vertical used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.

This 4-axis Finetech SMV 1060 H3L was manufactured in 2024. It features an impressive X-axis travel of 780 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Finetech SMV 1060 H3L vertical machining centre. Contact us for further details.

Hours: 42209 Robot included Machine already ready for transport, to be assessed on viewing day. Complete curtain-sided trailer required for machine transport Auction-ID: A1-48648-1

This 3-axis FAMUP MCP 60 E was manufactured in 2002. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 570 mm. The machine includes a table size of 500 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 60 E vertical machining centre we have for sale. Contact us for further details.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-48648-108

This 3-axis FAMUP MCP70 E was manufactured in 2001. It features an X-axis travel of 700 mm, Y-axis travel of 480 mm, and Z-axis travel of 640 mm. The machine includes a table size of 600 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP70 E vertical machining centre we have for sale. Contact us for further details.

Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQs warehouse in Germany from early September 2026. Technical data Manufacturer: Grone ...

This 3-axis FAMUP MCP 45 E vertical machining centre was manufactured in 2004. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed range of 50 – 10,000 rpm and a maximum table load of 100 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 45 E machine we have for sale. Contact us for further details.

vertical machining center, year 2019, 3500 operating hours, CNC CNC-C00. Used machine. More info & price on IndustrialBuyer.

Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible.

Control OSP 100U Travel X/Y/Z: 560 x 610 x 560 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 60 Wkz., SK 40 Chip conveyor d

Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.

PFAUTER P630 Gear Hobbing Machine. Chip Conveyor Maximum Gear Diameter 630 mm Gear Width 425 mm Maximum Module 10 Table Diameter 550 mm Table Bore 125 mm Maximum Cutter Length 215 mm Minimum Number of Teeth 8 Maximum Workpiece Length 825 mm Distance Milling Spindle - Clamping Surface 50 - 425 degrees Milling Slide Swivel 240 degrees Spindle Speeds 62 - 390 RPM Tangential Adjustment 200 mm Axial Feeds 0.4 - 6.8 mm/rev Radial Feeds 0.1 - 1.7 mm/rev Maximum Cutter Diameter 192 mm Total Power Requirement 20 kW Change Gears Set / Chip Conveyor / Coolant Tank

This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details.

Intermittent, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch Flow Wrapper Machine Type: SVB3601R Year of Make: 2000 Intermittent flow wrapping machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeder Machine type: FVS 3091 SQ Products suitable for dosing: - Granules - Powder - Icing sugar - Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch Checkweigher Machine type: KWE 5000 Year of Make: 2009 The plant was expanded and stored due to product changeover. 6 months before the machine was removed, a lot of investment was made, including new sealing jaws and a new display. We will be happy to send you a video of the runnin ...

This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width transverse: 2mm Seam width longitudinal: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erection and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard derz. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap sealing station Acceptance of the folding cartons and transport to the filling station, fixation under the filling stat ...

This 3-axis Hurco VMX 42i was manufactured in 2014 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information.

DMG DMU 40 eVo ist ein vertikales Bearbeitungszentrum mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Tisch 480x400 mm, 5 T-Nuten (63 mm Abstand, 14H7), Zentrierbohrung 30H6, max. Tischlast 250 kg; Wege X400 Y400 Z375 mm, B -5/+110°, C 360°, Tischdrehzahl 60 t/min. Technische Hauptdaten: Leistung 50 kW, Spindel HSK-A63 bis 24000 min-¹ (stufenlos), Drehmoment 130/86 Nm, Spindelleistung 35/25 kW, Vorschub 0-80000 mm/min, Druckluft 6 bar, 3x400V 50Hz, Abmessungen L2960xB2620xH2530 mm, Gewicht ~7150 kg. Zubehör: FANUC Lade-Roboter, Kühlmittel/IKZ 40/80 bar, TRS2 Werkzeugbruchkontrolle, Laser-Werkzeugvermessung, Späneförderer, Nebelabsaugung, Spülpistole, rotierendes Sichtfenster, Schaltschrank-Klimagerät. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Werkzeugbau. Technische Daten ohne Gewähr

This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details.

DECKEL MAHO - DMU 125 T Stock number 1039-8230 Machining Center - Vertical Control TNC 430 Heidenhain Country of origin Germany Additional information: Machine is delivered with new discs. Technical details: x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Control TNC 430 Heidenhain Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 15 / 10 kW Max. torque 500 Nm Tool holder SK 40 Work table: Table clamping area 1,500 x 1,050 mm Max. table load 2,500 kg Number of T-slots 10 T-slots - width 18 H7 mm T-slots - spacing 100 mm Tool Changer: Number of tool positions 60 pos. max. tool diameter 80 mm max. tool diameter. with free neighboring box. 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg Feeds: Rapid traverse ( X / Y / Z ) 15 m/min Feed speed 10,000 mm/min Total power require ...

This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details.

