vf 200 used for sale

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM.

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible.

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

General SKU235P244 MakeBuss AG (CH) No.6821 Year of construction1985 Mounted on legscheck Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell110 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2.6 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface2.6 m² Tube capacity20 l. U-typecheck Number of tubes:18x Tube diameter13 mm Tube length3600 mm Max. temperature200°C Shell capacity80 l. Shell diameterø.200 mm Shell length3600 mm Max. temperature200°C Shell connections(3x) 40 mm Cover connections(2x) 40 mm MaterialStainless steel 1.4439 (317LMN) General LocationBarneveld Floorspace4,1 x 0,5 m Total height0,7 m Weight500 kgOils & fatConsumer waste ...

Labellers for folding cartons Manufacturer: Neri Model SL 200 Type 1 TA

Labellers for folding cartons Manufacturer: Neri Model DL 200 Type 2 TA

Key data: 200 t, 4000 mm

Inv. Num. : 9272 Type: LODD 200 Producer: Piesok Generated: Parameters: Compressive force: 200 t Maximum bending length: 4000 mm Machine height: 3800 mm Machine length: 4420 mm Machine width: 2060 mm Machine weight: 22000 kg

Clean air extraction ALKO 200 with FU -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container, frequency converter, pressure transmitter for demand-based control---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,446 Pa, number of bags: 2 pieces, motor: 4 kW, compressed air connection: Max 8.5 bar, dimensions (LxWxH): 2,280x1,010x2,050 mm, weight: 470 kgQuality info: - complete Basic inspection - complete

Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details.

used lifting kneading machine Diosna D 200 A Plus extendable, overhauled, for 200 kg dough per kettle, with 2 new clocks, with 2 stainless steel kettles and kneading arm, Masch.-Nr. 3742-197, 400 V, 50 Hz, 4.7 kW, 10 A, new wheels, repainted, new electrical, new bearings, new V-belts

Duplo DB-200 perfect binder - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Duplo DB-200 perfect binder Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Duplo DB-200 perfect binder Price: 1700 EUR Download PDF Duplo DB-200 perfect binder The device is 100% functional, ready to work. Duplo production. Possibility of gluing books, brochures, blocks, prescriptions, etc. A very handy machine, perfect for a digital printing house. Technical data: Max format: 325 × 380 mm Back thickness: 40 mm Cover weight: 300 gsm capacity approx. 200 books / hour Weight: 120 kg 230V power supply Material dete ...

Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high vo ...

Automatic feed via Elgo control 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 m

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, hopper pump, eccentric spindle pump -Electric motor: Nord 3.0 kW -Transmission: Nord SK25-100LA/4 TF -Speed: 105 rpm -Pipe connection diameter: DN 80 -Quantity: 3 eccentric screw pumps available -Price: per piece -Dimensions: 1810/200/H300 mm -Weight: 107 kg/piece

Table support or sanding length: 200 x 400 mm Sanding belt dimensions: 200 x approx. 1500 mm 2 belt speeds due to pole-switchable motor: 8/16 m/s Drive motor: 380 V, 1.8/2.2 kW Weight: 145 kg Space requirement: 1000 x 750 x 1100 mm

The APV H4-380N 200 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 11 kW - 380-420 V - 50 Hz - 2.930 rpm - 21 A. Diameter of the impellor: 200 mm. Connections on the inlet: DN100. Connections on the outlet: DN65. Estimated capacity: ± 85-100 m3/h at a differntial pressure of ± 4,0 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1384, Diameter of the impellor: 200 mm, Motor: 11 kW - 380-420 V - 50 Hz - 2.930 rpm - 21 A, Current estimated capacity: ±85-100 m3/h at a differential pressure of ±4,0 Bar

In-line homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Output 22 kW, liter output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing

Sanding belt width: 200 mm Sanding belt length: 1800 mm Table support surface: 230 x 600 mm 5 grinding speeds by V-belt step pulley drive electr. Connection: 400 V, 0.55 kW

This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine.

