vertical turret lathe used for sale

Key data: 1020 mm, 610 mm, 610 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

Key data: 800 , 400 , 400

CNC controller: Yasnac Axes X-axis travel mm: 800 Y-axis travel mm: 400 Z-axis travel mm: 400 Rapid traverse m/min: 36 Worktable Table dimensions mm: 800 x 400 Spindle Spindle speed rpm: 10.000 Tool system Tool holder: BT-40 Tool magazine slots: 20 Equipment Chip conveyor High pressure pump Rated power kVA: 58 Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

Table clamping surface: 765 x 400 mm Travel x/y/z: 650/410/510 mm Spindle holder: BT 40 small/large distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool positions: 20 pieces Feeds: approx. 30 m/min Rapid traverse: approx. 30 m/min electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2300 x 2100 x 2650 mm Weight: 4000 kg

Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement

axis stroke (X,Y,Z): 550 x 300 x 425 mm Number of spindle head vertical: 0 St. Number of spindles head horizontal: 0 St. Number of tools: 0 St. Dust suction hood: --- mm Number of milling agregates: --- St. working dimensions: --- mm Year: 1998 Boring power: --- mm Speed of boring spindles: --- U/min. Speed: --- U/min. Required air-pressure: bar Diameter of the saw arbor: mm total power requirement: kw Weight: kg Dimensions (L/W/H): mm Motor output: kW Capacity: kg/h Sawing unit: Sawblade tiltable: ° Saw blade diameter: mm Control: Siemens Sinumerik The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

Inv. Num. : 4891 Type: VHC3-XTS Produzent: AXA Erzeugt: 2014 Parametern: Steuerungssystem: Heidenhain iTNC530 Einschaltstunden: 22010 h Betriebsstunden: 7118 h Arbeitstischlänge: 2200 mm Arbeitstischbreite: 700 mm Maximale Tischbelastung (gleichmäßig): 3000 kg Anzahl der Achsen: 5 Stücke Minimale Vertikalspindeldrehzahl: 20 1/min Maximale Vertikalspindeldrehzahl: 10000 1/min Verfahrwege X-Achse: 2600 mm Verfahrwege Y-Achse: 1000 mm Verfahrwege Z-Achse: 950 mm Kegel: SK40 Ausstattung: Achse C - integrierter NC-Drehtisch mit einem Durchmesser von 800 mm Achse B - Spindelneigung /- 100° Teiler zum Teilen des Arbeitsbereichs Sonde Schraubstock

Control Ultimax 4 Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Speed 12,500 min-1 Tool magazine for 24 Wkz., SK 40

Key data: 1050 mm, 530 mm, 510 mm

Inv. Num. : 7734 Type: VCS 530 Producer: MAZAK Created: 2015 Parameters: Control system: MAZATROL MATRIX 2 Work table length: 1300 mm Work table width: 550 mm Number of synchronized axes: 3 Maximum table load (uniform): 1200 kg Number of stacking positions: 30 Speed: 10-1000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel (spindle and pinola): 510 mm Cone: ISO 40 IKZ: 15 bar Machine weight: 7700 kg Equipment: Tool probe Workpiece Probe Oil Mist Separator IKZ Oil mist extraction Number of pallets: 2

Inv. Num. : 7737 Type: Alpha-T14 iD Producer: FANUC Robodrill Created: 2004 Parameters: Control system: Fanuc series 16i-MB Switch-on hours: 23500 h Work table length: 750 mm Work table width: 380 mm Cone: BT30

Curved plate chain with attachable gripper material LFG and NFG as good as new, partly in original packaging Number and lengths see pictures Price per m

Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 4,6 x 2,4 x 2,7 m Brand Deckel Maho Machine no F631 Type DMC 80 U hi-dyn CNC Brand Siemens CNC Type 840D Year of make 2003 Table length 800 mm Table width 630 mm Number of pallets 2 X 800 mm Y 700 mm Z 600 mm Spindle taper HSK-A 100 Tool changer 60 Maximum pallet load 800 kg Nutrition 20 - 1500 mm/min Chip transport Machine size 4.600 x 2.400 x 2.700 mm Machine weight 10.500 kg Tool magazine positions: 60 Heidenhain TS 642 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Key data: 1000 mm, 600 mm, 700 mm

