136,426 used machines on RESALE, but how to find them? Machine Search
The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle, tapered roller bearings and v-ledges. Camlock mount C4, top slide ratatable by 360°, tailstock adjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Center height 140mm Distance between centers 650 mm max. turning diameter 289 mm Spindle bore 38 mm Spindle cone MK 5 Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPM Speeds 2 Main motor power 1,5 kW S6 Voltage 230 Volt Weight 230 kg Standard equipment: 3-jaw chuck 160 mm with changeable jaws for internal turning center point Optional equipment: 2 axis digita ...
Metal lathe Mammut CD6250B, good condition, built in 2006, standard equipment, 6 kW, 1500 mm center width, 250 mm center height, 2000 kgPrices subject to change, errors, printing and typesetting errors excepted
Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E
Hans Schreiner Metal LatheSuperut 1500 DigitalTechnical data:Center height 250 mm, center width 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock cone MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output power 7.5 kW, max. diameter over face slide 300 mm, max. turning diameter i.d. bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, transverse feed 0.02 - 1.35 mm/revolution, metr. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 gears/inch, module thread module 0.5 - 3.5, thread diametrically pitch 56 - 8,
Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted
Lathe Hans Schreiner MDB-S900, YOC 2015, good condition, 1.5 kW , 900 mm center height, 165 mm center height, 65-1810 rpm, 500 kgPrices subject to change, errors, printing and typesetting errors excepted
The new professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. The tailstock has quick adjustment, the headstock has a hollow spindle with Mk 2 mount also in the tailstock. 36 pitch with latching. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 1000 mm Center height 254 mm Tail stock thread M33 Din 800 Motor power 2,25 kW, S1 Speeds variable 100-1350 100-3550 rpm Voltage 230 V Weight 240 kg Optional: Outturning extension (increases the center height by approx. 220 mm or lengthens the center distance by approx. 460 mm)
The new small professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 640 mm Dist between centers with opt. extension 1120 mm Center height 204 mm Tail stock thread M33 Din 800 Motor power 2,2 kW, S6 Speeds variable 100-1200 100-3200 rpm Voltage 230 V Weight 135 kg
A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.
multifix: ja digital: ja centre distance: 1000 mm : 440 length: 2000 mm width: 1400 mm height: 1500 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 610 mm, 375 mm
The machine is in very good condition and still under power. Pick-up can be arranged at short notice.
greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3 multifix: ja weight: 2 t : 500 centre distance: 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1230x490x2120 mm Weight: 200 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.
centre distance: 2000 mm : 600 weight of the machine ca.: 3,2 t Passage 49 mm Digital Lynette The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible.
Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1) ...
A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible.
Key data: 5000 mm, 8000 mm, 4000 mm
Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...
control: Haas Automatic : 3 Backen x-travel: 850 mm changer: 12 fach serial number: 70422 total power requirement: 22 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 2.800 mm diameter of spindle flange: 1.100 mm max. swing diameter: 3.000 mm control: 840 D sl Siemens Main spindle:: turning speed range - main spindle: max. 230 min/-1 power capacity - main spindel: 206 kW max. Torque: 53.000 Nm max. load: - kg C-Axis: Tool Mount:: Rechts / Right tool taper: Capto C8 swivellable: B: 0 - 270 ° Spindle speed - driven tool pos.: max. 6.000 min -1 max. Torque: 120 Nm Tool Mount:: Links / Left tool taper: Capto C8 tool magazin:: Rechts / Right number of toolpositions: 41 pos. max. tool weight: 20 kg max. tool length: 400 mm workpiece diameter at full load: 150 mm tool taper: Capto C8 tool magazin:: Links / Left number of toolpositions: 25 pos. workpiece diameter at full load: 150 mm max. tool weight: 20 kg max. tool length: 400 mm tool taper: Capto C8 axis stroke:: x-axis: 1: 2.700 mm x-axis: 2: 2.700 mm z-axis: ( 2x 1.000 ) mm fee ...
turning diameter: 300 mm turning length: 1700 mm swing diameter over bed slide: 600 mm total power requirement: 12,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg
turning diameter: 400 mm turning length: 1000 mm control: FAGOR control: CNC 8055/B-T centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 210 mm bed width: 300 mm spindle bore: 65 mm spindle turning speed range: 0 - 3000 U/min transmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/min feeds - cross: 0 - 10.000 mm/min rapid travel - longitudinal/face: 15 m/min tailstock quill diameter: 68 mm tailstock quill stroke: 155 mm tailstock taper MT: 4 total power requirement: 8 kW weight of the machine ca.: t dimensions: 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 220 mm turning length: 250 mm control: SIEMENS SINUMERIK 820 T swing diameter: 380 mm chucking diameter: 250 mm x-travel: 200 mm z-travel: 250 mm spindle turning speed range: bis 4000 U/min rapid travel - longitudinal/face: 15 m/min total power requirement: 27,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2500 mm, 2100 mm, 20000 mm
Max Workpiece Diameter: 2,500 mm (over bed) / 2,100 mm (over carriage) Max Turning Length: 20,000 mm Max Workpiece Weight: 50,000 kg (50 metric tons) Main Motor: SIEMENS (164 kW)
Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg
turning diameter over bed: 1450 mm turning diameter over slide rest: 950 mm turning length: 4000 mm centre height: 725 mm faceplate diameter: 1000 mm travel -x axis: 980 mm travel -z axis: 4000 mm workpiece weight: 2 to turning speed range: 1,5 - 1000 U/min spindle hollow: 500 mm Control: Siemens 828D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - CNC Control Siemens 828D - Front and Rear 1000mm dia. 4 – chucks - Tailstock - Chip Conveyor - Boring Bar 1500 mm x 120 mm - Boring Bar 1690 mm x 120 mm - Boring Bar 1000 mm x 80 mm - Boring Bar 1500 mm x 100 mm - Quantity of KM Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc 31/32 i : 2 chucking diameter: 170 mm swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm length: 2500 mm width: 1900 mm height: 2300 mm weight: 5500 kg turning height: mm turning diameter: mm swing diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 8 spindle passage: 36 mm turning length: 250 mm spindle bearing diameter: 358,2 mm bar material dia.: 36 mm bar length: 4000 mm longitudinal slide -travel: 145 / 250 mm cross slide - travel: 80 mm spindle turning speed - stepless: 560 - 4000 U/min spindle motor: 28 kW Total weight, approx.: 8500 kg dimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm - Beckhoff CNC control system (Win2000) - IEMCA 4m bar feeder (PRA52/P-Typ42) + Hydraulic catch chute + Mechanical end-piece chute with container + Parts conveyor belt + 3–4 bar oil connection + 100 bar high-pressure connection + 1 HYDAC hydraulic oil cooler + 1 oil cooler for cutting oil + 1 chip conveyor + 1 magnetic roller for sludge removal + 1 new air conditioning unit for control cabinet / year of manufacture 2025 + Feed block: new brass strips fitted in 2023, making the machine as good as new + Spindle coup ...
Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.
Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg
Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm
Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg
Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg
tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg
Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Weight: 9.8 kg
Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg
A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.
High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors
maximum number of results exceeded
please refine your search
