vf 200 used for sale

\" Scribing and control plate 200 × 200 mm, cast design with feet Scribing or control plate in square design. The plate serves as a flat support and reference surface for testing, marking and control work in toolmaking, quality assurance or in the workshop. Surface finely worked, all around with chamfer. Underside with four cast feet for a stable support. Dimensions: 200 × 200 mm Height: approx. 55 mm Material: cast body with machined surface Design: with feet \" Auction-ID: A7-46417-335

Engine running, but it needs to be checked. Reason for renewal of lifts and BE driver's license needed, which we don't have The ladders are in good condition Auction-ID: A3-43525-2220

Power: Req. tractor power approx. 24 hp; diaphragm pump 55 L/min Operating parameters: Fan Ø 550 mm; air output 24 m/s; gearbox 2 speeds + neutral; vertical spray reach up to 6 m Workpiece capacity: Tank cap. 200 L; orchard & vineyard spraying; 10 nozzles Supported edges: Orchards, vineyards, tree crops Edge types: Air-assisted spraying; phytosanitary treatment Included equipment: Turbine fan Ø 550 mm; diaphragm pump 55 LPM; 10 spray nozzles; 2-speed gearbox + neutral; compact tank frame Compliance: Agricultural sprayer equipment Power supply: Tractor PTO Year/Manufacturer: Mahindra – Airotec 200L 550 Remarks: Lightweight orchard/vineyard sprayer suitable for small tractors and narrow rows Compact 200 L air-assisted sprayer with turbine fan for orchard and vineyard crop protection. Auction-ID: A7-46448-89

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

technical data: Make: AEG Type: AM 200 L4 Connection: 380 V / 57 A kW: 30 kW rpm: 1470

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Hello all We have the following spares for Wartsila 32 LN Cylinder heads 24 pieces used Connecting rods 12 pieces used Fuel pumps 12 used 1 piece new Pistons 12 pieces used 1 piece new Cylinder liners 12 pieces ueed camshaft pieces 12 pieces used injectors 12 pieces used All of them are dismantled from 2007 built Wartsila 32 LN engine with low running hours and are in really good condition We also have in our warehouse brand new consumable spares for Wartsila 32LN such as: exhaust and inlet valves, valve seats, guides, piston ring sets, main bearings, big end bearings , nozzles , cylinder head gasket sets, anti polishing rings and much more Please contact us at: infofin-marine

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm

Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude  ...

Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...

The AutoDoor AD200 is a powerful, electrically operated door opener for CNC machines with a stroke of 2000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD200 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/160/H205 mm -Weight: 12.8 kg

Mixer Falterbaum Typ Famix 20000 Capacity: 20.000 ltr./h year of manufaturing: 1992 with Bran & Lübbe dosing pump incl. switch board The machine is mounted on a stainless steel base plate

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Fan, fan, electric motor blower -Fan electric motor: 2000 W -Speed: 2850 rpm -Voltage: 380 V -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: Ø 160/325 mm -Weight: 17.2 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Motor comes from a Weisser Heilbronn Type 29 CNC lathe -Speed: 2000 rpm -Power: kW -Design: B5 -Shaft diameter: Ø 30 mm -Quantity: 1 piece available -Dimensions: -Weight: 20 kg

Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Perske -Type: 35DW16/6 -Type: DA16/2 -Input: 380 V 50 Hz -Output: 133 V 200 Hz -Power: 35 KVA -Dimensions: 1000/520/H500 mm -Weight: 450 kg

Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 420/180/H160 mm -Weight: 16 kg

Gear motor, electric motor, electric gear motor -Speed: 200 rpm -Power: 0.055 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 44 -Dimensions: 290/150/H135 mm -Weight: 5.3 kg

Gear motor, electric motor, three-phase motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 520/250/H220 mm -Weight: 26 kg/piece

Gear motor electric motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 32 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: tropicalized -Dimensions: 650/320/H300 mm -Weight: 64 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 300-2000 rpm -Motor: adjustable -Number: 1 piece of motors available -Price: per piece -Drive shaft: Ø 16 mm gear -Dimensions: 420/213/H205 mm -Weight: 22 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.47 kW -Speed: 3,000 rpm -with stand -Max. grinding wheels: Ø 200 x 25 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/540/H1100 mm -Weight: 68 kg

Pressure reducers, pressure regulators, manometers -for forming gas -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece

Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products

Fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, coaxial cable, antenna cable -Manufacturer: Bedea, coaxial cable 93 Ohm -Type: M17/90-RG 71 -Length: 200m -Price/delivery: complete -Dimensions roll: Ø 400 x 240 mm -Weight: 14.1 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 2000 mm -Length: 5000 mm -Thickness: 1 mm -Dimensions: Ø 120 x 2000 mm -Weight: 8.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg