vertical turret lathe used for sale

turning diameter over bed: 460 mm turning length: 1250 mm centre height: 230 mm centre distance: 1250 mm spindle turning speed range: 35 - 1800 U/min weight of the machine ca.: 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 2100 mm centre height: 250 mm : mm spindle bore: 60 mm spindle turning speed range: 11 - 2000 U/min total power requirement: 7,0 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

greates pass round over bed: 810 mm swing diameter over face slide: 560 mm centre distance: 2000 mm bed width: 480 mm slide valve travel: 400 mm upper head travel: 180 mm turning tool - shaft cross cut: 32 x 25 mm power capacity: 22 kW max. torque on the spindle: 3200 Nm spindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mm spindle bore: 106 mm turning speed range: 9 - 1800 U/min turning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/U face feeds: 0,046 - 20 mm/U metric threading: 0,5-112 mm inch threading: 1/4 - 56 G/1 thread - module: 0,125 - 28 mm thread - DP: 1 - 224 Pitch tailstock quill diameter: 115 mm quill stroke: 225 mm taper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kg max. workpiece weight -without tailstock: 750 kg 3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mm weight: ca. 4300 kg Number of feed stages and threads: 99  ...

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

turning diameter over bed: 370 mm turning diameter over slide rest: 200 mm turning length: 1000 mm centre height: 185 mm spindle bore: 56 mm tailstock quill taper MT: 4 turning speeds: 50 - 2000 U/min power capacity: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

turning diameter over bed: 460 mm turning diameter over slide rest: 280 mm turning length: 1000 mm centre height: 230 mm : 720 mm spindle bore: 53 mm spindle turning speed range: 28 - 1250 U/min total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

greates pass round over bed: 540 mm swing diameter over face slide: 370 mm centre distance: 3000 mm centre height: 270 mm turning dia. in gap: 815 mm bed width: 344 mm spindle bore: 88 mm spindle diameter in front bearing: 133 mm spindle taper: 11 D1 Camlock turning speed range: 18-1400 U/min turning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mm face feeds: 0,03-0,5 mm metric threading: 0,4-14 mm inch threading: 2-72 G/1 thread - module: 0,3-3,5 mm thread - DP: 8-60 Pitch tailstock quill diameter: 75 mm quill stroke: 230 mm taper of tail spindle: MK 5 slide valve travel: 280 mm upper head travel: 150 mm Overall size: ca. 4700 x 1100 x 1400 mm weight: ca. 3200 kg power capacity: 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rea ...

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

turning diameter over bed: 410 mm turning diameter over slide rest: 220 mm turning length: 1000 mm centre height: 205 mm : mm spindle bore: 46 mm spindle turning speed range: 40 - 2000 U/min total power requirement: 22,0 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW spindle turning speed - stepless: 30-3000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: incl.transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

turning diameter over bed: 660 mm turning diameter over slide rest: 450 mm turning length: 2000- 2880 mm throat: Ø 1200 x 880 mm Height of centres: 330 mm spindle passage: 85 mm turning speed range: 10- 700 U/min tail stock: MK 5 transmission ratio: 24 tool holder: Multifix C dimensions: 3,5/4,4 x 1,45 x 1,1 m weight of the machine ca.: 4,2 t konv. lathe with movable bed for long gap. - movable bed 880 mm - swing Ø in gap: Ø 1400 mm - 3- jaw chuck Ø 315 mm - facing plate Ø 800 mm - facing plate Ø 500 mm - rapid travers - some tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

turning diameter over bed: 330 mm turning diameter over slide rest: 165 mm turning length: 800 mm total power requirement: 3 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2 x 1 x 1,5 m No. 1009 Lathe WEILER LZ-300 Speed range 24-2800 1/min. Feed rates 0.013-1.27 mm/min Space requirement approx. 19 0x 700 mm, Weight approx. 700 kg. The e-lead spindle is removed from the machine 3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessories tool cabinet with various accessories. Working area: 165 x 600 Drive: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm : 370 mm : 3000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1090 mm turning diameter over slide rest: 700 mm turning length: 6000 mm centre distance: 6000 mm spindle bore: - mm spindle taper: - turning speed range: U/min power requirement: 30 kW 3-jaw-chuck diameter: mm quick change toolholder: 4 fach Stahlhalter taper in tailstock-quill: MK 6 dia. of quill: 125 mm quill stroke: 260 mm total power requirement: 30 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 8,2 x 1,8 x 1,82 m - rapid traverse - tail stock - DRO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5+1+1,8 m Movie: https://www.youtube.com/watch?v=ckpr4-sE7K4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 430 mm turning diameter over slide rest: 230 mm turning length: 1000 mm centre height: 215 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 19 - 2000 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,9 t dimensions of machine L x W x H: 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 600 mm weight of the machine ca.: 400 kg spindle passage: 26 mm speeds: 55-2000 U/min total power requirement: 1,4 kW dimensions of the machine ca.: 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

WEILER CONDOR VS 2 from university (test laboratory) -Guided tours "as good as new" -Three-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage 40mm -Thread/Metric/Inch etc. -Collets - quick clamping device incl. collets -Vierbackenfutter-Röhm -Face Plate -Four-jaw chuck faceplate -Lining protection -Multifix with inserts -Emergency stop -Documentation -Unless otherwise stated, the price is /net/ plus VAT -Invoice will be issued Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.