Used Acma rotary trigger filling monoblockTechnical Specifications & Performance Data2003 Acma RC15/6-200 with 15-valve rotary filler (gravity/light depression) and 8-head capping turret for 28 mm plastic screw closures. Rated speed 5000 Bottles/hour. Configured for detergents in glass or PET containers across 500 ml, 650 ml, 750 ml, 1 L formats. This used rotary filling machine provides compact, synchronized filling and capping on a single carousel.Manufacturer: AcmaModel: RC15/6-200Year of manufacture: 2003Machine concept: Rotary filling monoblock with integrated capper and cap sorterCategory: Filling MonoblockSpeed: 5000 Bottles/hourProduct types: DetergentsContainer types: Glass, PETFormats: 500 ml, 650 ml, 750 ml, 1 LFiller: 15 mobile nozzles; gravity/light depressionCapper: 8 heads; cap size 28 mm; neck 28 mm; cap type: plastic screwCompliance: CE markedAdvanced Automation & Contro ...

  - Tandem construction on 1 bed left headstock + right headstock - Mirror double tailstock left and right  - Double carriage  - Steady rest included - Roller rest included - Opperator panel with scales needs attension and replacement  - Motorized tailstock for each side left and right - 3 bed way construction - Torq on chuck 160.000 Nm - Minimum turning diameter Ø 315 mm   - Field off indurstrie: - Ship yard - Propeller shaft - Hydraulic cylinder shaft - Camshaft - Defence & Aeronautica - Rolls and Shaft for steelmills - Crankshaft

plate thickness: 6 mm blade length: 200 mm angle adjustable from - to: fest 90 Grad table surface area: 750 x 500 mm pressure: t total power requirement: 3,0 kW weight of the machine ca.: 0,62 t dimensions: 1,2 x 0,8 x 1,2 m Combination machine: edging and notching - foot switch - Emergency stop switch - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

🔧 GE-Elements 200 x 250 cm †flexible, versatile, and ready for their next job! Looking for a formwork solution that adapts to your project †while staying budget-friendly? Then take a closer look at our GE elements. 😉 Whether used as hand-set or large-area formwork , these elements provide a solid base for a wide range of applications. Thanks to the modular system , even individual or more complex layouts can be handled without overcomplicating things. 💡 The elements feature a robust flat steel frame and are compatible with all PASCHAL systems †perfect if you want to integrate them into your existing setup. 🔁   👉 Please note: These elements are used and show significant signs of wear . They are best suited for medium to low requirements or projects where functionality matters more than appearance.   With the universal con ...

An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling ...

Key data: 5 KW, 400 V

Viessmann Gas CHP Vitobloc 200 EM-5/13 Gas electricity and heat generators from 2013 with unknown operating hours, closed module. 5.5 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 40VS1 C 6/4 Manufacturer: Viessmann Model: Vitobloc 200 EM-5/13 Type: Natural Gas CHP Serial Number: 7459188 3 01862 105 Power [KWel]: 5.5 Power [KWth]: 13.5 Output [KWgas]: 20.2 AC Generator: Leroy Somer LSA 40VS1 C 6/4 Year of Make: 2013 Operating hours: unknown Dimensions LxWxH [m]: 1.50 x 0.80 x 1.30 Weight unit [kg]: 500

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 550 x 430 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 35 mm - Screw length L/D: 17.3D - Dosing stroke: 140 mm - Screw speed: 20 – 480 rpm - Moulding volume: 135 cm³ - Injection pressure: 1,065 bar - Increased injection pressure: 1,620 bar - Heating power: 6.8 kW - Number of heating zones (including nozzle): 4 Clamping unit: - Maximum clamping force: 450 kN - Platen dimensions: 550 x 330 mm - Extended clamping plates: 550 x 430 mm - Minimum mould installation height: 180 mm - Maximum plate spacing: 530 mm - Opening stroke: 350 mm - Control system: EC 100 Drive: - Pump drive power: 11 kW - Approx. weight: 3,300 kg - Dimensions: 3,300 x 1,200 x 1,800 mm Current oper ...

