vf 200 used for sale

Very good machine with spare parts worth 3000,00â?¬.

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...

We offer a Noe Top 2000 wall formwork in an immediately ready for use condition. The elements are largely galvanized and covered with plastic formwork lining. Price without accessories 99,00€/m² Pcs. Designation 60 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 4 panels 250 x 3310 2 panels 400 x 3310 10 panels 450 x 3310 12 panels 490 x 3310 20 panels 500 x 3310 11 panels 550 x 3310 3 panels 610 x 3310 2 panels 750 x 3310 8 panels 1000 x 3310 8 panels 1250 x 3310 9 panels 1320 x 3310 15 IU 3310 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction ma ...

with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.

2pcs 3500 x 2000 x 350 mm

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

4-way push-mast forklift Manufacturer: BT Model: FRT 2000/4 Built: 1984 Capacity: 2000 kg Triplex mast Lifting height: 5400 mm Battery Voltage: 24V Charger Weight device Side driving possible Fork extension Condition: used, but fully functional

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

Manufacturer: Frenostat 2000 , Model: 32320000, Serial number: 90042,

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

Manufacturer: Frenostat 2000, Type: Bremsgeraät, Model: 32320000, Serial number: 165944,

Manufacturer: Frenostat 2000 , Model: 3232000, Serial number: 111443,

Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm

new ! all stainless steel capacity 200 L. mobile 40 kg quality According to DIN 9797

Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP

Manufacturer: CEFLA, Type: TB 2000, Year: 2015, Control: yes, Working length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Total hight mm: 900, Engine power kW: 0,8, Feeding speed min-max m/min: 20, Required space L x W x H mm: 2000x1300x900, Weight approx. kg: ca. 300, Year :2015

Stop and stirrer Rego SM 2000 M

new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

Manufacturer: Cefla, Type: TR 2000, Year: 2015, incl.control: yes, Length-width mm: 20000x1300, Programming possible: yes, Length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Gottschild, Type: BSD 2000, Year: 2004, Control: Siemens, Monting of the machine: 5 Tellerbürsten, Number of units: 5, Working widht mm: 650, Through running hight max mm: 40, Diameter of brushes: ca.300, Cross-brushing unit: yes, Fast exchange device: yes, Through running hight max mm: 40, kW output motor: ca.1,5, Vacuum belt: yes, Feeding speed continous adjustable: yes, Year :2004

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

Manufacturer: SR, Type: TM 2000, Year: ca.2000, Lifting power kg: 1000, Length mm: 1500, Width mm: 540 Gabel aussen, Lifting hight approx. mm: ca.150, FREE TEXT: Preis 120 Euro.zzgl.Mwst, Year :ca.2000

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996

Key data: 160 KW, 200 kVA, 400 V

MODEL: EQ-D200160 ENGINE: Deutz BF6M1013FC G3 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 200(kVA) / 160(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2600kg DIMENSIONS L/W/HEIGHT (MM): 290012001600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry  ...

New machine 24-month warranty Benefits: + Solid construction + Boiler, central rod and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Flour dust hood closes gently with dampers, with auto shut-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cladding for adjustable feet + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 business days Technical data: - Flour capacity: 10 - 120 kg - Dough capacity: 15 - 200 kg - Boiler volume: approx. 320 litres - Boiler outer edge: 970 mm - Engine power: 13.5 kW (kneading spiral & boiler drive) - rpm at 50Hz (1st / 2nd gear): 98 / 196 - Connection values: 400V - 3Ph - 50Hz - 63A CEE plug - Dimensions in cm: 97 x 156 x 160 (WxDxH) - H ...

New machine 24-month warranty Benefits: + Solid construction, with mobile tank car + Boiler, central rod and spiral made of stainless steel + powerful drive with two motors (spiral & boiler) + hydraulic (vertical) lifting device for the kneading machine + Flour dust hood closes gently with dampers, with auto shut-off + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Tank wagon suitable for lifting tipper mounting (see model "ElevatO") + fast spare parts supply within 1-2 business days Tank wagons: - 1 tank wagon included in the price - additional tank wagons for SpiralO XL 120A: + 4335,-- € net / car Technical data: Flour capacity: 10 - 120 kg Dough capacity: 15 - 200 kg Engine power: 12 kW (spiral) + 1.5 kW (boiler) = 13.5 kW U./min at 50 Hz (1st  ...

Key data: 200 KW, 250 kVA, 400 V

MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

FANUC LR Mate 200i Automation Robot + Controller R-J2+ Handheld The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a wide range of manufacturing and system processes. The LR Mate 200's tabletop design allows it to be used in a wide range of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design wraps all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration when powered on. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end effector connector integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an  ...

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

Technical characteristics: Rated power: 2000 kVA Primary voltage (HV): 20,000 V Secondary voltage (LV): 400 V Adjustment positions: 1: 21,000 V 2: 20,600 V 3: 20,000 V 4: 19,400 V 5: 19,000 V Frequency: 50 Hz Phases: 3Isolation level: HV: 125 kV / AC 10 LV: AC 10 Cooling: KNAN Service Plan: Ongoing Connections: Connection diagram: Dyn11yn11 Output voltage: 400 V – 50 Hz Multiple Connection (Low Voltage): 1W, 1V, 1U / 2W, 2V, 2U Short-circuit current: 5.83 kA Short-circuit impedance: 6.1% Cooling & dielectric: Dielectric Fluid Type: MIDEL 7131 No-load loss rate: 1873.1 W Load Drop Rate: 15.1 kW Location :p aris Condition: Very good condition – Tested and ready-to-use hardware Disassembly and transport possible on request

Key data: 160 KW, 200 kVA, 400 V

MODEL: EQ-VP200160 GENERATOR ENGINE: Volvo Penta TAD732GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 200(kVA) / 160(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1700kg DIMENSIONS L/W/HEIGHT (MM): 252010601530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.

Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Swash-up machine Material : Stainless steel --> 3-deck machine, screening in 4 fractions.