vf 200 used for sale

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.

Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :1995

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg

Dowel and slotted hole drilling machine HOFFMANN HT 200 very good condition, the machine comes from an educational institution, has been used only a little and is as good as new, it has very few signs of use this allows slotted holes to be milled and dowel holes to be drilled, and the drilling height can be read very precisely on a digital counter with 3 drill bit holders: for drills with M10 external thread and for drills with 12mm and with 16mm shank, plus you get a 2-jaw chuck for drills from 3- 20mm with workpiece auxiliary supports on the left and right, which can be swivelled and have a carrier roller the machine has a landing gear with 2 angle stops on the machine table for left and right The clamping arms can be moved and moved with stake-out device for parapet railings, which is adjustable from 80-160mm and has a digital counter, with pick-up mushroom 380V, 1400 and  ...

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Glass chromatography column BPG., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Top tapping: 2, Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

Used complete steam boiler room from Viessmann. It consists of two steam boilers from Viessmann Vitomax 200-HS type M75A231. Year of manufacture 2015. CE The capacity of each boiler is 5.53 Tons of steam/h. Operating pressure 13 bar. CE

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 1107 kg,

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 1278 kg,

Net weight= 1260 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 1272 kg,

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,

Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips

z-travel: 200 mm Clamping diameter of the cutter heads: max. 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting cone for cutter heads Nominal diameter: 500 mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing devic ...

Description Blumer Atlas 200 Label die-cutter ideal for small labels, banderoles and tax or value coupons from 1992, but very little used with tape feeder SE 18.4 Cross-section device Punching unit ST 18.2 Inline tape machine PB 18.2 and output channel Strip sizes: Length of the tape min. / max. 350 / 1115 mm Width of the tape min. / max. 45 / 215 mm (the smallest dimension is 20 x 44 mm) Label sizes: Pre-cut label size min. 25 x 45 mm Pre-cut label size max. 170 x 215 mm Stack height min. / max. 40 / 120 mm Intermediate bleed 3 – 40 mm Blank 3 �

General SKU049Z226 MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filter:Air Handler Unit: MaterialStainless steel 1.4401 (316) General With switchgear(as is) Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshFluid bed dryers batchPowdered foodsGeneric medicinesStarchBiotechnologyCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarDairySolid pharmaceuticsDy ...

The Stork Westfalia Menger with a capacity of 200 liters is a versatile and robust device, ideal for applications in the food industry. This mixing machine is excellent for efficiently mixing, cooking, and cooling various ingredients. It is used but in good condition and ready for immediate use. The machine was workshop-overhauled about 5 years ago (new long-term storage, new belts, etc.), since then it has run for only about 10 hours as a test mixer. With its reliable construction and high-quality workmanship, the machine ensures smooth operation and a long service life. The 200-liter capacity allows larger quantities to be processed in a single pass, which can significantly increase efficiency in your production process. The Stork Westfalia Menger 200 liter is characterized by ease of use and maintenance friendliness. It is a cost-effective and powerful solution for operations seeking  ...

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

Key data: 70 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator from 2013 with 58,278 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02060 108 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Hours: 58,278 Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299161/1 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200

Spiral mixer extendable Diosna SPV 200 AF/T - Spiral mixer extendable - for max. 200 kg dough bzw. max. 125kg flour - 2 speeds - With digital foil display - Stainless steel spiral - With pliers lock - Boiler is with friction wheel drive - Head hydraulically lifting and lowering

Dimensions (L/W/H): 2570x1100x2490 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26114 Technical data: - Bending process is carried out by hand, supported by counterweight - Clamping of the upper beam via eccentric lever + foot pedal - Max. working width 2040 mm - Max. material thickness St 40 1.00 mm - Bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 70 mm - Max. adjustability bending beam 10 mm - Space requirement approx. W 2800 x H 1200 x D 900 mm - Weight approx. 520 kg - various bending rails as shown

This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.

Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420  ...

M.T.A.A ARIES TECH 2 105 HE, R410a New model year 2025:, 338 kW effective cooling capacity,, water inlet/outlet 20°/15°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, 4 condensers consisting of copper tubes and aluminium fins (NOT micro-channel), Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 338 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...

Description DÖRRIES SDE 200 Vertical Lathe Details Type SDE 200 Machine number K240/50662 Year of manufacture 1977 Face Plate 2,000 mm Circulation 2,200 mm Turning height 2,150 mm Max. table load at reduced speed 20 to incl. documentation

Key data: 200 t

DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...

Ref. №: 4365 Bin washer Type: NIEROS CL-K 200 D For washing: Eurobins – 200 l. Capacity: up to 40 bins/h depending on pollution Power: 28 kW Voltage: 3 x 400 V, 50Hz Machine dimensions in cm: Width: 170,0 Depth: 160,0 (when lid open 290) Height: 190,0

Spiral mixer, Fabr. Diosna, SPV 200 AF/T

Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range  ...

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible.

A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible.

Key data: 2040 mm, 1 mm

used Schechtl hand-held guillotine shears, with hand back gauge, extendable from the front Sheet metal support, automatic. Hold-down Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 2040 mm Blechstärke Stahl/Sheet thickness steel 1,25 mm Sheet thickness Alu 1.75 mm Blechdicke VA/Sheet thickness stainless 0.80 mm Farbe/Colour grün Machine Weight: 650 kg Dimensions/Space requirment 2442 x 756 x 1056 mm Cutting gap adjustment without Automatic hold-down Fixed cutting angle Backgauge min. 5 mm Back gauge max. 500 mm Maschinennummer/Machine number 8604

used spiral mixer Boku SK 200 A extendable, overhauled, 200 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 4,100€ each, stainless steel spiral, newly painted, clocks renewed, 13.3 kW, 29.8 A, 380 V

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

Key data: 160 KW, 400 V

Vissmann Vitobloc 200, Enine MAN E2878 E312, 160KW electric approx. 210KW thermal, approx. 50,000h all maintenance and overhauls carried out. 2 pieces available.

CNC lathe Type: GLS-200 Manufacturer: Goodway Year: 2016 Control: Fanuc Oi - TF Hours: 4851 Max. swing diameter: 500 mm Swivel seat diameter: 310 mm Max. turning diameter: 360 mm Max. turning length: 500 mm Max. load capacity: 85 kg HOWA chuck size: 8 Rod diameter: 65 mm Hole through spindle: 76 mm Spindle bearing diameter: 110 mm Spindle: A2-6 Spindle speed: 45 - 4500 rpm X: 1210 mm Z: 520 mm Turret: 12 positions Tailstock Bar feeder Tool probe Scoop for removing workpiece Machine weight: 3,200 kg Dimensions: 2432 x 1643 x 1727 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader Single screw cont. kneader:Continuous dough preparation line: (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck MaterialStainless steel 1.4301 (304) General LocationBarneveld With switchgear(as is) Floorspace3,0x2,4 M Total height5,6 MPowdered foodsOintmentsTea, herbs & coffeeStarchRubberSpicesFeed additivesDiscountCosmeticsFood additivesSugarLubricants & oleoOther feedConfectioneryDyes & pigmentsKneadersAML StroudIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, her ...