Ref.Nr. 00837 Name of the system: Vertical machining center Manufacturer: AXA Model VSC 2-M Year of construction 2000 Operating hours control on 51.155 h:56:02 Machine One 108350:06:047 Program run 34892:28:03 X axis stroke 2360mm/2 x 1000mm Y axis stroke 600mm Z axis stroke 700mm 1 spindle design SK 40 DIN 69 871 A 1 tool changer for 22 mounts side version 1 control panel with CNC path control Heidenhain TNC 426/430 on the left side of the machine 1 control cabinet integrated in the back of the machine Ball screws make Deutsche Star X axis 1510 – 4 – 3914 Ǿ 40 x 20 x 2960lg. Y axis 1510 – 4 – 5103 Ǿ 49 x 29 x 1300 lg. Z axis 1510 – 4 – 4811 Ǿ 40 x 10 x 1190 lg. Measuring system: Make Heidenhain X axis: LS 186 C 2440 ML Y axis: LS 186 C 740 ML Z axis: LS 186 C 940 ML Central lubrication aggregate make Bielomatik Hydraulic ...

Key data: 3300 mm, 2300 mm, 1000 mm

Control Siemens 840D Table size 3,500 x 1,250 mm X-travel (longitudinal) 3,300 mm Y-travel (cross) 2,300 mm Z-travel (vertical) 1,000 mm Spindle HSK 100 Rapid traverse X-axis 25m/min Rapid traverse Y-axis 40m/min Workpiece weight 9.000 kg R.P.M. 100 – 12,000 kW 70 Volts 400 Cycles 50 Including: Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees – C-axis +/- 190 degrees.

CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Key data: 635 mm, 510 mm, 460 mm

CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions

Key data: 11000 mm, 3000 mm, 1500 mm

X axis 11.000mm Y axis 3.000mm Z axis 700mm W axis 800mm Spindle diameter 160mm Spindle taper iso 50 Spindle speed 1.800 rpm Spindle power 65kw ATC 60 positions Yom 1995 Nr 02 rotary table:-2.500x2.500mm capacity 25 ton ( 2 axes controlled) -2.000x2.000mm 15 tons capacity ( 2 axes controlled) One birothative head Two boring heads Floor plates included

Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t

Used machine in good condition. Available for immediate delivery. - Max. tool length: 300/225 [350/225] - Number of tool stations: 33 - Control: HEIDENHAIN ITNC 530 - Working area (X x Y x Z): 650 x 650 x 550 mm - C-axis: 360 ? - Max. tool weight: 10 kg - Operating hours: 51.651 - Axes: 5 - Power: installed max: 16 kW - Weight: 13.000 - Dimensions (long x wide x high): 2.345 x 4.250 x 2.600 mm

- Tool measuring probe RENISHAW TS-23R - Rapid Traverse (X x Y x Z): 36 / 36 / 36 mm/min - Spindle taper: BBT40 - Travel (X x Y x Z): 1.000 x 560 x 600 mm - Number of tool stations: 30 (automatic) - Control: HW F i Series - Max. spindle speed: 12

Table dimensions: 1.300 x 570 mm Courses (X/Y/Z) 1.050 X 570 X 510 mm - Number of tool stations: 30 - Rapid Traverse (X x Y x Z): 36 x 36 x 30 mm/min - Max. spindle speed: 12.000 rpm - Operating hours: 5.456 - Axes: 3

- Auto power-off - Air blower - Chip conveyor - Spindle cooling (oil cooler) - 30 ATCs - Travel (X x Y x Z): 1.020 x 540 x 530 mm - Control: Fanuc 18iMB - Max. spindle speed: 12.000 rpm - Spindle type: BT 40

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 800 x 510 x 630 mm - Working area (X x Y x Z): 950 x 510 mm - Max. workpiece weight: 500 kg - Axes: 3 - Weight: 5.800

- Dataserver - AICC2 (200 blocks of read only) - S pindle cooling (oil cooler) - 30 ATCs - Chip conveyor - Travel (X x Y x Z): 1.000 x 550 x 500 mm - Number of tool stations: 30 - Working area (X x Y x Z): 1.100 x 500 mm - Max. spindle speed:

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 1.060 x 510 x 635 mm - Control: SIEMENS 828D - Working area (X x Y x Z): 1.200 x 500 mm - Max. workpiece weight: 800 kg - Max. spindle speed: 8.000 rpm - Spindle type: BT 40 - Dimensions (long x wide x high): 2.910 x 2.690 x 2.815 mm - Weight: 7.500

Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 A Serial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

- Totally overhauled machine, with a NEW Control + New Crystal Rules - Travel (X x Y x Z): 380 x 380 x 255 mm - Number of tool stations: 6 - Working area (X x Y x Z): 700 x 350 x 2 mm - Max. workpiece weight: 75 kg - Max. spindle speed: 5.000 - 3.