Thimonier High-Frequency Vertical Form Fill & Seal Machine 30-60 BPM Auction-ID: A1-48805-27

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

machine without tools, vices. measuring probe is included View machine on viewing day for correct assessment, machine ready for pick up Auction-ID: A1-48648-5

This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details.

machine ready for transport and to be assessed on viewing day Not included tooling Auction-ID: A1-48648-133

Key data: 2300 mm, 1400 mm, 1050 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1800 (1600x2500)mm Axis X ... 2300mm Axis Y ... 1400mm Axis Z ... 1050mm Spindle speed ... 10-10000rpm. Controlled axes... 5 IKZ ... 40bar HSK-A100 Max. workpiece weight ... 10000/5000kg Max. spindle torque ... 130/150Nm Axis C ... 360° Axis B ... ±110° Rapid traverse... 50m/min Magazine spaces ... 48 Machine weight ... 32000kg L x W x H ... 6640x6000x4800 mm Accessories: Workpiece probes, tool probes New spindle in 2024

This 3-axis IBARMIA ZV 40 L2200 vertical machining centre was manufactured in 2000. It features an X-axis travel of 2200 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine has a maximum table load capacity of 2300 kg and a rapid traverse rate of 30 m/min. If you are looking to get high-quality machining capabilities, consider the IBARMIA ZV 40 L2200 machine we have for sale. Contact us for further details.

Unused, autoclave, on pallet, transportsize 1250x8501600mm. Auction-ID: A1-49790-1027

For sale is a vertical CNC machining center STAMA MC015 based on FANUC ROBODRILL α-T14iA with FANUC 16i-M control. Equipment: 14-fold tool changer High-speed spindle BT30 / SK30 Tool Holder Coolant system Compact design FANUC CNC Control with additional swivel/dividing head 5-axis machining possible Technical data: Travel distances approx. X500 / Y380 / Z300 mm up to 24,000 rpm Year of construction 2000 Weight approx. 1800 kg

Inv. Num. : 9165 Type: VF-8/40 Producer: HAAS Created: 2016 Parameters: Operating hours: 4500 h Work table length: 1626 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 1626 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 11250 kg

Number of tool positions: 30 Spindle power: 14 kW Spindle speed: 14,000 [rpm] A-axis travel: 360 [°] (+/-) Indexing accuracy: 0.001 [°] Stroke: -10 / +95 [°] Indexing accuracy: 0.001 [°] Tool Changer Type : Loader Arm Table load capacity : 350 [kg] Auction-ID: A7-32339-12

This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details.

Morey Ø 500 mm Strokelength: 200 mm Table dia: 500 mm Depth of throat : toolholder -- column: 600 mm

This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details.

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details.

Unused, autoclave, on pallet, transportsize 1250x8501600mm. Auction-ID: A1-49818-1027

This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details.

vertical machining center, year 2001, CNC S3045E. Used machine. More info & price on IndustrialBuyer.

This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking to get high-quality machining capabilities, consider the Okuma ACE CENTER MF-46VA vertical machining centre we have for sale. Contact us for further details.

Hermle C800U X: 800 - Y: 600 - Z:500 mm CNC X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table dimensions: 800 x 700 mm Admission in spindle (ISO): SK40 Power on the spindle: 23 kW Control : Heidenhain iTNC 530 Number of axes: 5 axis Toolchanger: yes Number of toolholders: 30 tools Number of rotations: 10 0000 rpm Power principal motor : 31 kVa Weight: 9 ton

This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details.

Hermle C30U X: 650 - Y: 600 - Z: 500 mm CNC X-axis: 650 mm Y-axis: 600 mm Z-axis: 500 mm Table dimensions: Ø 630 mm Admission in spindle (ISO): SK40 Power on the spindle: 26 kW Control : Heidenhain iTNC 530 Number of axes: 5 axis Toolchanger: yes Number of rotations: 18 000 rpm Length: 3500 mm Depth: 2480 mm Height: 2950 mm Weight: 9,5 ton ACCESSORIES: yes

This HARDINGE EMAG VL 5 was manufactured in 2001. It features a Fanuc Series 21i-T control, a chuck diameter of 260 mm, and a maximum turning diameter of 220 mm. The spindle can reach speeds up to 4,500 rpm, and it includes a 12-piece automatic tool changer. Ideal for precise vertical turning operations. Contact us for more information.

Type: UMC-750 5-assige verticale bewerking X-axis: 762 mm Y-axis: 508 mm Z-axis: 508 mm Table dimensions: Ø 630 mm Admission in spindle (ISO): BT40 Power on the spindle: 22,4 kW Control : Haas Number of axes: 5 axis Toolchanger: yes Number of toolholders: 40 positions Number of rotations: 8100 rpm (122 Nm) Weight: 6 ton

This 3-axis ARES-SEIKI R4530 was manufactured in 2006. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 300 mm. The machine includes a work table size of 600 mm x 300 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the ARES-SEIKI R4530 vertical machining centre we have for sale. Contact us for further details.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 14.000 min/-1 power capacity - main spindel: 18,9 / 14 kW max. Torque: 100 Nm tool taper: HSK A-63 NC-Rotary table:: table surface area: 630 x 500 mm max. table load: 300 kg Swivel range: -5 / +110 ° rotation range: 360 ° T-slots: 7x 14 x 63 mm tool magazin:: number of toolpositions: 30 pos. max. tool weight: 6 kg max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. workpiece length: 300 mm feeds:: rapid traverse: 24 m/min Feed force: 4,8 kN feed speeds: 1 - 24.000 mm/min total power requirement: 25 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,3 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: hydraulic system: elektr. hand wheel: exhaust fan: 3D quickSET: test probe: DMG  ...

This 4-axis HANNSA YL 850 B was manufactured in 2016. It features an X-axis travel of 850 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a FANUC 0I-MF CNC, a spindle speed of 10,000 rpm, and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the HANNSA YL 850 B vertical machining centre we have for sale. Contact us for further details.