vf 200 used for sale

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 17 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x3010x1250 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x2800x1100 mm Weight: 310 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

For plastic scraps, in most cases without need to reduce size The offer includes:, STORAGE HORIZONTAL BELT, to grant non-stop feeding, DIAGONAL LOADING BELT, made in sturdy carbon steel with side walls, dragging paddles, PVC carpet, AGGLOMERATOR with barrel Ø1.500 mm.,, length 4300 mm. width 2300 mm. height 5.050 mm. 560 kw , Hp 730 65% used in work Side opening panel for inspection and replacing blades Operator switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam sucking vent 4 kW UNLOADING HOPPER, complete with 200 mm Ø, diagonal auger for agglomerated material 1,5 kW drive., size 1.150 mm. x 2.000 mm. Lower opening for cleaning purposes Operations, upper lid, two inspection windows (one can be o ...

200 ml bottle form set with shampoo nut

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

2000 Toshiba BTD-200QF CNC Horizontal Boring Mill Spindle Diameter: 4.33" Extended Quill Diameter: 7.87" Taper In Spindle: #50 Vertical Head Travel, Y-Axis: 39.37" Table Cross Travel, X-Axis: 39.37" Spindle Travel, Z-Axis: 15.74" Saddle Travel, W-Axis: 27.55" Table Size, (2) Pallets: 39.37" x 39.37" Table Capacity: 6,000 lbs Table Indexing: 0.001 Degree Rapid Traverse (X,Y,Z Axes): 472.4 IPM Feed Rates: .04-236.2 IPM Table Load Capacity: 6,600 LBS Spindle Speeds (2 Ranges): 20-3000 RPM Floor Space, L x W x H: 173" x 174" X 126" Machine Weight: 39,600 lbs. -EQUIPPED WITH- Tosnuc 888 CNC Controls 40-Station Automatic Tool Changer (2) 39.37" x 39.37" Pallets with Pallet Shuttle System Thru Spindle Coolant Marposs Probing System Chip Conveyor 30 HP Spindle Motor

General SKU409X1293 LocationBarneveld CEcheck Specified Features - Miscellaneous Motor12 volt General MakeKonica Minolta TypeSpectroradiometer CS-2000 Mach.No.D 1003173 Floor space0,88x0,63 m Total height0,90 m Weight60 kg Extra SpecificationsLuminantie range 0.003 till 500.000 cd/m2, contrastmeting 100.000:1 meter, measuring range wave length 380 till 780 nm with resolution off 0.9 nm/pixel.On aluminum frame,&:nbsp:without laptopOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharma ...

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

A used dough weigher W&P Parta U2001 stainless steel is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP PartaU 2001 - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output macx. 1140 Pieces - the dough divider is in baker's condition - Year of construction 2007

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sewing machine (21) Stacker Delivery (Meccanotecnica Plus (1995))

Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right

Manufacturer: ASYS Model: INSIGNUM 2000D Scan Year of Manufacture: 2018 TECHNICAL SPECIFICATIONS Nominal Voltage: 230 / 115 VAC Working Voltage: 24 V DC Frequency: 50 / 60 Hz Full Load Current: 1.5 / 3.0 A Number of Phases: 1 Power: 0.32 kW (320 W) Circuit Breakers: 10 A Pressure: Not applicable Flow: Not applicable DIMENSIONS Length: 1.2 m Width: 0.6 m Height: 1.8 m WEIGHT 200 kg NETWORK CAPABILITY Yes CERTIFICATION CE Marked APPLICATION Industrial automation / scanning system Find more here - .ucymachines/ Contact us at - sales@ucymachines

Banding machine, ATS US 2000 AB, machine no. A65054, in good condition, immediately available

Perfect binder FKS KB-2000; Serial No. 00977708041843, Hot Melt, 1 Clamp, Material Detection Sensors Automatic envelope detection, automatic envelope clamp, spine milling, undercarriage, in good condition, available now Technical data: Maximum format: 320 x 310 mm Back thickness: 60 mm Output: approx. 320 books/hour Weight: 186 kg 230V power supply

Ball transfer table 2000-1007-1000 RA2407 Technical data: Year of manufacture: unknown Condition: good (used) dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000

General SKU368U993 Makehaagen &: Rinau LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2614 Ltr. Motor55 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacitynetto 2000Ltr (bruto 2614Ltr.) Vessel sizesø 1380 mm x 1500 mm Conical bottomcheck Dished top sidecheck With covercheck Manholeø 450 mm Top connectionsDN100, DN25, DN11 OutletDN50 With jacketcheck Max. temperature151°C With paddle stirreragitator with mating blades and with scrapers Counter rotating stirrercheck Motor15kW, 380Volt. Speed mixing shaft6,3-38 rpm With homogeniser500-2540 rpm Motor55kW, 380Volt MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.851 4331 Year of construction1993 Mounted on legscheck Floorspace1,7 x 1,7 m Total height4,5 m Weight ...