Stehendbogenauslage / Vertical Press-Stacker Delivery MBO SBAP 46-ME Baujahr / Year 1994 - Serial-No. 940114747 Arbeitsbreite mit ME max. 430mm / Working width with ME max. 430mm Bogenlänge / Sheet length min. 80mm Bogenlänge / Sheet length max. 300mm Stapellänge / Pile length max. 730mm Einlaufhöhe / Infeed height min. 380mm Einlaufhöhe / Infeed height max. 950mm Pressdruck / Pressure 20.000 N Mechanische Geschwindigkeit / Mechanical Speed max: 30 – 160 m/min Eigensteuerung // SelfControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Turning Diameter 830 mm Turning lenght 750 mm Spindle speed 2000 rpm Controller FANUC-i Chuck size 24"

Including: - Coolant Tray - Chip conveyor - Number of tool stations: 20 - Spindle power : 15 kW - Backgauge speed (X x Y x Z ): 24 x 24 x 20 mm/s - Travel (X x Y x Z): 762 x 435 x 510 mm - Working area (X x Y x Z): 920 x 436 mm - Max. workpiece weight: 600 kg - Max. spindle speed: 8.000 rpm - Operating hours: 6.700 - Axes: 3 - Weight: 500 - Dimensions (long x wide x high): 2.093 ? 1.962 ? 2.509 mm

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 380 x 300 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 2.2 kW - Control: CNC FANUC SERIE 16iM - Working area (X x Y x Z): 550 x 380 mm - Max. workpiece weight: 250 kg - Max. rapid traverse (X, Y, Z): 48 mm / min - Max. spindle speed: 1.000 rpm - Weight: 1.700 - Dimensions (long x wide x high): 1.565 x 1.907 x 2.216 mm

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 400 x 330 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 5.5 kW - Control: FANUC 16i-M - Working area (X x Y x Z): 600 x 400 mm - Max. workpiece weight: 250 kg - Max. spindle speed: 8.000 rpm - Dimensions (long x wide x high): 3.000 ? 2.000 ? 2.400 mm - Weight: 2.000

roll diameter: 483 mm cutting range: Vert. 508 / Hor. 457 mm Cutting length: 356 mm weight of the machine ca.: 2.3 t dimensions of the machine ca.: 3.05 x 2.05 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Travel (X x Y x Z): 760 x 410 x 510 mm - Control: FANUC Oi-MC - Working area (X x Y x Z): 920 x 430 mm - Max. spindle speed: 8.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.350 x 2.700 x 2.800 mm - Weight: 5.000

Used machine in good condition. Available for immediate delivery. - Rapid Traverse (X x Y x Z): 30.000 mm/min - Rapid Traverse (X x Y x Z): 650 x 400 x 305 mm/min - Number of tool stations: 22 - Spindle taper: BT-30 - Spindle power : 7,4 kW - Max. spindle speed: 16.000 rpm - Max. tool diameter: 80 mm - Max. tool weight: 3 kg - Coolant tank capacity: 200 l - Dimensions (long x wide x high): 3.248 x 1.837 x 2.696 mm - Weight: 3.500

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Used machine in good condition. Available for immediate delivery. - Spindle taper: BBT40 - Max. tool length: 300 - Number of tool stations: 30 - Spindle power : 18.5/11 kW - Rapid Traverse (X x Y x Z): 36 x 36 x 36 mm/min - Travel (X x Y x Z): 900 x 460 x 520 mm - Control: FANUC - Max. workpiece weight: 600 kg - Max. spindle speed: 12.000 rpm - Max. tool diameter: 80 mm - Chip extractor: YES - Internal cooling: YES - High pressure pump: 20 Bar - Axes: 3 - Dimensions (long x wide x high): 2.805 x 2.180 x 3.026 mm - Weight: 5.500

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.