137,145 used machines on RESALE, but how to find them? Machine Search
This 5-axis DMG DMU 50 was manufactured in 2018. It features a working table size of Ø 630 x 500 mm and a maximum table load of 300 kg. The machine is equipped with a high-speed spindle capable of 15,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DMU 50 vertical machining centre we have for sale. Contact us for further details.
HAAS VF-0 Vertical Machining Center YOM 1998 Table 660x356 mm X/Y/Z 508/406/508 mm Spindle speed 0-7500rpm Spindle motor 14.9kW Rapid feed rate 18m/min Tool Capacity 20 Max. part weight 340.3 kg Spindle taper BT40 Machine Weight 3175Kg Remark: The machine had worked small parts in the production of hunting and sporting rifles. Mechanically OK, Defective a cirquit board
This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG DMC 100 V hi-dyn was manufactured in 2000. It features a high-speed spindle with a maximum speed of 18,000 rpm and a tool changer with 30 positions. The machine is equipped with a robust control unit from DMG and has a power capacity of up to 15 kW. If you are looking to get high-quality machining capabilities, consider the DMG DMC 100 V hi-dyn vertical machining centre we have for sale. Contact us for further details.
This 5-axis CHIRON FZ 18 S LEAN was manufactured in 2003. It has a weight of 6000 kg and operates at a power rating of 29 kVA. The machine is designed for high-quality vertical machining capabilities. Consider the opportunity to buy this CHIRON FZ 18 S LEAN vertical machining centre. Contact us for further details.
x-travel: 350 mm y-travel: 200 mm z-travel: 350 mm table surface area: 700 x 280 mm spindle taper: SK 40 : 150 - 1660 U/min feeds: 25 - 285 mm/min rapid traverse: 1 m/min quill stroke: 80 mm milling-head swivable +/-: 45 ° total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1050 mm y-travel: 560 mm z-travel: 510 mm table-size: 1200 x 560 mm spindle taper ISO: 50 turning speed range: 15 - 4000 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical: 10 m/min distance spindle nose and table: 150 - 660 mm distance spindle center to column: max. 650 mm table load: max . 1 t no. of tools in magazin: 24 tool diameter: 110 mm workpiece length: 350 mm weight of tools max.: 15 kg spindle drive: 7,5 kW control: FANUC 11 MA total power requirement: 13 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 3,55 x 2,64 x 2,68 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight: 350 kg Dimensions (L/W/H): 1930,0 × 1850,0 × 2490,0 mm x-axis: 610 mm y-travel: 305 mm z-travel: 520 mm table length: 760 mm table width: 360 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis Hurco VMX42U vertical machining centre was manufactured in 2014. It features an impressive X-axis travel of 1,067 mm, Y-axis travel of 610 mm, and Z-axis travel of 520 mm. The machine includes an integrated tilting rotary table and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42U machine we have for sale. Contact us for further details.
The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets
This 3-axis Bridgeport XP3-610 (VMC-610 XP3) was manufactured in 2005. It features an X-axis travel of 610 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 900 × 500 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport XP3-610 vertical machining centre we have for sale. Contact us for further details.
Capacity: 10.4 m3/h Auction-ID: A1-50763-42
Not tested; Inoperable; For spare parts; Auction-ID: A1-50912-9
Key data: 1050 mm, 510 mm, 560 mm
Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Inv. Num. : 8226 Type: VC 810 Producer: Spinner Created: 2005 Parameters: Control system: Siemens Work table length: 1000 mm Work table width: 600 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 800 mm Y-axis travel: 600 mm Travel Z-axis: 510 mm Machine height: 2600 mm Machine length: 2400 mm Machine width: 2200 mm Machine weight: 6000 kg
Capacity: 17.69 m3/h Auction-ID: A1-50763-28
Capacity: 6.5 m3/h, H= 258.2m Auction-ID: A1-50763-59
Inv. Num. : 8246 Type: XR 1000 Producer: Hardinge Generated: Parameters: Control system: iTNC530 Work table length: 1200 mm Work table width: 600 mm Speed: 12000 1/min X-axis travel: 1020 mm Y-axis travel: 610 mm Travel travel Z-axis: 610 mm Machine weight: 7000 kg
Manufacturer JOHNFORD Model SV-41 + APC – pallet changer Year of manufacture 2007 CNC FANUC 18i MC.2 Table dimensions 1,200 x 600 mm Maximum weight allowed on table 1,200 kg Travel (X / Y / Z) 1,050 / 610 / 610 mm Distance from nose spindle to table 100-700 mm. Distance from spindle center to column 640 mm. Fast feed (X,Y axes) 30,000 mm./min. Fast forward (Z-axis) 20,000 mm./min. Work progress 12,000 mm/min. BT-40 Spindle Cone Maximum spindle speed 60-10,000 rpm Spindle power 7.5 / 11 kW Automatic tool loader Charger type Bidirectional RANDOM Tool loader positions 20 Maximum tool diameter 100 mm Maximum tool length 320 mm Maximum tool weight 10 kg Equipment Internal cooling 20 Bar INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Air conditioning in electrical cabinet INCLUDED Portable steering wheel INCLUDED Automatic pall ...