General SKU212X067 MakeMinox LocationBarneveld CEcheck TypeMTS 2000/2 Main Features MaterialStainless steel Surface2.5 m2 Sizes diameter1800 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,5m² Number of sieve decks:2 (1,5mm-1,2mm) Sieve sizesDia. 1800 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive excentercheck Motor2,2 kW, 220-240/380-420 volt, 1425 rpm With extra sieve decks3x ( 0,2mm-0,8mm-1,25mm) Tumbler screening machines MaterialStainless steel 1.4301 (304) General No.9518 Year of construction1997 Mounted on mild steel framecheck Floor space2,40x2,40 m Total height1,90 m Weight1200kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.O ...

Holzprofi Maker PS315F-2000 sliding table saw with smooth sliding carriage and large outrigger table, pivoting circular saw blade, and finely adjustable crosscut stop. Space-saving thanks to the easily removable outrigger table. Scoring tool, miter stop, and eccentric clamp included as standard. New: Preparation for grooving cutter. Technical data: Main engine power S1 3,8 kW Voltage 400 V Saw blade tilting 45° Sliding table 2000 x 267mm Cutting length 2300 mm Saw blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Speed saw blade 4500 RPM Speed scoring saw blade 8500 RPM Extraction connection 100 mm Groove cutter thickness (optional) 6-22.5 mm Groove cutter bore (optional) 30 mm Weight 284 kg Optional equipment: with 2600mm format table, Driving device FE-MW-1

Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Height 2700 mm Width 2400 mm Length 3200 mm Capacity 2000 l Electrical Supply: 400V 50Hz 3N Total power 75 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 250 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant Description The wolf-mixer has an infrared MultiTrack analyzer. It analyzes the fat, protein and water content of meat. Approximate accuracy: approx. 2%.

General SKU326X672 MakeMinox LocationBarneveld CEcheck TypeMTS-2000/3 Main Features MaterialStainless steel Surface11.34 m2 Sizes diameter1900 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface11,34 m2 Number of sieve decks:3 Sieve sizesDia. 1900 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive vibro motorcheck Motor0,4 kW, 400/690 volt, 1450 rpm Sieve perforation0,315 mm With ball cleaningcheck With extra sieve decks12x: 2x ball decks, 1x 0,12/1x0,16/2x 0,2/ 2x 0,3/0,315/0,5/0,56/1,0 mm, Tumbler screening machines MaterialStainless steel 1.4301 (304) General No.9975 Year of construction2007 overhauled 2017 Mounted on mild steel framecheck Floor space2,2x2,2 m Total height1,70 mOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemica ...

General SKU295P584 LocationBarneveld MakeGerald Kainz Verfahrenstechnik GmbH (DE) TypeGTS-2000 No.18/027 Main Features MaterialMild steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sieve:Tumbler screening machine: Sieve surface2.6 m2 Number of sieve decks:1 Sieve sizesdia.1880mm With covercheck Inletdia.300mm Outletdia.200mm Drive excentercheck Motor4,0 KW, 400/690 Volt Sieve perforation(no sieve) Tumbler screening machines MaterialMild steel General Year of construction2018 Mounted on mild steel framecheck Floor space2,0x2,0 M Total height1,8 M Weight1150 KG Extra SpecificationsThis sieve is unusedOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent  ...

Subj.: Offer about second-hand cut-to-length line Dear Mr Rajput, We have pleasure to provide you with an offer about second-hand cut-to-length line that is immediately for sale. Qty. 1 Second-hand cut-to-length line Mfc.: SACMA, UWM Built: 1994 Material: Stainless steel Strip Width: max. 2000 mm Thickness: 3.0 – 8.0 mm De-coiler Coil weight: 25,000 kg max. Leveller: 13 rolls, dia.: 130 mm Guillotine: start / stop type, manufactured by SACMA, Paper / cellophane feeder Stacker Run-out table Dimensions: 34 x 8 m Speed: 30 m/min

Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

SUNNEN ML2000, Honing Diameter Range:, - Manual Stroking: 1.5 mm to 165 mm, - Power Stroking: 1.5 mm to 102 mm, Spindle Speed:, - Infinitely variable from 200 to 3,000 RPM, Stroke Rate:, - 60 to 350 strokes per minute, Automatic Sizing Range:, - 3 mm to 51 mm, Oil Tank Capacity:, - 106 liters, Pneumatic Requirements:, - 5.5 bar, Machine Dimensions:, - Length: 1,600 mm, - Width: 1,220 mm, - Height: 1,900 mm, Weight:, - Approximately 725 kg

This MONFORTS RNC 200A lathe was manufactured in 2000. It features a maximum orbital diameter of 300mm and a turning length of 250mm. The main spindle supports a speed range of 50-6000 rpm, with a material passage of 42mm. Equipped with 12 driven stations and rapid traverse rates of 24m/min on the X/Z-axis, this machine ensures efficient and precise turning operations. The MONFORTS RNC 200A machine we have for sale is ready to meet your production needs. Delivery scope does not include a bar feeder. Contact us for more information.

