129,505 used machines on RESALE, but how to find them? Machine Search
Clamping device with 3-jaw chuck, three-jaw chuck WMW three-jaw chuck: DH - A - 200 x 3 TGL 30-2332 outer Ø: 200 mm bore Ø: 54 mm height with jaws: 105 mm base plate: Ø 310 x 21 mm Loochkreis base plate: Ø 260 mm bolt base plate: Ø 36 mm used, tested ! Dimensions: 310 x 310 x 131 mm
Serial number: 28082 Load capacity: 1000 kg Auction-ID: A7-46287-141
The sprayer is in good and working condition. With the necessary stickers from inspection. Auction-ID: A3-43520-34079
Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm
Tilting table, clamping table PAGUS Clamping surface: 200 x 150 mm Working height at 0° Tipping angle: 110 mm Tipping angle: -30°... 0°...+60° 3 grooves groove width: 16 / 24 mm groove depth: 21 mm used, tested ! Dimensions: 200 x 230 x 110 mm
Guide cylinder with locking cylinder KOBLER HK 22.122.032.6622 stroke: 200 mm rod diameter Ø 12 mm with locking cylinder 60.560.016.0001 Dimensions: 570 x 140 x 115 mm
Start with booster. Please note that this car will not be inspected before sale (applicable to Belgian private buyers). Auction-ID: A3-43369-21642
Mechanically driven 540 rpm. In good working condition. Auction-ID: A3-43520-6040
Pneumatic cylinder REXROTH 5232070400 stroke: 200 mm rod diameter Ø 20 mm New ! Dimensions: 380 x 65 x 65 mm
Dimensions are in transport position Auction-ID: A3-43519-18301
Centrifugal Pump, Heating Pump, Chemical Pump WILO IPN 65/200-2.244 GGG 1258292 / 8607 - 1 16 / 13 bar 120 / 140 °C motor: 2.2 kW 220 / 380 V Dimensions: 540 x 480 x 340 mm
HSK recording; with accessories Auction-ID: A1-43429-91
Centrifugal Pump, Water Pump KSB ETABLOC - GN 125-200/754 GN7 Q: 0 - 267 m3/h H: 12,000 4 - 8.5 m motor: QUPA 132M4B 7.5 KW 1450 rpm,in 380 / 660 / 420 V 3AC 50 Hz IP54 Input: Tube inner diameter: Ø 150 mm flange diameter: Ø 215 / 1285 mm, bolt circle diameter: Ø 240 mm 4x bore: Ø 21,000 5 mm Output: Pipe inner diameter: Ø 125 mm Flange diameter: Ø 190 / 250 mm, bolt circle diameter: Ø 210 mm 4x Bore: Ø 17.5 mm New ! with underlays ! Dimensions 750 x 450 x 540 mm
Submersible pump, coolant pump BRINKMANN TB 250/200-09 immersion depth: 210 mm Pump foot Ø: 140 mm Pump flange Ø: 190 mm Q = 280 l/min motor: 0.0.00 63 KW 220 / 380 V Dimension: 430 x 260 x 190 mm
Dry Runner Pump, Water Pump, Centrifugal Pump GRUNDFOS TP 150-200/4 A-F-A-BAQE Q: 235 m3/h H: 16.4 m 16 bar motor: 15 kW 380 / 690 V suitable frequency inverter Art. No. EL193 Dimensions: 1100 x 850 x 550 mm
Electric Cylinder WARNER D12 - 20A8 - 04 4594 ( D12-20A8-04 4594 ) stroke: 100 mm 2000 N 12 V Gs IP65 New ! Dimensions: 300 x 160 x 85 mm
Centrifugal pump without motor, chemical standard pumps with shaft sealing, water pump DICKOW PUMPEN NCLs65/200 year 1992 Q: 30 m3/h H: 12 m n: 1450 rpm impeller diameter: Ø 200 mm Shaft diameter: Ø 32 mm New ! Dimensions: 600 x 360 x 460 mm
Vibrators, external vibrators, unbalance motor CASE (LOT, LOSENHAUSEN) VS 200 K ( VS200K ) VIBROMAX 2.0 kW 900 rpm 220 / 380 V used ! Dimensions: 550 x 350 x 290 mm
Without the exhaust pipes Auction-ID: A1-43429-47
Pressure gauge set MANOMETERWERK KARL-MARX-STADT Pressure gauge set 60 0 - 20 MPa (0 - 200 bar) TGL 8701 Housing diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions (single pressure gauge): 60 x 60 x 65 mm
Sound insulation 1650 x 755 x 200 mm weight: 30 kg Image similar!
Industrial edge banding machine in good condition and functioning. Auction-ID: A3-43519-34052
MTM 3500KG - 2 renewed axles (!) - including ramps Auction-ID: A3-43369-16508
Sound insulation 1650 x 1255 x 200 mm weight: 50 kg picture similar!
Roller shutter PAGUS 1500 x 2000 mm Alu !' drive SEW SF47 DT80K4/BMG/1S 0.55 kW 83 rpm 220 / 380 V used, tested !' Dimensions: approx. 1860 x 520 x 190 mm
Gas sampler, gas detector BERNT GmbH GP-2000 nominal flow: 0.5 l/min Dimensions: 305 x 250 x 140 mm
Refurbished work tools; spring-loaded suspension; Auction-ID: A1-46030-21
Assembly station with roller block MKF R 3026 Payload: 2000 kg Roller blocks only screwed on, sockets and pneumatic connection not checked Dimensions: 1760 x 600 x 1000 mm
Scooter ITOH DENKI Power Moller PMA - 5 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm Dimensions: 360 x 70 x 70 mm
Neat power harrow. Outside surface rust from standing in very neat and little-used condition. Auction-ID: A3-43520-17018
Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm New ! Dimensions: 310 x 70 x 70 mm
Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm Dimensions: 310 x 70 x 70 mm
Jigsaw, high-frequency tool, high-frequency machines FINE ASt 836 0.36 KW 1640 rpm 200 V 300 Hz untested ! Dimensions: 330 x 170 x 70 mm
Front and rear work lights, new battery with automatic filling, flash light Auction-ID: A3-43519-266
maximum number of results exceeded
please refine your search
500 € 