Inv. Num. : 8242 Type: VC 560 Producer: Spinner Created: 2007 Parameters: Control system: Siemens Work table length: 650 mm Work table width: 480 mm Maximum vertical spindle speed: 6000 1/min X-axis travel: 560 mm Y-axis travel: 400 mm Travel Z axis: 400 mm Cone: SK 40 Number of all tools: 16 pieces Equipment: Cooling
Capacity: 17.69 m3/h Auction-ID: A1-50763-27
Capacity: 4.4 m3/h Auction-ID: A1-50763-43
This 3-axis DMG MORI DMC 635 V ecoline was manufactured in 2014. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMC 635 V ecoline vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Heidenhain TNC 620 V2 Travel X/Y/Z 760/480/480 mm Speed 12000 rpm. Tool magazine for 24 tools SK40 Table size 900x410 mm Conveyor
This 3-axis HAAS VF-2YT-EU was manufactured in 2023. It features an X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a powerful 20 HP motor and a maximum spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2YT-EU vertical machining centre we have for sale. Contact us for further details.
Inv. Num. : 8267 Type: S56 Producer: Makino Created: 2009 Parameters: Control system: FANUC 310is Work table length: 1000 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Maximum vertical spindle speed: 20000 1/min X-axis travel: 900 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Cone: HSK-A63 Number of all tools: 30 pieces Machine height: 3063 mm Machine length: 3302 mm Machine width: 2570 mm Machine weight: 7500 kg
VEB Erfurt FQ 400 Heavy-Duty Vertical Milling Machine Manufacturer: VEB Starkstrom-Anlagenbau Erfurt Model: FQ 400 Equipment type: Vertical Milling Machine Year: 1981 Serial number: 8-34 739/1 Country of manufacture: German Democratic Republic (GDR) Heavy-duty conventional vertical milling machine designed for general milling, face milling, slotting and machining of medium-to-large metal workpieces. Technical specifications: X-axis travel: 1,250 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Tool interface: SK50 Connected load: 25 kW Electrical supply: 380 V, 3-phase, 50 Hz Rated current: 55 A Control voltage: 220/24 V, 50 Hz Signalling voltage: 24 V Protection: IP40 Equipment / features: Vertical milling head Large T-slot worktable Iskra NP37 digital readout Manual machine controls Operator control panel Separate electrical cabinet Approx. dimen ...
VEB Erfurt Electronic FQ 400 Heavy-Duty Vertical Milling Machine Manufacturer: VEB Erfurt Electronic (Friedrich Engels) Model: FQ 400 Equipment type: Vertical Milling Machine Year: 1985 Serial number: 45852-04/3 Country of manufacture: German Democratic Republic (GDR) Heavy-duty conventional vertical milling machine designed for general milling, face milling, slotting and machining of medium-to-large metal workpieces. Technical specifications: X-axis travel: 1,250 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Tool interface: SK50 Connected load: 25 kW Electrical supply: 380 V, 3-phase, 50 Hz Rated current: 55 A Control voltage: 220 V, 50 Hz Signalling voltage: 24 V, 50 Hz Equipment / features: Vertical milling head Large T-slot worktable Digital readout Manual machine controls Operator control panel Separate electrical cabinet Approx. dimensions ...