The machine is in good technical condition and can be tested by prior arrangement. Includes a bar feeder, 65mm spindle bore, 12-position turret, and tool probe; everything is fully functional.

Key data: 70 KW, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator, built in 2009, 56,814 operating hours, with silencer. 70 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial number: 700 02 0070 0033 0712 Engine: MAN E0836 E302 Engine power [KW]: 75 Power [KWel]: 70 Power [KWth]: 115 Year of Make: 2009 Hours: 56,814 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.4 x 0.9 x 1.80 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299162/7 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2009 Weight [kg]: 300

Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: Test plate with support ribs -Clamping surface: 300 x 200 mm -Sheet thickness: 10 mm -Plate: with supporting ribs -Transport dimensions: 446/200/H74 mm -Weight: 11 kg

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible.

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible.

A vertical EMAG CNC lathe is available. Workpiece length range: 22mm-100mm, turning length: 100mm, max. swing diameter: 220mm, tool stations: 12, measuring length: 94mm, spindle speed: 6500rpm. Machine dimensions X/Y/Z: approx. 2400mm/3300mm/2950mm, weight: approx. 10000kg. Including tool setting probe, chip conveyor, 120bar high-pressure pump, Heilig workpiece shuttle system with two stations and coolant system. Documentation available. An on-site inspection is possible.

A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible.

x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible.

Key data: 210 mm, 305 mm, 5000 1/min

12-station turret (non-driven) Tool holder MK 3 Chip conveyor Rod Feed Pipe IRCO DS 34.8 (YOC 2013) Dimensions LxWxH: - Machine 4000 x 1700 x 1700 mm - Feed pipe 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Frozen meat grinder Factory overhauled 2024

A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.

Fully automatic strapping machine DSI DBA 200 Made in Germany. The DBA-200 Automatic Frame Strapping Machine is designed to be very durable due to its robust design, the simple operation and handling, its performance and its sophisticated technology particularly suitable for industrial use. Siemens S7-200 controller. Infinitely adjustable strap tension. Built-in tape storage. Energy-saving design, the motor only runs during strapping operations. Reel holder for quick tape change. Robust construction. Initiators instead of microswitches. Automatic tape threading. With foot switch. Belt width from 9 to 12 mm. Belt tension 5.0 to 80.0 kg. Strapping speed up to 26 straps per minute. Frame size 850 x 600 mm. Product size min. 100 mm (w) x 30 mm (h), max. 850 mm (w) x 600 mm (h). Connection voltage 230 V, 1 phase, 50 Hz. Machine dimensions 1,412 x 600 x 1,545 mm. De ...

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Power [PS]: 218; Gross weight [kg]: 1548; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

AC400V-200kW Automatic Load Bank , , Rated Voltage: 3P4W AC400V 50/60 Hz, Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz, Power Supply: 3P5W AC400V 50 Hz , Rated Power: 200 kW at 400V , Duty Cycle: Continuois , Cooling Type: Forced Air Cooling , (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.), , Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW, , Wire Connection: , - Load bank input— busbar (star coupling Y”), - Control power input—terminal block, Communication Interface: RS232/RS485; Gross weight [kg]: 400

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

Semi-automatic pallet wrapping machine manufactured by EAR FLAP, model 200 R27. The equipment incorporates a motorized turntable with a capacity for loads of up to 2,000 kg and a reel carriage with adjustable mechanical brake, and includes a control panel. Technical characteristics Model 200 R27 Year of manufacture 2017 Payload 2,000 L Motor 1 kW 220 V 50 Hz Turntable diameter 1,650 mm Transportation Information Length 2,400 mm Width 1,650 mm Height 2,700 mm No documentation In your state

RIERA NADEU model 200F-1000 centrifuge in 316 stainless steel Technical characteristics Model 200-F1000 Maximum load (density 1.25 kg/dm³) 250 Kg Payload 200 L Maximum speed 1,085 rpm Equipment dimensions Basket diameter 1,000 mm Cake thickness 145 mm Basket height 480 mm No documentation In your state