This 600 Lathes Multiturn 2000 was manufactured in 2004. A robust horizontal turning machine featuring a turning diameter above bed of 400 mm, and a length of 1250 mm. It operates at a spindle speed of 2700 rpm with an 8-position turret. Tailstock taper is Morse 5. If you are looking to get high quality turning capabilities consider the 600 Lathes Multiturn 2000 machine we have for sale. Contact us for more information.

This 3-axis KERN CD 480/2000 horizontal turning machine was manufactured in 2010. It features a Heidenhain Manual Plus 620 control, C-axis, driven tools, a 12-fold revolver, and a chip conveyor. With a spindle speed of up to 3000 UpM and a spindle bore of 82 mm, its ideal for precise turning operations. Consider the opportunity to buy this KERN CD 480/2000 horizontal turning machine. Contact us for more information.

This TORNOS DECO 2000/20 was manufactured in 1998. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can handle up to 21 fixed and 15 rotating tools. It includes an IEMCA loader and a conveyor system, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 2000/20 Swiss type turning machine. Contact us for more information about this machine.

This 5-axis DAEWOO PUMA 2000 SY turn-mill centre was manufactured in 2003. It features a max turning diameter of 330 mm, length of 510 mm, and rapid feeds up to 24,000 mm/min. Includes main and sub-spindle capabilities, both with C-axis, and a 12-station turret with live tooling. Consider the opportunity to buy this DAEWOO PUMA 2000 SY turn-mill centre. Contact us for more information about this machine.

This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information.

General SKU344U850 MakeBee International TypeDeBee 2000 LocationBarneveld CEcheck Pressure Working pressure3100 Bar Main Features Capacity60 Ltr./Hr. Motor7.5 KW Pressure3100 Bar Specified Features - Piston homogeniser Piston homogenisercheck Capacity60 Ltr./h (depends on operating pressure, product viscosity and nozzle type) Number of pistons:2 Inlet1:: Outlet¼:: Motor7,5 kW With frequence controllercheck MaterialAlumina, Tungsten carbide, Zirconia, Stainless steel 1.4401 (316), Stainless steel 1.4542 (17-4 PH) General No.2517 Mach.No.2517 Year of construction2002 Floorspace1,5x0,6 m Total height1,3 m Weight450 kgOils & fatGeneric medicinesOintmentsBiotechnologyDetergent & surf.Lubricants & oleoDairyBeveragesPiston homogenisersDebeeIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndus ...

This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information.

Frame Inner Dimension: 1450 x 1650mm Gas Type: Propane Operating pressure: 7 bar

This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information.

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine.

Fabricante DAEWOO Modelo PUMA 2000 SY Año 2003 CNC FANUC 18i – T Capacidades Diámetro máx. sobre bancada 600 mm. Diámetro máx. sobre carro 550 mm. Diámetro máx. torneable 330 mm. Longitud máx. torneable 510 mm. Recorridos y avances Recorrido Eje X 250 mm. Recorrido Eje Z 580 mm. Recorrido Eje Y 100 (±50) mm. Recorrido Eje B 580 mm. Avance Rápido eje X 20 m/min. Avance Rápido eje Z 24 m/min. Avance Rápido Y 7,5 m/min Avance Rápido B 20 m/min. Cabezal Eje C INCLUIDO Indexación eje C 0.001 º Paso de barra 76 mm Nariz A2#6 Velocidad 4.500 rpm. Potencia 15 kW Sub-cabezal Eje C INCLUIDO Indexación eje C 0.001º Paso de barra 45 mm Velocidad 6.000 rpm Potencia 7.5 kW Torreta y Herramientas motorizadas Numero de Posiciones Torreta 12 Dimensiones de la Herramienta 25 mm Tiempo de Indexación Torreta 0.1 s Velocidad Herramienta Motorizada 5 ...

This KUKA KR 240-2 2000 robot arm was manufactured in 2009. It features a robust 6-axis system capable of handling a maximum total load of 640 kg, with an arm length of 1100 mm. Ideal for complex automation tasks, this robot arm can be installed on floors or ceilings, enhancing versatility. A great opportunity to buy this KUKA KR 240-2 2000 robot arm. Contact us for further details regarding this robot arm.

A Fanuc robot that was mounted on an injection molding machine is available. Axes: 6, payload: 3kg, reach: 700mm, repeatability: +/-0.04mm, control system: Fanuc System R-J3, weight: approx. 180kg, operating hours: approx. 80000. Including control cabinet and operator panel. Documentation available. On-site inspection is possible.