Operation via pendant button control. Power supply via trailing cable system with mains connection switch. A test book for the crane system is available. System consisting of a column, two outriggers and two electric chain h ...