vertical turret lathe used for sale

HAMLET COMMODOR incl. Three-axis digital display Turning length max. 1000mm Turning diameter max. 380mm Turning diameter over support 190mm Rod passage 56mm Speed range 25-2000 rpm Automatic longitudinal/face feeds Eeipidd Thread/Metric/Inch/etc Drive power 4 KW Tailstock MK4 Three-jaw chuck - Röhm 200mm Quick-change bracket incl. 3 inserts Bed stop Chip back wall Coolant system Feed protection 2 x EMERGENCY /OFF Machine Documentation Dimensions: LxWxH 2.7x1.5x1.8 meters Weight approx. 1.6 tons

Key data: 250 mm, 500 mm

Circulation diameter over bed 500 mm Max. turning length 1,600 mm Connected load 5.5 kW Machine weight 4.4 t

Key data: 180 mm, 360 mm, 14 U/min

Center height 180 mm Center width 750 mm Circulation diameter over bed 360 mm Spindle bore 41 mm Spindle speed range, stepped 14 – 2,800 rpm Machine weight 1.9 t Connected load 6.5 kW

HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

MEUSER M II S gap bed engine screw cutting lathe Swing over ways 600 mm Swing over cross slide 400 mm Swing in gap 860 mm Turning length 1500 mm Spindle speed 1200 rpm Steady rest Chucks- 3 pcs Threads metric & English Weight ca. 2500 kg

Center height: 285 mm Center width: 1500 mm Circumferential Ø: above bed 580 mm Spindle bore: 72 mm Spindle mount: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 20 - 2000 rpm Feeds: longitudinal/flat 0.05-16.32/0.025-8.16 mm/rev Thread pitches: 0.5 - 120 mm Electrical connection: 400 V, approx. 10 kW Dimensions: 3000 x 1250 x 1550 mm Weight: 2860 kg

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Coolant device - Machine light - Machine feet

Offer 24009 Specifications: - Center height 200 mm - Center width 1500 mm - Maximum circulation – Ø above bed 400 mm - over face carriage 210 mm - Spindle bore 56 mm - Pick-up cone of the tailstock quill MK 5 - Tailstock quill travel 150 mm - Spindle speeds 11 - 2240 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrically pitsch thread - Drive 400 V / 7.5 kW - 3 jaw chuck - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 63 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 5 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 - 0.800 mm/rev Weight, approx.: 1500 mm Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 3-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Bed stop - Rotating grain tip - Coolant device - Emergency stop push button - Machine light

Key data: 160 mm

Year of construction: 2003 Top height: 160mm Center width: 650mm Spindle bore: Ø 40mm Circulation over bed 320 mm Spindle speed: 20-2500 Tailstock mount: MK3 Quill Stroke: 85mm Quill diameter 40 mm Longitudinal carriage feed range: 0.020 - 0.630 mm/rev Feed range face slide: 0.006 - 0.200mm/rev Possible thread types: Metric, Inch, Modulus, Diametrical Pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Main motor 3.5 kW Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 710kg Accessories as shown in the pictures: 3-axis digital display, coolant device, chuck protection, 4-jaw chuck, punch pliers and other collet equipment incl. Collets, Multifix with 2 inserts, manuals.

Slotting machine CABE 170 ST -Stroke adjustable up to max. 170mm -Projection to the middle of tool holder +- 275mm -Swivel butt head Right/Left -Rotary table - three-jaw chuck approx. 200mm -Tool cabinet with approx. 30 pieces - Push chisel Dimensions: LxWxH 1.1x0.7x1.7 meters Weight approx. 700Kg Blv0xavcuuo

Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan

max. turning length: approx. 750 mm, spindle bore 40 mm, max. 1800 rpm, with Multifix quick-release system, coolant device and 3-axis digital display, Fabr. ELESTA

max. turning length: approx. 2000 mm, centre height: approx. 300 mm, hollow spindle diameter: approx. 100 mm, with Multifix clamping system

Center height: approx. 250 mm, max. turning length: approx. 2000 mm, hollow spindle diameter: approx. 12 mm, with 3-axis digital display, Fabr. HEIDENHAIN, machine light, Multifix quick-release system

max. turning length: 3000 mm, center height: approx. 300 mm, hollow spindle diameter: 100 mm, with 3-axis digital angle, Fabr. SONY, 1 three-jaw chuck, Multifix quick-release system and coolant device

Specifications: Center height: 220 mm Center width: 1000 mm Spindle bore: 55 mm Bed width: 430 mm Speeds, 2 stages: 18 - 1800 1/min Tailstock mount: MK 4 Quill stroke: 190 mm Feed rate: 0.30 - 3.26 mm/rev Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm Equipment: - Quick-change holder System Multifix - Bed stop - Coolant device -Mudguard - Turning chuck protection with restart protection

Article number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  ...