Manufacturer: Harwi, Type: Piranha 1550, Year: 2015, Cutting lenght mm: 3300, Cutting depth mm: 1550, Working hight mm: 55, Saw Blade Diameter mm: 250, Main engine kW: 3, Wight approx. kg: 485, Year :2015
x-travel: 1250 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16 ...
FAS Vertical conveyor box elevator 4770x950x1200 RA2400 Make: FAS Direction of travel: the elevator can be accessed from both sides Vertical transport height: Flexible adjustment of input and output levels and also intermediate levels Maximum size of transported goods: 850x380xXXX mm LxWxH Overall height: 4770 mm Frame width (NB): 950 mm Frame depth: 1200 mm Height of feet: 75 mm Motor : SEW motor 380-500V Disassembled into two parts 2400x950x1200mm Scope of delivery: including supports, side guides, light barriers, terminal box Optionally available: Frequency converter Height adjustment Leading and trailing conveyor technology Control system Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Length base: 1200 Breite Basis: 950 Bauhöhe in mm (BH): 4770 nominal voltage: 380-500V Engine type: SEW Eurodrive Transporthöhe mm: Variabel verstellbar ...
Nerak vertical Z conveyor 2500-750-650-350 Stainless steel food grade RA1961 Make: Nerak Material: Stainless steel food grade Running direction: both directions Vertical transport height: 2500 mm Maximum size of transported material: 750x650x350 mm LxWxH Overall height: 3300 mm scaffold width (NB): 1155 mm Height feet: 150 mm return rollers: 20 pcs. Motor : SEW motor 380-500V Conveying speed: 0,45m/s Scope of delivery: including supports, without side guide, light barriers, terminal box. Optionally available: Frequency converter Features: Length base: 1700 Breite Basis: 1155 Bauhöhe in mm (BH): 3300 nominal voltage: 380-500V Engine type: SEW Eurodrive Transporthöhe mm: 2500 Transportgut LxBxH mm: 750x650x350 scope of delivery: including supports, Klemmkasten, Lichtschranken For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be hap ...
This 4-axis Hardinge Bridgeport GX 710 was manufactured in 2011. It features impressive travels of 710 mm in the X-axis, 400 mm in the Y-axis, and 430 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 20 tools. If you are looking to get high-quality machining capabilities, consider the Hardinge Bridgeport GX 710 vertical machining centre we have for sale. Contact us for further details.
Vertical machining centre manufactured in 1997. This DONAU Danumeric 440 features a drilling capacity of 40 mm in solid steel and 50 mm in cast iron. It offers a spindle speed range of 15 – 2,800 rpm and a quill travel of 200 mm. The standard work table dimensions are 600 x 1,200 mm. If you are looking to get high-quality machining capabilities, consider the DONAU Danumeric 440 machine we have for sale. Contact us for further details.
This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details.
Vertical machining centre manufactured in 2005. This Fidia G996 RT features a robust CNC control system and a maximum spindle speed of 24,000 rpm. It includes a rotary-tilting table with a diameter of 800 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Fidia G996 RT machine we have for sale. Contact us for further details.
Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.
A vertical CNC machining center is offered. Heidenhain CNC control. Equipped with: Tool magazine with tool changer, chip conveyor, enclosed work area with safety doors, separate CNC control panel. Weight: approx. 13000kg. The machine is defective and therefore in need of repair. Viewing possible by appointment.
This 3-axis DECKEL MAHO DMC 1035 was manufactured in 2008. It features a travel of 1035 mm on the X-axis, 560 mm on the Y-axis, and 510 mm on the Z-axis. The machine is equipped with a Siemens 840D control unit and a spindle speed of 14,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 vertical machining centre we have for sale. Contact us for further details.
This 3-axis WEMAS VZ 1250 was manufactured in 2019. It features a robust tool changer with approximately 24–30 stations and comes fully functional and freshly serviced. The machine includes vises, an external tool cabinet with an extensive set of tool holders, collets, and milling/drilling tooling. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1250 vertical machining centre we have for sale. Contact us for further details.
Unused vertical stainless steel tank, capacity: 600 liters. 5 pieces available.
Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement
This 3-axis Bridgeport VMC1000 XP3 was manufactured in 2005. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a worktable with dimensions of 1200 × 600 mm and a maximum table load of 900 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC1000 XP3 vertical machining centre we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
250 € 
