vertical turret lathe used for sale

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

MANDRINO NASO: ASA A2-8 BAR PASS: 90 MM ROUND NUMBER: RPM 2500 COURSE AXIS X: 300 MM COURSE ASSE Z: 1250 MM TURNING DIAMETER: 500 MM TURNING LENGTH: 1200 MM IDRAULIC AUTOCENTRANTE TOOL COUNT: 12 CONTROL: FANUC Oi-TD YEAR: 2010

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.

Key data: 630 mm, 2000 mm, 400 mm

Sell a well-preserved lathe from WMW model DLZ 630 x 2000. The machine is in good condition. The dimensions of the machine are LxWxH 4200mm x 1600mm x 1400mm. Spindle passage is 62mm. The machine was completely cleaned. Incl. guideline and sitting skirt. If you have any further questions, please contact us. The machine can be inspected and tested under power by prior appointment. On-site loading is no problem and free of charge. Furthermore, the machine can be delivered in the immediate vicinity and against assumption of costs, with its own truck. A suitable unloading facility must be available for this purpose. The sale is without guarantee and warranty. All information without guarantee.

Bridgeport EZ Path S Used machine (very good) Control type Cnc Built 2001 Hours K.a. Price 12,500 € net plus VAT Dimensions 3100x1850x1500 Weight 2500 kg Location Haiger Description Universal CNC cycle deer of the brand Bridgeport suitable for tooling, fixture construction, training as well as mold making • Circulation diameter: 430mm • Control: Fanuc 20T Technical data • Circulation diameter 430mm • Peak width 1000mm • Control Siemens Fanuc 20 T • Reitstock MK 4 • Multifix tool station • Speed 1-4000rpm • Connection 380V - 7.5 KW

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Stop for lathe support, longitudinal stop, lathe, support stop -Recording dimensions: see photos -Clamping height: 22 mm -Support length: 100 mm -Quantity: 1x holder available -Dimensions: 150/50/H95 mm -Weight: 2.6 kg

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Merli Clovis 70 heavy lathe. Distance between centers: 8000mm. Swing: 1650mm. Swing in carriage: 1170mm. Bore: 206mm. Bed width: 1000mm. Speeds: 16.(3-300). Maximun weight without steady rest: 15.000Kgs. Maximun weight with 1 steady rest: 20.000Kgs. Equipped with chuck of 1400mm. Equipped with DRO. Equipped with 2 steady rest. Equipped with CE protections and CE certificate for second hand machines.

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

Various spare parts for Oerlikon lathes.

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 4000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Cazeneuve HB500 rebuilt lathe. Distance between centers: 2000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 750mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm turning dia. in gap: 690 mm spindle bore: 58 mm spindle turning speed range: 25-2000 U/min feeds - longitudinal: 0,031-1,7 mm/U voltage: 400 V / 50 Hz total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw  ...

turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mm turning length: 1500 mm swing diameter over bed slide: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Next image can not be found: d833 tacchi mt400 (2) Brand: Tacchi Type: MT400 Distance between centers: 1.500 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 250 mm ø Swing in the gap: 550 mm ø Spindle boring: 130 mm ø 3-Jaw chuck: 390 mm ø Digital read-out Rapid traverse on longitudinal and cross travelling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Benzinger TNL NCS1J Lathe Machine data of the manufacturer, deviations possible. Tip height: 80 mm max turning length 100 mm rotational diameter over. Bed 220 mm rotational diameter over. Flat sledge 140 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz All other technical data can be found in the link. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines