We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,836 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Inv. Num. : 7397 Type: MCV 800 Q Producer: MAS Created: 2019 Parameters: Control system: HEIDENHAIN Work table length: 1000 mm Work table width: 500 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 550 mm Machine weight: 4000 kg Equipment: Workpiece probe
used
Inv. Num. : 7395 Type: MCV 1270 SPEED Producer: MAS Generated: Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Z-axis travel: 720 mm Machine weight: 11800 kg Equipment: Workpiece touch probe
used
Description: Machine number: 177055919 Control system: SIEMENS SINUMERIK 840 D Chuck diameter: max. 210 mm Turning diameter: 400 mm Workpiece length: 120 mm X-axis travel path: 1130 mm (total travel path) X-axis travel path (working path): 400 mm Z-axis travel path: 280 mm Rapid traverse X-axis: 60000 mm/min Rapid traverse Z-axis: 30000 mm/min Motor spindle: Spindle diameter in the front bearing: 90 mm Spindle speeds: Rotating spindle speed range infinitely variable: max. 6000 rpm Disk turret with holder for driven tools: 8 pieces Shank diameter: 40 mm Spindle speed: max. 4000 rpm Torque: max. 50 Nm Working range with vertical drilling spindles Number of drilling spindles: 3 Spindle speed: max. 5000 rpm Drive power: 16 kW Torque: max. 83 Nm Incl. 8-station tool turret and a power chuck (diameter: approx. 250 mm) from the manufacturer SMW Incl. conveyor station from the manufacturer SCHNA ...
used
Key data: 510 mm, 510 mm, 510 mm
Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder
used
Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute
used
Key data: 1050 mm, 800 mm, 560 mm
Machine Type: CNC Vertical Double Column Machining Center Manufacturer: DECKEL-MAHO (DMG) Model: DMC 105 V linear Year of construction: 2008 Condition: very good Offer Type: Used Machine Specifications: Control: Heidenhain iTNC 530 Speed range: 18000 rpm. Spindle holder: HSK-A63 Table: 1200 x 850 mm Travel range: x = 1050 mm y = 800 mm z = 560 mm Rapid traverse speed: in x/y/z = "90m/min." Tool changer: with 60-fold tool magazine Propulsion: 25/35 kW Remark: Heidenhain touch probe for: automatic workpiece measurement, Automatic tool measurement IKZ with high-pressure pump, Spindle cooling, Conveyor electric handwheel Weight: 12000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Chiron FZ08KW MAG Vertical Machining Center With 4th Axis Siemens 840D Control Unit 15 000 rpm Double table Double dividing head(Peiseler) Renishaw probe All maintenance has been done Chiron Turkey
used
x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...
used
vertical CNC machining center, manufacturer: MAZAK, type: VCN 510 C, year of manufacture: 2005, serial no.: 175960, weight: 7,100 kg, chip conveyor MAYFRAN (dismantled), control system MAZATROL 640 m, speed: 12,000 rpm, tool changer 30-fold, travels x/y/z = 1,050/510/510 mm, adapter SK40, accessories
used
Description: vertical cut max 2500 mm maximum cutting length 3660 mm saw velocity Disco 300 mm 5,5 Kw 2855 rpm incisor velocity Disco 120 mm 0,55 Kw 2820rpm postforming saw group Disco 300 mm 0,75 kw, 2803 rpm motor power 6,25 Kw The machine is equipped with a 3rd motor that cuts and prevents 'tearing' of the material voltage 380 dimension 4800x1700x2670 mm weight 1900 Kg cutting length: 4,200 mm, cutting height: 2,500 mm, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,700 x 2,670 mm, weight approx.: 1,900 kg
used
Quaser MV154APC/F12 CNC Vertical Machining Center Fanuc control unit X : 700 mm Y : 530 mm Z : 560 mm Double Table - size is 800 mm x 500 mm Machine is in good working condition
used
Description: PUTSCH-MENICONI SVP 133 Vertical Panel Saw dimension (l x w x h) approx. (2 packs) 5000 x 1010 x 2200 mm 2620 x 1010 x 480 mm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,010 x 2,200 mm, weight approx.: 1,500 kg
used
Marel vertical buffer, serial number: 1970010, year of construction: 10-01-2011, 400 V, 3 Ph, 50 Hz, 6 A, 410 kg, 6 floors, dimensions: 2000 mm x 1150 mm x 1700 mm. Incomplete.
used
Description: Serial number: ,A4202.00-02991 IMPORTANT NOTE: The balancer that appears on the right of the ,HOFMANN VK 41-MC7 Vertical Balancing Device is not included in the sale. weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,060 x 1,650 x 1,800 mm
used
This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.
used
This EMAG VL3 Vertical Lathe was manufactured in the year 2001. It is equipped with a Fanuc Series 18i-T control unit. The machine was refurbished completely in 2022 to have equivalent condition as new machine. See all details of overhaul in attached PDF.