Article number: 04-03-141 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1986 L x W x H: approx. 2000x1000x1700mm Weight: approx. 900kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø340mm Max. turning diameter via support: approx. Ø185mm Max.turning length: approx. 800mm Rod passage: approx. Ø42mm Spindle: Speed range: approx. 30-2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.016-0.50mm/rev Suitable for threads: metric 0.18 – 28 mm inches 80 – 1 gg/" Diametrical – Pitch Thread 200 – 2 3/4 Dp Module 0.1 – 9 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size ...

Article number: 04-03-117 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  ...

Article number: 04-03-224 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1987 L x W x H: approx. 1500x1000x1700mm Weight: approx. 600kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø280mm Max. turning diameter via support: approx. Ø160mm Max.turning length: approx. 500mm Rod passage: approx. Ø36mm Spindle: Speed range: approx. 15-3550 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.05-0.80mm/rev Suitable for threads: metric 0.20 – 12 mm inches 80 – 2 gg/" Diametrical – Pitch Thread 160 – 6 Dp Module 0.1 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert   ...

Article number: 04-03-218 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

Article number: 04-03-165 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø475mm Max. turning diameter via support: approx. Ø270mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 13-2000 rpm Spindle nose: A 2-6 Drive power: approx. 7.5kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.014-1.00 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 ins ...

Article number: 04-03-147 Manufacturer: Weiler Very good general condition Machine geometrically overhauled Delivery time: on request - subject to prior sale Year of construction: as good as new L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 3.8kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: metric 0.30-10mm inches 80 – 2 3/4 gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release ...

Article number: 04-03-110 Manufacturer: Weisser Heilbronn Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 3500x1000x1700mm Weight: approx. 3500kg Digital display: 2-axis digital display Heidenhain Dimensions: Max. turning diameter over bed: approx. Ø425mm Max. turning diameter via support: approx. Ø240mm Max.turning length: approx. 2000mm Rod passage: approx. Ø58mm Spindle: Speed range: approx. 28-2500 rpm Spindle nose: A 2-5 Drive power: approx. 5.5kW Tailstock: MK4 Accessories  3 – jaws – chuck Schunk Ø 250 mm  Quick-release steel bracket + 4 inserts  Electric feed protection  Work light  Complete machine documentation  NOT – Off  Various tension wrenches  Coolant device  L+Z spindle cover  Machine feet  Various turning steels � ...

Article number: 04-03-118 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1987 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  Bed stop  Work light  Coolant Device New ...

Article number: 04-03-220 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert  Bed stop  Work Light New  Coolant Device New  Complete documentation  N ...

Article number: 04-03-226 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1994 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Key data: 315 mm, 630 mm, 10 U/min

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,

ROVEMA, BOSCH, HASSIA-REDATRON, usw. vertikale Schlauchbeutelmaschinen in gutem Zustand, betriebsfertig oder (general)überholt, in Lager und Werkstatt

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Rovema bagging machines VPX, VPI, VPL, partially or completely overhauled, Siemens S7-300, depending on customer requirements and requirements, incl. dosages such as snail dosing, cup dosing, multi-head scales

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Normal steel Volume: 25 litres, drive: 3 kW

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

Description The Mark Tecno MCM Model 3 EEN ID 0078 Status Active Location Oradea (RO) Electric Rotisserie Tecno MCM 3 EEN with a capacity of 18 Cubs, power: voltage: 14.4 kW, 400 V, dimensions (L x w x h): 1098 x 480 x 820 mm, weight: 80 kg. Missing string, otherwise it's perfectly functional. ExWorks. Price is negotiable and do not include VAT. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Watching the product schedule 24 hours prior. We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.

Vertical pallet transport

Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85