used
This STANKO 1525 Vertical Lathe was manufactured in the year 1972 in Russia. The machine has a maximum turning diameter of 2500 mm.
used
This DOOSAN MYNX 5400/50 Vertical Machining center was manufactured in the year 2022 in South Korea and has 1452 production hours, of which 211 are cutting hours. It is equipped with a DN Solutions Fanuc i- Series control unit. The machine has a spindle speed of 6000 rpm.
used
This HURCO VMX24S 3-axis Vertical Machining Centre was manufactured in 2003 and is equipped with a 15000 rpm spindle, SK40. It comes with a 24x tool magazine and external water cooling. The control unit is HURCO ULTIMAX.
used
This OKUMA MB-46VAE Vertical Machining Centre was manufactured in 2005. It comes with a OKUMA CNC OSP-E100M control unit and a spindle speed of 8,000 rpm. It has 3 axis (X = 762 mm / Y = 460 mm / Z = 460 mm) and has a workspace of 1000 x 460 mm. The tool holder is BT40 (N laying tools 32).
used
This Okuma MX-45 VAE Vertical Machining centre was manufactured in the year 1996 in Japan. It is equipped with an Okuma OSP700M control unit. It has capacity for 20 tools and disposes of a spindle which has a spindle speed range of 7000 rpm.
used
This EUMACH LBM-1500 vertical machine center was built in the year 2014 in Taiwan. The machine has 3 axis, a maximum working dimensions of 1600 x 1000 mm with a maximum load of 3000 kg. It is equipped with a Heidenhain TNC 640 control unit.
used
This IBARMIA ZV 58/L7000 EXTREME Vertical Machining center was manufactured in the year 2017 and has under 4500 production hours. It is equipped with a HEIDENHAIN TNC 640 HSCI control unit and has 3 axis. The machine has a spindle speed of 16000 rpm and a HSK 63 spindle tool taper. It comes with 60 tool slots as well as a PDF (FR) with technical benefits.
used
This Unisign Unipro 5P Drilling and Vertical Machining center was manufactured in the year 2004 in Netherlands. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle speed of 12000 rpm and a drill pressure of 1300 kN.
used
This HAAS UMC750SS Vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit with Ethernet interface. The machine disposes of a 1 GB of memory for programs, a 15â COLOR LCD monitor, a USB port with memory lock key and a power failure detection module. There are a lot of options fitted on the machine that can be included.
used
This Röders TEC RXP 500 Vertical Machining Center was made in 2005 and a general overhaul was made in June 2012, has 52478 hours, of which 21375 are spindle hours. It is equipped with a Röders RMS6 Ver.3.24 control unit. The machine has a spindle speed of 42000 rpm and is in very good condition.
used
This DMG DMC 1035 V ecoline Vertical Machining center was manufactured in the year 2012 in China. It is equipped with a SIEMENS SLIMline control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. Availability is beginning of May 2024, depending on the arrival of a new machine.
used
This FEELER QM-32 Vertical Machining Centre was manufactured in the year 2003 in Taiwan. It is equipped with a FANUC 18-m control unit. It is included with a Renishaw Tool Measurement System, operation documentation and 5 BT-40 Tool Holders.
used
This Rambaudi RC 270 Vertical Machining center was manufactured in the year 2014. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit and has 5 axis. The spindle speed is at 24000 rpm and runs with a HSK-A63 tool taper. The machine has operated 38428 power on hours and 23655 cutting hours. It stands out for its movable crossbeam which makes the machining centre suitable for high-speed machining with 5 axes. See photo and video gallery for more impressions. Extract of original tech specs (EN) attached as PDF below.
used
This AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center was manufactured in the year 2009 in Switzerland and has 30978 hours, of which 13309 are spindle hours. It is equipped with Heidenhain iTNC 530 control unit and has 3 axis. The machine has a spindle speed of 100 - 10000 rpm, and includes a RENISHAW 3D IR Measuring Probe MP12, Tool measuring probe 3D TS27, and a Set of tool holders as additional equipment, is in very good condition and well maintained.
used
This HERMLE C800U Vertical Machining center was manufactured in the year 1999 and has 25844 production hours. It is equipped with a HEIDENHAIN TNC 430 control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.
used
This MAZAK VTC-200C Vertical Machining center was manufactured in the year 2005 in the United Kingdom. It is equipped with a MAZAK MAZATROL 640M control unit and has 3 axis. The machine has a spindle speed of 12000 rpm and operates with a table size 2000 x 510 mm.
used
This Matec 30HV Vertical Machining Center was manufactured in the year 2018 in Germany and has 21719 production hours. It is equipped with a HEIDENHAIN TNC 640 control unit and has 4 axis (4 axis, swivel head +/- 105° with 1° position indexing). The machine has a 12,000 1/min motor spindle with 30 kW (40% ED), HSK63, a tool magazine with 48 stations and internal cooling with 70 bar (paper belt filter) and external nozzles on headstock as second coolant circuit with 20 bar. It comes with a chip conveyor (discharge left, height 1130 mm), electronic handwheel and RENISHAW measuring probe. See original delivery note as PDF (German) attached to see all standard and extra options.
used
This HURCO VMX60/40T Vertical Machining center was manufactured in the year 2007. It is equipped with a MAX control unit and has 3 axis (X = 1524 mm / Y = 660 mm / Z = 610 mm). The machine has a spindle speed of 10,000 rpm, a BT40 tool taper and a table size of 1670 x 660 mm (outer length). In addition it comes with a Renishaw light beam. Located in Belgium it is still under production and can be inspected on-site anytime. See photo and video gallery for more details.
used
This DOOSAN DNM 400A Vertical Machining center was manufactured in the year 2013 in Korea and has 37790 production hours. It is equipped with a Fanuc control unit and has 3 axis combined with an ISO 40 tool taper. The machine has a spindle speed of 8000 rpm and a spindle motor power of 11 Kw.
used
This Vison Wide VTEC SF-2112 Vertical Machining center was made in 2014 and has 17000 production hours. It is equipped with a Fanuc Series Oi-MD control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
used
This DN Solutions MYNX 6500/50 Vertical Machining center was manufactured in the year 2023 in South Korea. It is equipped with a DN Solutions Fanuc i-Series control unit. The machine has a spindle speed of 6000 rpm.
used
This STYLE MC 1500 Vertical Machining center was manufactured in the year 2020 in the Netherlands and has 2255 production hours. It has 3 axis. The machine has a spindle speed of 10000 rpm. Original machine PDF (EN) is attached, see below.
used
This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained.
used
This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 18,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions!
used
This Emco Emcomill E 1200 Vertical Machining Center was made in 2014 in Germany and has 14677 production hours, of which 3402 are spindle hours. It is equipped with a Siemens Sinumerik 828 D control unit and has 4 axis. The machine has a spindle speed of 12000 rpm, is in very good condition, and is well maintained.
used
This Deckel Maho DMC 103 V Vertical Machining Center was manufactured in the year 1998. It is controlled by a SIEMENS SINUMERIK 810 D control unit. This 3-axis CNC milling machine has a spindle speed of 8000 rpm and a 24-position tool magazine with SK40. It is fully equipped with internal / externl cooling, chip conveyor and an electronic handwheel. With a completely renewed control it works flawlessly.
used
This HARDINGE GX 1000 Vertical Machine Center was built in the year 2006 and has 48360 hours, of which 17920 are cutting hours. It is equipped with a Fanuc Series Oi-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
used
This Deckel Maho DMU 60P hi-dyn Vertical and Horizontal Machining center was manufactured in the year 2001 in Germany and has 33410 production hours. It is equipped with a HEIDENHAIN TNC 426 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.
used
This HARTFORD PRO 1000 (2011) Machining centers (vertical) machine was manufactured in 2011 . It is equipped with a CNC Fanuc control unit and has 5 axis. It is in very good working condition and can be inspected at any time and disposes a set of 50 tools holders.
used
This FIDIA HS 664 Vertical Machining Center was manufactured in the year 2005 in Italy and has 56206 working hours of which 23370 are cutting time. It is equipped with a FIDIA C1 control unit and has 3 axis. The machine has a spindle speed of 24000 rpm, is in good condition and well maintained.
used
This Bridgeport VMC1000-22 Vertical Machining Center was manufactured in the year 2000 and has 12200 production hours. It is equipped with a HEIDENHAIN TNC 426P control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
used
This DMG MORI DMC 1150V Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a HEIDENHAIN TNC 640 control unit and has 3 axis. The machine has a spindle speed of 12000 rpm and operates with SK40.
used
This HAAS VF-3SS Vertical Machining center was manufactured in the year 2017. It is equipped with a HAAS control unit and has 3 axis (X = 1016 mm / Y = 508 mm / Z = 635 mm). The machine has a spindle speed of 15,000 rpm and comes with a Wireless Intuitive Probing System (RENISHAW), Chip & Coolant Management (through spindle coolant, through-tool air blast etc.) and Legacy Options (CT-style tool changer grippers, 24+1 side-mount tool changer etc.). It is still under powert and can be inspected on-site. See video for more details.
used
This Hyundai Wia KF 5600C Vertical Machining center was manufactured in the year 2017 in Korea and has 1800 production hours. It is equipped with a HYUNDAI WIA Fanuc Series 0i control unit. The machine has a spindle speed of 12000 rpm and operates with tool holder BBT40.